How To Mod Gel Blaster Into BB Airsoft

[@Vevuzul]

Thanks it helps because airsoft rifle cost SO MUCH and gell blaster are super cheap compared to an airsoft, definitely a big help in an airsoft field

[@77soundwave77]

Thanks, been considering this due to my gels kept breaking apart in the mag gears way before shooting and clumps up. Checked the gears, smoothen anything sharp just in case, but it doesnt even matter. No matter what hardness gel i get they just break apart easily

[@tocixfx3555]

Just buy the right size BB,s , adjust the barrel slightly to fit the BB smoothly not fall out, and thats all, 6.9mm bb for 7mm barrel , 7mm BB for 7.1-2m barrel etc ,, Ebay 100 Nylon Bearings at your barrel size, forget the mods.. using a Golden eagle 5.1 with slight modified gel holder lips, Green Gas, Though IMO its not a toy when using BB,s

[@chivorn1581]

Where do you buy the right a bb ammo from?

[@tocixfx3555]

@@chivorn1581 enjoy and wear eye protection if they hit a hard surface they will rebound fast

[@pragma2017]

@@tocixfx3555 oh yes!!! Make sure you have tweezers handy to pick them out!!

[@pragma2017]

@@chivorn1581 eBay

[@hunterblood313]

@@chivorn1581 just buy at ali express type right size of bb plastic for example 7 mm bb plastic ball

[@damiensabastianmikhael2117]

6MM BARREL TIPS 1. Take a straw 2. Cut the straw from up to bottem just to fit in the 6mm bb 3. Insert 6mm bb until full into the straw 4. Tape the cutting line at the straw 5. Insert the straw into the barrel If it still loose, tape the outer straw so it fit in the barrel I hope you guys understand😅

[@Beb0_PR]

Well i bought an orbeez rifle and it happens to shoot bb’s as if it was the actuall orbeez all i actually used from the video was the mag idea so it loads up the bbs

[@NaokiYuusuke]

Glad it helped 😁

[@OnlinePez]

Just do what I did, buy 7mm BBS, no conversion necessary. Works perfect for gbb pistols. Very very accurate since all the bbs are the exact same size. Doesn't work as well for my aeg though as I have to tip the blaster forward in order for the BBS to load. Works well for gbb pistols because the mag uses a spring to push the BBS up.

[@classifiedagent8807]

Does 8mm ones work?

[@OnlinePez]

@@classifiedagent8807 I think they are a bit to big

[@ikecarlson04]

would a stock double bell g18 work with well with them?

[@JR-zw2vb]

There is no 7mm BB

[@OnlinePez]

@J R you are right, they are used for other things but can be used as BB's as well and they work much better than gels.

[@clutchkicker392ison5]

Good job mate, i looked into moding me M4a1 when it first came out. Lotsa ballz out there, stone,plastic, rubber, but the hard bit is sizing. BUT use a different barrel guts like in the vid an u should b sweet to run stock airsoft BBs . Like Naoki says 'its about sealing'. Have fun ppl. Thx man.

[@iqbalhakimi5866]

Did it really work? Have you tried it? I want to know the results.btw i also have m4a1 blaster and try to mod it to bb airsoft

[@clutchkicker392ison5]

@@iqbalhakimi5866i ended up ordering proper airsoft parts from NZ (Clip, T-Piece, inner barrel. and it all worked spot on .

[@goatedoce4208]

I also need to know lol

[@whiteghost1250]

first time tgk org malaysia mod hehehe disebabkan itu aku subscribe

[@NaokiYuusuke]

Hehe terima kasih...😝

[@storkfejot9845]

@@NaokiYuusuke springer bole ke mod jadikan semi

[@Norman2Galindez5]

​@@NaokiYuusuke nice bro i finally found a solution nice one bro, by the way bro can you try the 7mm airsoft bullet? one gel blaster?

[@joshuaafaustino]

Very well explained, good job

[@Rudy0284]

3:15 what about lube cos this might get stuck in long or heavy use 🙌🏻💯

[@cedrickbarrameda8338]

is it still possible to make it automatic even though the interior has been changed?

[@NaokiYuusuke]

Yes, it will work with automatic too, because we didn't change the mechanical parts but we only change the interior parts so it will definitely work

[@PabloAlmeida]

Man, great tutorial! Thank you a lot! I will do it next month but I have one question: How the BBs perform in terms of reach? The shots keep the same distance, or it is better / worse?

