How to Monitor Air Quality | Air Quality Monitoring System | ESP8266 | Blynk IOT Projects

  Рет қаралды 101,117

Tech Trends Shameer

Tech Trends Shameer

Күн бұрын

Пікірлер: 333
@adjanerossana7812
@adjanerossana7812 19 күн бұрын
Project successfully completed!🎉 Thanks for the support, it worked perfectly Sir
@TechTrendsShameer
@TechTrendsShameer 19 күн бұрын
Great 👍. Thank you.
@idk0075
@idk0075 Ай бұрын
sir i have a doubt, the gnd of esp is connected to the +ve rail whereas gnd of dht11 is conn to -ve rail, from what i have heard that gnd should always be connected to the -ve rail of the breadboard and vcc/vu to +ve rail so sir can please clarify on the circuit diagram in this video
@carlangelolorete2912
@carlangelolorete2912 6 ай бұрын
Can I use this as our Computer Science thesis? Is there CS Theory and Algorithm applied in this project? Need advise
@TechTrendsShameer
@TechTrendsShameer 6 ай бұрын
You can.
@amnanafeesaabdulrahman7886
@amnanafeesaabdulrahman7886 5 ай бұрын
Hi can you tech me how you do this
@mamitamishra8571
@mamitamishra8571 Жыл бұрын
Can we use a medium size breadboard to do this
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Yes.
@rameshbhajanthri4242
@rameshbhajanthri4242 6 сағат бұрын
Sir i am not able to upload the program in the nodemcu board and there are errors in the program
@hassam01
@hassam01 6 ай бұрын
i 'm using 2 different mq135 but readings are 750+ on both sensors (room and outdoor same results) whats the problem?
@TechTrendsShameer
@TechTrendsShameer 6 ай бұрын
Do Calibration
@aswindr3640
@aswindr3640 Жыл бұрын
Can this done as final year project for mechanical engineering students?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Please check the project title with your faculties and get approval before starting the project.
@human464
@human464 6 ай бұрын
Iot are for cse IT students
@q2l867
@q2l867 Жыл бұрын
can this be done as final year project for IT student? what AI features or machine learning can I add to it to automate it more
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Yes you can do. I haven't tried AI.
@beingenter10er84
@beingenter10er84 10 ай бұрын
Sir please tell where did you write the code, how to upload the code to ESP8266 board
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
To write code I am using Arduino IDE. Check this video for NodeMCU setup kzbin.info/www/bejne/f4m2q4Smm9VjpJY
@beingenter10er84
@beingenter10er84 10 ай бұрын
@@TechTrendsShameer Thankyou sir for your response, but even after trying multiple libraries for LiquidCrystal_I2C showing "compilation error no such file or directory is found" sir, Please tell what should I do
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
May I know how you installed the library?
@beingenter10er84
@beingenter10er84 10 ай бұрын
@@TechTrendsShameer Sir after trying your zipped file for LiquidCrysta, it worked But now same problem is arising for (HID) but unlike other libraries I used there is not any proper library in Aurdino IDE as HID. And even after trying a zip file from aurdino website, error is same Sir please tell me what should I do
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
What is HID ?
@shubhangigavhale654
@shubhangigavhale654 7 ай бұрын
Sir can I use I2C module instead of I2C converter & MQ2 sensor instead of MQ135 please reply sir
@riemakoe
@riemakoe 4 күн бұрын
Can this detech odors also?
@TechTrendsShameer
@TechTrendsShameer 4 күн бұрын
No.
@themagniranthine
@themagniranthine Ай бұрын
Are you using male to female wires?
@TechTrendsShameer
@TechTrendsShameer Ай бұрын
Yes. Male to Female (For Breadboard to Sensor Connection) and Female to Female (For I2C to Sensor Connection)
@themagniranthine
@themagniranthine Ай бұрын
​@@TechTrendsShameer By the way I tried to make the circuit diagram in Fritzing but I didn't find the library for MQ135, do you think you can help me with that?
@abdullahgamer7856
@abdullahgamer7856 7 ай бұрын
Can we also use dht 22 sensor instead of dht11
@TechTrendsShameer
@TechTrendsShameer 6 ай бұрын
Yes. two lines of code change will be there.
@mihitamadhusmitasahoo4788
@mihitamadhusmitasahoo4788 Жыл бұрын
After assembling all the components mentioned in description ESP8266 in not getting displayed in arduino Can you please help to finish this project
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
please message me in Instagram.
@arunkumarmanokaran7983
@arunkumarmanokaran7983 9 ай бұрын
mam are you sucessfully completed the project ?
@virendra7178
@virendra7178 6 ай бұрын
How the board is getting powered?it is not shown in video
@TechTrendsShameer
@TechTrendsShameer 6 ай бұрын
Connect to laptop or power banker
@iockle6777
@iockle6777 Жыл бұрын
I2C CONVERTER link to buy its not in the description
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
www.electronicscomp.com/i2c-module-16x2-lcd-india
@YashKatkamwar-fx8iq
@YashKatkamwar-fx8iq Жыл бұрын
Exactly which I2C converter we should needed
@prajaktaardekar612
@prajaktaardekar612 Ай бұрын
Sir can you please tell us how to configure arduino for this project, i.e how to get NodeMCU 1.0 board to select ESP8266 Boards (3.0.2)??
@TechTrendsShameer
@TechTrendsShameer Ай бұрын
Please check this video kzbin.info/www/bejne/f4m2q4Smm9VjpJY
@prajaktaardekar612
@prajaktaardekar612 Ай бұрын
@@TechTrendsShameer Thank you so much sir!
@novogames
@novogames 7 ай бұрын
