Best warranty in the biz...Until it hits D.Walkers work bench where a piece of paper is exchanged for more power!💪
@batmantiss9 ай бұрын
I used to roll my eyes at heated handles until I worked line clearance in the north dakota winter...
@justincolpitts_ua7169 ай бұрын
Stihl Looking forward to the 090 rebuild 😁
@jamesminard18679 ай бұрын
I like my Echo power saws I have a cs-550 , cs-590 and cs- 620 Use them 6 days a week at my sawmill operation
@z1berzerker9 ай бұрын
Like 👍 the old school 🏫 info on the Echo brand
@Super-Dave-Outdoors9 ай бұрын
CST-610EVL is the twin cylinder i believe. I think rocky mountain chainsaw has one with dual expansion pipes, sounds wild in the videos.
@clarencetrice44429 ай бұрын
HI DONNY 😊😊 theres a school.trick I learned years ago about keeping your hands warm U put a pair of cotton gloves 🧤 😊 on then put a pair rubber gloves on 2 that will keep your hands warm 😊😊 on old school chainsaws U take the sparkplug out and dry it off put your finger over the sparkplug whole and put the sparkplug back.hook the sparkplug wire try again also the switch has 2 be on 😊😊 OMG 12 13 2O23
@thebradleysoncatbirdhill68499 ай бұрын
Donny.... I absolutely love my stock. 7310. I think you just cannot beat that value. Give the Fozz 🐕 a tussle on the head for me!
@ToddAdams12349 ай бұрын
CS: Chain Saw P: Professional W: Wrap EXACTLY, because I asked my local Echo dealer about it and then I found out.
@ronsilva5169 ай бұрын
That is very interesting info on the eco 👍👍👍
@cgriebel19 ай бұрын
Great info Mr Walker. The new Echo's are definitely a quality product. I bought a 4910 for my son in law and after a quick tank of fuel, we threw on a GearHead exhaust deflector and shaved the limiters for a re-tune. That thing feels awesome. We've got eight saws total (a bit of everything), and the 4910 feels as if they put a lot of R&D time into these. The 7310/4910 both appear to be high-value/price saws for sure. I'm wondering why they wouldn't just have brought over the SX versions of these two and just called it a day (?).
@saltrock96429 ай бұрын
Fun show, buddy. My paw in-law has run Echo saws for many years and has a few in his shop I’m going to talk him out of. Through you, I’ve kinda learned what to look for when checking out an older saw.
@timg94489 ай бұрын
Good job DW. Good info
@johnclarke81809 ай бұрын
Awesome job Donny, thank you for educating us! I appreciate it!
@colinmurray91129 ай бұрын
Thanks for info on the echo I know it's not a chainsaw but I have and still use an echo hedge trimmer fairly old HC 200 AE serial number 00000333 with kioritz corp on plate and walbro carb wa91a thanks for videos
@Macgyver-ranch9 ай бұрын
Love the info Donnie. Can't wait for the dynamic timing demo. I have always wondered if there is a method for static timing of E ignition like we did on points systems in the olden days. Maybe you can explain dwell as well.
@jakefrye-13769 ай бұрын
Awesome history ! Just bought a 501p and I am really impressed with it !
@donnywalker46919 ай бұрын
They are great keep er in the wood 🪵🪵👍
@ToddAdams12349 ай бұрын
I REALLY like mine. Here’s a strange thing that I’ve NEVER ran into on any of the other saws that I’ve got: it’s definitely NOT stingy on bar oil. It puts out so much that I had to turn MINE all the way DOWN to minimum or it runs out BEFORE I run out of fuel! I tried everything that I could think of, but it still gets more than enough lube to the b/c on min, so I’m happy enough. 372XP I run on max oil. CS550P I run on max oil. 365XT I run on max. 501P, gotta run on min. 😮 Oh well, just goes to show that those machines are “similar” to people: they are NOT all the same, just close !