[@Immortal_Mentor]

Depends on your weights, BB's require much more hop up to remain accurate and travel further distances.

[@auroraretalidador2574]

It is possible to make a spring become a eletric, buddy? You could try?

[@NaokiYuusuke]

The internal parts is totally different, not sure it will fit with electric parts

[@kameryntuttle1340]

i liked subscribed and now im commenting

[@decoyrazer9418]

hey man.. what if we use ball bearing 7mm? similar size with the gel bullets.. is it gonna work?

[@NaokiYuusuke]

metal ball bearings might not work, because it's too heavy..if you use 7mm bb pellets that would work

[@mattivirta]

gun airblow not have power shoot metal bellet and 6mm bellet good power, need lot increase power first but this toy gun not can. better buy real bb gun and not waste time and work shit toy gun not working good

[@NaokiYuusuke]

@@mattivirta you got it man

[@NeeDaUsernamE-15]

Probably not unless the correct modifications are done

[@xydoestuff]

Do you have a 3d print file for the barrel?

[@christiancaloza4999]

btw bro where did you buy that gel blaster ?

[@NaokiYuusuke]

I bought it in Shopee, just search 'crystal gun' or 'gel gun'

[@dizhan.74]

why not using aluminium or copper barel?

[@NaokiYuusuke]

Just to get a good precision for my precision BBs

[@dizhan.74]

@@NaokiYuusuke i see, then will you get an aluminium/copper inner barel for better accuracy in the future?

[@07_elijah]

If your gel blaster uses 7mm gel bullets can’t you just buy 7mm bbs ??

[@NaokiYuusuke]

The bigger the bb size, the heavier it becomes and hence reducing the speed of bullet.

[@BotConnorrr]

Bought myself a Jund AK47 Gel blaster a couple of months back. Do you think it's worth trying to convert it?

[@NaokiYuusuke]

Yes, its worth it

[@yogamf4477]

Kalau barrel nye barrel biasa boleh ke,sebab saya tak 3d printer,saye pakai unit awm jy boleh ke

[@NaokiYuusuke]

owhh, boleh je as long as dia fit and xde air leak boleh proceed

[@nocontent52yearsago11]

Does it have full auto function?

[@NaokiYuusuke]

Yes it have full auto function, but not for mine because this toy got two same models with auto or manual

[@neerbie6858]

What happens when you only mod the magazine

[@NaokiYuusuke]

the BBs will fall from the barrel once you reload

[@shinobi_naze8455]

Couldn’t you just get 7mm bb pellets?? Or u still have to change parts??

[@NaokiYuusuke]

I still need to change parts if I want to use 7mm pellets because the barrel size is around 7.2-7.5mm

[@shinobi_naze8455]

@@NaokiYuusuke ok just so I understand. If the bb’s are 7mm I still need a bigger barrel correct so a 7.2 7.5 mm barrel. Because the 7mm bb won’t fit through a 7mm gel barrel?

[@NaokiYuusuke]

@@shinobi_naze8455 No, I mean the barrel size by default is 7.2-7.5mm...So, I need to change a barrel that is accurately at a size of 7mm for 7mm pellets...

[@shinobi_naze8455]

@@NaokiYuusuke oh ok now I understaNd thank you

[@NaokiYuusuke]

you're welcome

[@botalpha9468]

Can u also just put a airsoft mag in it

[@NaokiYuusuke]

not sure about that, normally different manufacturer have different mag slot

[@devidpoticar8623]

So as long as the hole of mag is directly align with t-piece receiver.

[@otteryt2737]

did it can full auto , burst and single shoot ?? ,

[@NaokiYuusuke]

this model that I have is manual mode only. There are another same model with auto/semi and manual in the market.

[@otteryt2737]

@@NaokiYuusuke so that mean it working with my belig m16 gen 8 ??

[@NaokiYuusuke]

@@otteryt2737 yes it can 😁

[@rohitmungroo]

Quick question can I use gels in a dmps full auto sbr co2-powered bb air rifle with dual action capability (on Amazon)

[@NaokiYuusuke]

yes you can..make sure to reduce gel soaking time in order to set the gel at the right size for your barrel..once you get the right size, ready to shoot and splatter like paintball 😎

[@rohitmungroo]

@@NaokiYuusuke thank u so much

[@NaokiYuusuke]

@@rohitmungroo you're welcome 😉

[@devidpoticar8623]

It works, for as long as the size is right but be careful tho co2 power might destroys your gels before getting out of barrel.

