How To Measure Concrete ,Foundation Walling,Hardcore,Murram blinding,Anti-termite treatment & D.P.M

[@MandeJoswa]

Thanks so much for your time remain blessed have understand your explanation it was very clear.

[@NamusabiCatherine]

Thanks you have helped me out

[@easyqs]

Happy to help

[@kasorobodagagamel9572]

Thanks alot am in Uganda and I want an example of taking off for Cavity walls

[@SibongileNeba]

Good job 👏🏾

[@rhodakishoyian2280]

Wow!!! So amazing congratulations for good teaching 🙏🙏

[@easyqs]

It's my pleasure

[@rodgersooko1647]

Hello I want to thank you for your support you have been giving me here please I need a video of schedule of work for reinforcement bars

[@naomikangangi40]

Schedule of work for reinforcement bars?

[@civilengineeringfromgoldme3074]

Good 👍

[@isingomagift]

Thanks for this. Video I have. Got some thing is this the only thing required for taking off substructure

[@naijavr]

No. She has a part 1 video.

[@irshadmohamed8639]

Hello I have been in your channel for long. It has been a long and interesting journey. I am a year three student sitting for knec exams next week. I wanted you to show us how to take off piping works and kitchen cabinet. I would be delighted if you help me

[@JoashKanyesigye]

Waoo. IAM now able to sit for ma exam

[@xasandhuure298]

Good how sbout Taking off of column ?

[@michaeldopez5196]

Umeniokolea sem aky the lextures are really nice 🎉well explained

[@easyqs]

Am glad I helped.Asante sana

[@legesselukas]

Good

[@paneah442]

thank you very much

[@easyqs]

Glad it helped

[@TonnyKyeyune]

Good explanation

[@chepkuruicatherine2819]

Thank you lady

[@aazanekuuisaac7978]

Please sister, l do not understand you at the concrete part. My question is, does concrete measure in square meters or cubic meters?

[@easyqs]

It depends on the method of measurement you are using

[@rashidtowet5200]

I will happy so if I join your class

[@easyqs]

Kindly rech out to me via my email [e-mail] be happy to give you tutorials

[@thomasochumbo4828]

I have a question

[@civilengineeringfromgoldme3074]

Informative

[@easyqs]

Thanks you! Kindly share our videos with your classmates.Thanks alot for watching

[@civilengineeringfromgoldme3074]

@@easyqs *sure* And also expecting from your side for my channel.

[@isaacboateng3247]

Thanks

[@civilengineeringfromgoldme3074]

.... 👍👍

[@easyqs]

Welcome so much

[@otienosamwel1888]

This is great

[@otienosamwel1888]

I would like to join your live class

[@easyqs]

For now we only have membership only classes live.. planning to have subscriber classes in future

[@emmanuelkiwe]

Spot on

[@easyqs]

Thanks so much

[@Happy-yu6lh]

Ma'am I think the height for the height of the brick should be less than 850 mm We said 900 to the gl + 200 footing=1100 From the 1100mm we Ddt 200 footing Ddt 150mm topsoil and Ddt 25 mm reduce level to get 725. So if we say 725 add 175 height of reinstating we get the 900mm

[@paneah442]

we were lookin for the height to formation level not ground

[@idh9395]

@@paneah442 It is still not right in my mind as the ground level is not the same height as the blinding level. We know 200mm footing + 900mm wall + 200mm above ground projection where concrete bed top is, is 1300mm. Then surely you deduct the slab build up that finishes at the same level, i.e. 100mm concrete bed, 25mm blinding layer, and 250mm hardcore bed, giving you 375mm to deduct. This equals 925mm from underside of footing to formation level, OR (975-200) 725mm from top of footing to formation level. Look at the drawing behind her and work through it. I cannot see the area under the formation level to top of slab being 850mm.

[@edwardmarfo1984]

Thank you

[@easyqs]

You're welcome

[@stainbhakensotieno3962]

Hello I was requesting if you can send me your email there is a question of substructure works you did earlier about girth is confusing so I wanted to share it with you

[@easyqs]

[e-mail]