@jakefrye-13769 ай бұрын
@@ToddAdams1234 I’ve noticed the same thing on mine , immediately turned all the way up before even starting saw for first time , got saw running grabbed some cardboard to make sure decent oil out on end of bar and wow it was a mess , turned all the way down as well. I’m only running a 16” bar on it so that could be part of it, 🤷🏻♂️ too much is better than not enough. I did a poor man’s muffler mod and seemed to like it , hauled them stupid screw stops out. I did notice it’s eating some fines though , leaves abit to be desired for air filter quality imo
@bbarker57669 ай бұрын
I've got the CS-590 and really liking it for what little I've got to run it. I would've ran more but a busted up knee kept me out if commission for a good bit. I've been looking at the 7310 and really like what I've heard from the videos that I've seen. Loved this vid too! Thank you for doing these!!
@alanwatts92329 ай бұрын
Hi Donny, I have my late dad's Mobilco Echo CS60S, s/no 0051201, I would say bought late 60's or early 70's, I'm guessing not run for 20 years until 6 months ago I had a go at it, it ran but 4 stroked constantly, probably needs a carb kit, I just wanted to see if it still goes. I likely won't use it, a bit heavy for the cc's, very solid unit, I don't want to wreck it.
@Monasheemonster9 ай бұрын
Your timing was great Donny, just mounted my cannon adapter and wcs dogs today and was scratching my head about the adapter not having a retaining screw
@batmantiss9 ай бұрын
I beat the ever loving dog snot out of my 590. For YEARS now. (I own a small tree service). It starts and runs like a champ! Same with my 355t's
@ToddAdams12349 ай бұрын
And NOW Kiortz has morphed into the Yamabiko Corporation.
@garyhenion94599 ай бұрын
Great discussion Thank you Donny
@thetwostrokerebuilder9 ай бұрын
It's the Honda of chainsaws 🏁
@zeromark2028 ай бұрын
Thanks for the video
@canuck72689 ай бұрын
Hey donny are you gonna be doing saws over the Christmas break? I just got the call last week my name is up on the list to get the whole works on my echo 620pw. I'm not sure if it will make it all the way out there before the 23rd. I'm excited to see what you can do with it.
@ronsilva5169 ай бұрын
Just member the foz is the man !😂😂
@dustincombs4975 ай бұрын
Send one down my way in West by golly Virginia
@230e49 ай бұрын
Heated handles and carb Echo 👍
@longbar185d29 ай бұрын
Thanks buddy!
@jonathanhensley86859 ай бұрын
Nice
@jackofalltrades559 ай бұрын
A month or two back, I think you mentioned you had one of the new Echo 4010 homeowner saws in that you were going to do some work to. I'm curious if you have any thoughts on it and how did it turn out?
@ToddAdams12349 ай бұрын
Donny, why don’t you just take more off of the base when you machine, that way you could still run a gasket instead? I’m really curious and would like to know.
@donnywalker46919 ай бұрын
Well if you take to much off base then you got to watch clearance around cylinder mounting such as flywheel and other things it’s just what I like to do and it works for me
@nealhamilton38816 ай бұрын
If you were looking for a farm saw and a saw to process lots of firewood, oak, pecan, birch etc, every year would you choose a husky 572 or the 7310 when it comes to reliability first and power second?
@crperformancetucker50659 ай бұрын
I think Echo is a very easy starting saw. In comparison to other models
@AA-sk2yi9 ай бұрын
😎😎😎👍👍👍
@gordsmith77089 ай бұрын
Hi Donny 👋
@adamevans48249 ай бұрын
What’s the tool part number for the limiter caps
@ToddAdams12349 ай бұрын
I’ve got a question that I’d like to have input from ANYONE. Instead of advancing the ignition timing, why don’t we just run a lower octane (but STILL non-ethanol) fuel? I’d like to think that it’s a non machining quick fix AND it’d be less expensive. I CAN get 87oct non-eth locally, but I know that it’s likely not available everywhere.