[@adamraden2067]

Hello sir, can i have the template of the inner barrel so that i can 3d print it. Plzzzzz

[@NaokiYuusuke]

sure!! gimme your email, I'll email it to you

[@NaokiYuusuke]

@zizou Lamiri Yes you can. P90 is more easy, you just need to mod your magazine by making sure that the hole where the bullet fall into the rifle have the size of 6.5mm radius. The rest is just the same as in the video, you need to change your barrel.

[@NaokiYuusuke]

@zizou Lamiri sorry I just noticed your comment in my notification..yes you can do that but I think you should try load your bb in your magazine and see if the BBs load properly without getting stuck, if it works normal then you just need to change the barrel only.

[@NaokiYuusuke]

@zizou Lamiri 1. As far as I know, max size for gel ball is around 8.5mm. 2. To know what size you need for the ammo, just use 'internal caliper' to measure the inside diameter of your barrel. To get the perfect size of gel ball, I recommend you record your gel ball soaking time, try soaking for an hour and check if the gel fits perfect or not, if not, soak for another 15 minutes and check again the size until you see the gel ball fits perfectly in the barrel.

[@NaokiYuusuke]

@zizou Lamiri if it's new out of the box but the battery is from 2019, I think it is still good because it's never been used..the battery life will only degrade if it has been used many times...

[@masterofiv2882]

Awesome Frame. It's probably that I'm older but I prefer more realistic coloring than the bright toy schemes some if not most guns have.

[@NaokiYuusuke]

They also have realistic colors available but a bit expensive.. Normally a well known brand if I'm not mistaken was Jin Ming brand, good quality and realistic color

[@unreliablekid4172]

@@NaokiYuusuke I hate camos on guns

[@JR-zw2vb]

It's prohibit in the U.S. Toy must have a yellow or orange tip by law. Else you will be considered carrying a weapon (in public).

[@colvinau1403]

So all you need is a light bb then your fine I have a m4A1 gel blaster would it work with that ? Thanks for the video anyway

[@NaokiYuusuke]

yes it will work flawlessly with lighter BB..just make sure you have the correct BB size

[@colvinau1403]

@@NaokiYuusuke what’s the correct bb size and does it hurt more with bbs

[@NaokiYuusuke]

@@colvinau1403 I suggest you better mod the barrel to 6mm internal diameter, so that you can shoot 6mm bb pellets.. default barrel size is around 7.8mm, I guess there are no BB at that size though.. Yes it hurts 😂, I shot my hand

[@colvinau1403]

@@NaokiYuusuke ok thanks

[@colvinau1403]

@@NaokiYuusuke and do I have to mod the m4A1 barrel to shoot bb because they will still work with a 7.8 mm barrel so why no just keep it as tbat

[@unreliablekid4172]

So if i were to buy a 6.1mm tube that is longer wouldnit increase range?

[@NaokiYuusuke]

You can watch this video long barrel vs short barrel airsoft test kzbin.info/www/bejne/pnnCeXuPr658aMU ... I already tried with long barrel but it decreased my fps and range, depends on your plunger size, length of barrel will also affect the velocity of BBs..I don't know how to explain it in scientific terms, but you can watch that video of him doing the testing

[@alhadidmuhammad2750]

can it doin full auto? cuz u just try spring mode, pls answer

[@DFiantFigure]

Wait couldn’t you just get 7mm airsoft bbs

[@NaokiYuusuke]

I'm not sure if there are 7mm bbs in the market

[@DFiantFigure]

@@NaokiYuusuke I just googled it. I’ll buy them an test them an let you know 🫡 if not, I’ll hit you up for a barrel 😂

[@NaokiYuusuke]

@@DFiantFigure aight 😂

[@ryan_airsoft]

where can i get a 6 mm barel i dont have a 3d printer

[@NaokiYuusuke]

You can find one at AliExpress or Amazon, just search 6mm stainless steel tube.. make sure that 6mm is the Inside Diameter, check the product description properly

[@profesorplazas]

Nice job, bro ! Airsoft is life ! From Venezuela :)

[@dcollector8172]

How much is the fps rating?

