How to Meg a Motor with a Megohmeter - Checking Motor Condition

Megging a motor presented by Katie Nyberg for Galco TV. Buy the items featured in this video at 800-337-1720 or visit: www.galco.com/s...
Megging a motor is a term used to test a 3 phase motor to check the resistance and condition of the motor windings using a megohmeter. These type of motors produce an electrical charge to conduct a resistance reading. If there is a low amount of resistance in Megohms then the motor may need to be serviced or replaced. This test used for preventative maintenance.
Sign up for Galco’s newsletter that features our newest products, our can't-miss deals, our best videos, and total access to Galco’s electronics expertise: www.galco.com/e...
Connect with us!
plus.google.co...
/ galcoindustrial
/ galcoindustrial
/ galco-industrial-elect...
Don't forget to like and comment on this video, and subscribe to our channel!
Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical & Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control & Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits & Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers & Test Stand Applications. Visit us online at www.galco.com or call us at 800-337-1720.
www.galco.com/s...
With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician.
GTV, Galco, galco.com, Galco Industrial Electronics, and Galco Industrial Electronics, Inc. are registered and/or pending registered trademarks under the U.S. Patent and Trademark Office, assumed names, registered domain names, and/or trade names of Galco Industrial Electronics, Inc., a Michigan corporation.
LEGAL DISCLAIMER:
While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Galco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Galco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.

[@kamioool933]

Make sure you have nice ground connection, she put crocodile on paint 🤭🤯

[@TiberiusStorm]

Yes but that was ground on the housing so she really had not other choice.

[@verhillovalakay5393]

Thanks mam beautyfull your my favorate and crash teacher lol hehehe😂😁😀

[@rvdboston9568]

imho, she should NOT rest her palm on the live circuit (motor body) under the test. bad example video

[@Infotainer14]

Can you share motor configuration with Unidrive so 1405 and also parameters needed

[@bhim2234]

hello,a question should not we disconnect the star point connection prior to measurement?thank you

[@kamioool933]

No

[@audievickers132]

Thanks, Katie. Short, to the point, and easy on the eyes.

[@chrisb7051]

Gross dude

[@عليأسعد-ب5و]

سلام بدي قديش بيعطى كهرباء وين الشركه من فضلكم ابعتولي رقم الشركه

[@Froggability]

Huh? Didn't show the readings, nor explain PASS / MARGINAL /FAIL .

[@jesusrperezd]

What about phase winding isolation and testing phase to phase insulation?

[@GalcoIndustrial]

Phase to phase windings are connected together at each motor terminal and are very low resistance. As for "phase-isolation", if you are referring to the windings staying insulated apart from each other, that would be done with an Inductance and milliohm meter. This Video was to demonstrate using a Megohmeter to test a motor that is all.

[@maxquad6846]

You have a point. I was taught to separate the windings when doing the meg test to ground.

[@kuhlmaja]

@@GalcoIndustrial Could you explain that process?

[@user-oc1zq1ej5c]

@@GalcoIndustrial bollocks, should have tested Phase to Phase with a merger.

[@thomasmarable6927]

Great job. Now I can do mine. Lol

[@JohnSchroeder777]

A friend said his father used a megger to hunt for worms in the mud for fishing !

[@GalcoIndustrial]

Some Megger's can generate a lot of voltage. He probably has a 1000volt range on it and it might make the worms want out of the ground if it is shocking them, eh?

[@KAKURYENTE_TV.]

very useful

[@GalcoIndustrial]

+Alvin Andal Thanks!

[@KanubhaiPatel-gn9iz]

fieldwindig

[@electronicatutorial]

Beautiful presentation literally.

[@GalcoIndustrial]

Thank you for your kind words

[@lupojacobo9892]

😁

[@ianfraser2009]

Hi There, great video. I was wonder if you can answer this question. I don't have a megger for testing 3 phase motor. However I am testing phase to earth and getting a reading of 1.000 ohms. Is this normal? I was taught that I should not get any reading on ohms going from phase to earth. I am getting mixed information in the field. Any info would be appreciated.

[@logmeindog]

That sounds like a bad reading to me. Compare that measurement to the other phases/coils.

[@moisesvargas4543]

Bad motor

[@gregadventures2024]

Bad motor but make sure you have all motor leads disconnected from each other

[@abdulqadir150]

Good

[@utahdesertrider1806]

Were you a stewardess? Sounds like it

[@GalcoIndustrial]

You mean a Flight Attendant,,, nope

[@pc2753]

Warning! There is no-one like Katie in this industry.

[@seannot-telling9806]

Thank You for a good demonstration. The audio was nice, crisp and clear.

[@АндрейКузьмин-щ7з1х]

Beautiful women

[@GalcoIndustrial]

Thank you

[@udayveersingh4411]

Thanks mam

[@Tulfonatic-sarcasticsm]

ppe

[@GalcoIndustrial]

If your asking what this means, PPE usually stands for Personal Protection Equipment.

[@37prakhar]

Excellent

[@oetken007]

Tech plus a smart girl, excellent ;-) Thank you for this video.

[@JohnSchroeder777]

Yeah it had a hand crank on it , sounds easier then shoveling!

[@siehayan6073]

😃😃😃😃

[@mohammednafeezn]

Excellent presentation!!

[@wheelie642]

Nicely explained, thank-you.

[@GalcoIndustrial]

Welcome

[@kenwood2874]

Generally? Seriously? What about Phase to phase readings? A lot of motors can't be megged to ground. Only phase to phase. Ohmeter for ground fault.

[@GalcoIndustrial]

Well a Megger is only for phase to ground testing. To do phase to phase you will need a very different piece of equipment. Capable of measuring very low resistances and inductances. A 1HP 3 phase AC motor will have some measurable ohms phase to phase and should be balanced with in 10% or less (a new motor may measure less than 5% variation). At about 10HP and up, you will measure less than 1 ohm of resistance phase to phase.

[@Froggability]

GalcoTV. You CAN megger phase to phase. Just lift 3 of the 6 tails and test away. But it's rare to bother with this procedure. Cos normally just megger the whole unit and it's either a pass or a fail.