[@NaokiYuusuke]

120fps only

[@haechin13f3]

What if you use 8mm ball bearing as bullet? Can it change anything. Cuz i have same rifle as you have(but mine can shoot full auto)

[@NaokiYuusuke]

8mm ball bearings might be a little too heavy, I bet it won't go far though.. because I already tried shooting 6mm ball bearings and the pressure build up is not enough..

[@haechin13f3]

Ok thanks for replied

[@haechin13f3]

Cuz i want my rifle to be pack a punch to people.(anti personal rifle)

[@NaokiYuusuke]

Hahahaha, perhaps maybe you should consider making alcohol gun which is really powerful, you can even shoot marbles😂

[@haechin13f3]

After i testing with 8mm ball bearing as BBs, i will tell you the result. Currently that thing still in OTW

[@christiancaloza4999]

its that an battery operated?

[@NaokiYuusuke]

The one in the video is not a battery operated gel blaster. It’s just a manually operated. But this trick works fine with battery operated gel blaster too.

[@jescatubay8763]

So, pellet bullet available for that?

[@NaokiYuusuke]

yes, can buy from shopee..just search 6mm pellet / 6mm airsoft

[@jescatubay8763]

@@NaokiYuusuke ok ty

[@janssencheah8073]

hi have you tried 7mm bb's & without any modifications to the unit? will work?

[@devidpoticar8623]

Hypothetically it works, but the standard barrel is 7.5mm so there are plenty of energy loss hence weaker fps and inaccurate shots.

[@sabariahmamat7793]

Mntp bang , bahasa inggeris pekat ,, abg dpt 7sub dri saya dan kwn saya 😊

[@NaokiYuusuke]

terima kasih😳

[@sabariahmamat7793]

@@NaokiYuusuke hehehe

[@mynameismrmeow]

7.1 mm?

[@josephmokbel1917]

What gun is that

[@NaokiYuusuke]

m4a1 manual reload

[@devidpoticar8623]

Just buy a 6mm tube in your local hardware or online there are plenty of them.

[@iamnabha9468]

What rifle is that?

[@NaokiYuusuke]

M4A1

[@iamnabha9468]

@@NaokiYuusuke i meant, which toy is that

[@suhartojerickandal7217]

Thank you I hope I will be success in my project

[@kingm7md303]

Couldn't you have just used 7mm pellets?? Good vid btw 👌

[@NaokiYuusuke]

in my country it's hard to find 7mm pellets..standard size that I can find is only 6mm😅

[@kingm7md303]

@@NaokiYuusuke oh that's that's why, I used to have the same problem but then I decided to just order the 7mm pellets from the US

[@darwiishanafi970]

@@NaokiYuusuke if i have bullet 7mm, can i just use 7mm for the blaster n don't need to change anything?

[@NaokiYuusuke]

@@darwiishanafi970 yes you can do that too..but make sure the 7mm bullet weight doesn't exceed 0.15g

[@classifiedagent8807]

@@NaokiYuusuke does 8mm ones work?

[@skubajj6724]

can u link where u bought this ?

[@NaokiYuusuke]

do you use shopee in your country? If yes, I may drop a link here😁

[@delonted]

@@NaokiYuusuke drop a link

[@NaokiYuusuke]

@@delonted shopee.com.my/product/40407484/6967860498?smtt=0.20961412-1629126429.9. or you can search in AliExpress "Gel Blaster"

[@generalgreen77]

Do you still have bb mag feed issues, as the bbs still get stuck!

[@NaokiYuusuke]

I guess your mag feed doesn't have enough tape thickness..mine work fine until now🤔

[@generalgreen77]

@@NaokiYuusuke sorry for comment b4, was trying hours to get my mag to feed with no luck. Was very frustrating… the solid tape did not work, I got mine to finally work using thin metal, like a soft spring door… ty for your help 👍🏽

[@NaokiYuusuke]

glad you've come up with that idea..I used a superglue to hardened the tape, maybe I forgot to mention it in the video..

[@hoaiucnguyen4462]

Please give me the link to buy parts

[@mobilelegend6380]

Where can i get 6mm barrel ?

[@devidpoticar8623]

Local hardware 6mm brass tube

[@elitium-e4e]

do this with a aeg gel blaster that shoots around 200 fps

[@AlexMartinez-pf7ro]

Can you share the file for the 3d printed barrel?

[@NaokiYuusuke]

email me and I will send the file to you. :D

[@vickramishim]

Hey can i use gels in an aeg airsoft gun

[@NaokiYuusuke]

yes you can, but you need to make sure reducing the gel soaking time to get the exact size for your barrel

[@vickramishim]

@@NaokiYuusuke ok thank u u were the last persons vid i commented on and first to reply

[@vickramishim]

@@NaokiYuusuke can i use it in a co2 gun

[@NaokiYuusuke]

yes you can, it would be awesome like paintball gun..hit and splatter 😎

[@fillantaufan4058]

Quick question, can u load a fully auto gel gun with the same size plastic bb? Ex: 6mm gel ball loaded with 6mm plastic bb

[@NaokiYuusuke]

yes you can 😊

[@christiancaloza4999]

@Lachlan Sims where to buy the 7mm bbs?

[@notsbil.15l98]

Boss nak tukar airsoft ke gel blaster macam mana pulak

[@NaokiYuusuke]

kalau nk tukar dari airsoft ke gel blaster xperlu mod apa2 dah..rendam je gel ball tu sampai dia sama saiz dgn airsoft punya peluru and boleh terus tembak mcm biasa..(tips: rendam beberapa biji gel ball pastu rekodkan masa dia membesar sampai saiz peluru airsoft berapa minit, dh dpt masa rendaman, baru rendam semua gel ball based on masa yg direkod tadi)

[@notsbil.15l98]

@@NaokiYuusuke tq boss

[@eddiemoore2582]

Do it work with the srb 400?

[@NaokiYuusuke]

yes, it will work as long as you mod it to meet the size of 6mm bb

[@JR-zw2vb]

wow amazing!

[@exexoexilegaming1944]

nice dude Im gonna buy M416 soon..but im not gonna change it bullet, im gonna modify it firepower...did you know how can i modify it as soon as my blaster arrive

[@NaokiYuusuke]

you can watch this mod to increase firepower without changing it's original spring😁. kzbin.info/www/bejne/oILLi6yeeryfj8k

[@redissus8065]

Btw i want to buy a new mag so if i want to shoot gels i have the old keep it but i dont want to keep changing mag

[@NaokiYuusuke]

the best thing about this is you can shoot gel ball at the size of 6mm the same as bb, just soak the gel ball untill it reach the same size as your original bb, so that your new mag can be used without having the need to modify the mag

[@redissus8065]

@@NaokiYuusuke ok

[@izzulalif6088]

the actual size for mag is 7 or 8 mm?

[@NaokiYuusuke]

7 I guess

[@izzulalif6088]

@@NaokiYuusuke okay thanks

[@zulfarhanmerican6872]

Boss Mana nak Cari gel blaster / airsoft Kat Malaysia?

[@NaokiYuusuke]

dkt shopee, cari "crystal bullet"..nnti scroll ada nampak gel blaster

[@malachyhammond8515]

Does it still hurt the bbs on this video

[@NaokiYuusuke]

Yes, really hurt

[@ChunyanLyu]

I have a gel blaster that uses 6mm gel bullets and has no mag all I did was put airsoft bbs in

[@NaokiYuusuke]

That's cool, much easier and no need to mod

[@RichLclips]

What about this but reversed? Like can i order a bolt action airsoft rifle and convert barrel to fit gel balls? Havnt seen anyone Do that

[@NaokiYuusuke]

yes you can, the airsoft rifle is more powerful in terms of firepower, it is suitable to be used to shoot gel ball, but there's a way for not modding your airsoft rifle at all, just soak the gel ball just enough size to fit with your barrel and you're good to go.

[@RichLclips]

@@NaokiYuusuke ahh ok good point. Instead of modifying barrel and magazine. Thanks for response

[@malachyhammond8515]

So that means you’ve mod your gel blaster gun And called it an airsoft gun

[@NaokiYuusuke]

yes sir 😆

[@malachyhammond8515]

@@NaokiYuusuke why didn’t the bottle fall Off

[@syauqiazmi4222]

what size for the gel if i dont want to mod the megazine

[@NaokiYuusuke]

7mm

[@mindassassinatetv5242]

Why not just buy 7mm bb??? No need to modify stuff

[@NaokiYuusuke]

because the original barrel is not accurately 7mm, plus minus tolerance about 2mm..if the barrel is too loose, the bb won't shoot far enough because of the leaking gap

[@jkj9404]

Now how to do it with full auto one...

[@DarthJarJar6]

Getting an ak gel blaster for this. I aint spending 300$ on an airsoft gun when i can do it for 100$

[@duckmintNZ]

The feet per second will make the difference. A hell blaster is like 50-100fps. Actual airsoft guns are 350-500fps

[@qayyum6864]

​@@duckmintNZa decent gel blaster can do 200fps and can go high 300 if upgraded

[@zamSEG]

berapa rege senapang tu bos? buleh share link mana nak beli?

[@NaokiYuusuke]

RM36 beli dkt shopee.. shopee.com.my/product/61842010/11912347443?smtt=0.20961412-1626155859.9

[@zamSEG]

@@NaokiYuusuke tqvm bos sudi share link dia. byk giler versi mainan nih. rambang mata survey. hahaha. sori sgt menyusahkan bos & buang masa bos.

[@NaokiYuusuke]

Haahhaa mmg saya pon rambang mata tgok shopee tu, mcm2 model ada..nak2 yg model SCAR yg boleh lipat arm rest tu.. it's okay bos😁

[@zamSEG]

@@NaokiYuusuke tau xpe bos. musim pkp ni, ni la projek yg buleh buat pun. main dgn anak². hehehe. serius mmg rambang mata. x tau plak byk jual kat shopee.

[@alifajmi9699]

can you sell the modded gun?

[@nzo_6543]

Don't is so small

[@christiancaloza4999]

does this modification work it full auto mode?

[@NaokiYuusuke]

yes it works with full auto too

[@christiancaloza4999]

@@NaokiYuusukeaight tanks man this realy helps me

[@plaguedoctor8616]

i have a desert eagle version that takes only 6mm orbeez

[@NaokiYuusuke]

woww that's perfect!!

[@plaguedoctor8616]

@@NaokiYuusuke yes i will have to try out using the bbs one day

[@mohasjebatking9028]

nice one bro..keep sharing please

[@husseinlafta8982]

Can I put a 6mm bb in a 7 mm gell ball blaster?

[@NaokiYuusuke]

Yes you can but the 6mm bb will slide out easily from the barrel.

[@wazgaming4278]

nice bro, tapi rifle ni mmg semi auto eh?

[@NaokiYuusuke]

dia ada dua version dkt market..kalau version auto dia tambah rm20-rm30 mcmtu..kalau versi manual ni murah jaa..saja angkat manual sbb nk feel tarik dia punya reload tu😂

[@hydrospheric7949]

Hello if possible can you made this mod but with runqi brand p90 gel blaster

[@ionbunk5079]

Epic, thank you

[@NaokiYuusuke]

You're welcome 😊

[@David-ij2hs]

very good nice vidro

[@rickywaworga4119]

Nice video. Thank you so much🙏

[@NaokiYuusuke]

you're welcome

[@rickywaworga4119]

@@NaokiYuusuke how's the size of that gel blaster? Is that real scale or kids version?

[@NaokiYuusuke]

@@rickywaworga4119 the scale is not like actual 1:1 size. And this gel blaster stock cannot be adjusted.

[@rickywaworga4119]

@@NaokiYuusuke thank you bro🙏

[@muhammadzamir8691]

Bang boleh pakai peluru Yang plastic Tu ke??

[@NaokiYuusuke]

lepas dh mod mcm dalam video tu dh boleh guna peluru plastic..😁

[@aboodkhalid8735]

What is the barrel size for this gun

[@NaokiYuusuke]

by default it is 7.5mm barrel

[@aboodkhalid8735]

@@NaokiYuusuke so I can buy a steel ball 7.5 mm will it work

[@NaokiYuusuke]

I guess steel ball is too heavy to shoot

[@jamiefreedom8320]

@@aboodkhalid8735 only gas powered will work

[@XNiFo]

@@aboodkhalid8735 ضبطت معك؟

[@TheChaoslusterhall]

very cool

[@andrievbastichy8551]

heh.. if me or my friends could afford a 3d printer.. we would just go buy an airsoft gun.

[@dylanmonstrum1538]

So theoreticly, you could just do nothing to a gel blaster, but upgrad then size of the BB? Example, instead of a gel blaster that shoots 7-8mm gel balls, I could buy 7-8mm BB's and be fine? SOmething seems... not right about that.

[@NaokiYuusuke]

you can just buy 7mm/8mm BB but the spring inside is too weak to shoot a BB weights more than 0.15gram..I have tried shooting a 6mm BB weighting at 0.23grams and the bullet fps has reduced a lot..0.15grams BB is the best and powerful fps for this rifle..If you can get 7mm-8mm weighting at 0.15grams it shouldn't be any problem to shoot it😁

[@dylanmonstrum1538]

@@NaokiYuusuke Wow, this is all so interesting! Thanks so much for the video and information!

[@tocixfx3555]

yes , it is very easy with 1 slight mod to standard barrel, just make sure it exits the barrel , try ebay and plastic bearings 6.94mm thru to 7.1mm for barrel sizing {7mm barrel i use 6.9mm } , It wont be a toy anymore but a personal safety device imo

[@xLaMelo_]

How about 7mm steal bullets ? Anyone ?

[@NaokiYuusuke]

I have tested it with steel BBs, it's not powerful enough to shoot it

[@soupricemf1260]

Klau yg ada auto dgn semi paling murah jumpa RM100

[@NaokiYuusuke]

ha'ah dia kalau dual mode punya biasa mahal sikit sbb gearbox dia tu yg mahal..

[@loli_teler]

Malaysia airsoft ilegal kah bang?

[@aimanxgaming4055]

Bang bahasa Malaysia ade tak , Sya tak faham

[@NaokiYuusuke]

huhu alamak ada jugak request bahasa melayu..Dia mcm ni, ada dua benda yg kena mod..satu part yg barrel atau tube keluar peluru tu kena 3d print atau cari tube/barrel yg sesuai dgn saiz peluru yg kita guna..part yg kedua kena mod ialah magazine/tempat isi peluru tu kena letak tape dkt tempat yg abang tunjuk dalam video tu sbb nk elakkan peluru tersekat dkt situ..

[@dxiash83]

Just buy 7mm bb.case closed

[@NaokiYuusuke]

Not as easy as you might think. 7mm BB means heavier bullet, I don't think it will shoot far because I've tested a heavier 6mm bb and the result will reduce the speed of the bullet

[@akmalhakim272]

can you make one for me I'm willing to buy it

[@AriiqAlfian-vn2wh]

I found the same model

[@fr0st1yduh]

I dont have a 3d printer 😢🥺👉👈

[@NaokiYuusuke]

You can buy a 6mm aluminium barrel online

[@muizismail4844]

Bro dari malaysia kan?

[@NaokiYuusuke]

yupp betul tu

[@muizismail4844]

@@NaokiYuusuke terbaik, memang cari orang kita yang explain pasal gel ke bb ni🤗.

[@NaokiYuusuke]

hehe, thanks support😊

[@josephcervantes6872]

Nice

[@mrxanimation330]

I want to do this but i have a p90 not a m4

[@NaokiYuusuke]

think of a way, you should be able to do it too..perhaps you could study the mechanism first before figuring out how to mod it. 😊

[@mattivirta]

who idiot buy toy gun if can buy real good bb gun

[@7r3xy96]

@@mattivirta wow, easy genius. i know you got lots of money, but some people dont. Let them have their own fun.

[@Lightrix.]

its nonsence) any base airsoft aeg will be better. hop-up system, good barrel, better gearbox)

[@JoshyoPC]

You realise this is against the law?

[@NaokiYuusuke]

Not in my country though 😎

[@giraffeeggs8387]

@@NaokiYuusuke lol

[@Cherry-zg7el]

@@NaokiYuusuke Aren't you Malaysian? Gel blasters are actually illegal in Malaysia because they imitate guns.

[@mindassassinatetv5242]

@@Cherry-zg7el really…I thought only airsoft are illegal.

[@shahrulnizam4713]

@@Cherry-zg7el stop prevent people to have fun

[@mattivirta]

worst gun hahahaha, not can shooting hole at bottle shit. no power

[@NaokiYuusuke]

stay safe

[@unreliablekid4172]

You can't even spell.