Can you pls explain how to connect the lcd display to this project ?
@sholawatmilenial4335
@sholawatmilenial4335 9 ай бұрын
Why do I practice using your coding? My LCD won't display writing according to the coding? Please help
@TechTrendsShameer
@TechTrendsShameer 9 ай бұрын
Adjust the potentiometer.
@sholawatmilenial4335
@sholawatmilenial4335 9 ай бұрын
@@TechTrendsShameer Yes, but only the boxes appear and the writing doesn't appear
@TechTrendsShameer
@TechTrendsShameer 9 ай бұрын
Use this library and try. github.com/Tech-Trends-Shameer/Libraries/tree/main/LiquidCrystal-I2C
@johnarbynavalta5634
@johnarbynavalta5634 8 ай бұрын
Does this send you notification quickly, when it detects bad air quality? Please answer🙏🏻 thank you!
@trisha5397
@trisha5397 6 ай бұрын
is it okay if the lcd is with 12c at the back?
@TechTrendsShameer
@TechTrendsShameer 6 ай бұрын
It's completely ok. You can also use in that way.
@nilamanipritishchandbehera5216
@nilamanipritishchandbehera5216 8 күн бұрын
Bro how to connect the model to computer and where we have to paste the authentication token and template id
@TechTrendsShameer
@TechTrendsShameer 8 күн бұрын
Please watch the full video. Connect the board to the laptop using cable
@shivampandey-vc4xn
@shivampandey-vc4xn 11 ай бұрын
can we use ESP 32 in place of ESP8266
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Yes. Check this video. kzbin.info/www/bejne/o6fHoXSbd7t8e8k
@vlladimirarositadomingoaga7831
@vlladimirarositadomingoaga7831 Ай бұрын
How to connect solr charger connector, solid copper wire, solar panel and powerbank? For air quality monitoring system.
@maristelakrystalp.2025
@maristelakrystalp.2025 11 ай бұрын
Why my arduino tools showing the Board: Arduino Uno instead of Board: Node Mcu you provided? Please help me asap, this will be my projects. I am a IT Student here!
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Please check this video to setup NodeMCU kzbin.info/www/bejne/f4m2q4Smm9VjpJY
@maristelakrystalp.2025
@maristelakrystalp.2025 11 ай бұрын
@@TechTrendsShameer it shows that "Error compiling for board NodeMCU 1.0 (ESP- 12E Module)" how can i fix this? i already connect my board in my laptop
@maristelakrystalp.2025
@maristelakrystalp.2025 11 ай бұрын
please reply me asap :)@@TechTrendsShameer
@KorupalaTejaswini
@KorupalaTejaswini 13 күн бұрын
The website link for equipments is real???
@TechTrendsShameer
@TechTrendsShameer 5 күн бұрын
Yes. It's real. For for psst few months the site is taking more time to deliver. You can try the below websites Robu.in Zbotic.in
@vijaynaru
@vijaynaru 7 ай бұрын
there are error in code. nodemcu pin to be defined as D2 and not 2. further GAS value is not getting printed in serial monitor being not defined
@TechTrendsShameer
@TechTrendsShameer 7 ай бұрын
Both are correct. If you define as D2, you need to connect to PIN D2 in Nodemcu. If you mention as 2, then you need to connect the D4 in NodeMCU (GPIO4).
@Fatechanger2219
@Fatechanger2219 7 ай бұрын
Which app did u use for simulation
@themagniranthine
@themagniranthine Ай бұрын
You mean fritzing?
@Fatechanger2219
@Fatechanger2219 Ай бұрын
@@themagniranthine Nothing bro by the time you replied my project also got completed
@aliif.haikall
@aliif.haikall Жыл бұрын
can i know the details name of the I2C conver?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
I2C Module for 16x2 (1602) Character LCD
@amnanafeesaabdulrahman7886
@amnanafeesaabdulrahman7886 5 ай бұрын
can i know your system is successful or not
@towseefYoungestIASTrainer
@towseefYoungestIASTrainer Жыл бұрын
To which u connected the air quality monitoring device that black cable is it to Laptop Plzz say it fast
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Yes. I connected to laptop. You can connect using power bank too.
@bipuu
@bipuu Жыл бұрын
hello, can i do this project without the I2C Converter?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Yes. You can. But code and circuit will change.
@mohithr3604
@mohithr3604 4 ай бұрын
​@@TechTrendsShameerupload a video for that also
@aidilrozlan6066
@aidilrozlan6066 25 күн бұрын
What if I don't use 12C Is it still working or not?
@TechTrendsShameer
@TechTrendsShameer 25 күн бұрын
You can use without I2C, but the connections will be different and you need to make few changes in program.
@maristelakrystalp.2025
@maristelakrystalp.2025 11 ай бұрын
can you give me a report about the blynk and thingspeak iot for air quality monitoring system? I am a student here! hope you will answer asap!
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Contact me in Instagram.
@maristelakrystalp.2025
@maristelakrystalp.2025 11 ай бұрын
hello! i already message you on instagram! @@TechTrendsShameer
@Funuv22
@Funuv22 7 ай бұрын
Hii maristela can you give me your report?
@Funuv22
@Funuv22 7 ай бұрын
​@@maristelakrystalp.2025 hii maristela can you give me your report?
@aliif.haikall
@aliif.haikall Жыл бұрын
why i cannot find the esp8266 in fritzinf app?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Many parts are not available. You can download from this and import in fritzing github.com/squix78/esp8266-fritzing-parts/blob/master/nodemcu-v1.0/NodeMCUV1.0.fzpz
@maleakhisamosir3662
@maleakhisamosir3662 10 ай бұрын
Sir did u know jow to replace it to lcd TFT
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
I haven't tried.
@akankshapasalkar8413
@akankshapasalkar8413 11 ай бұрын
Sir i dont want to use I2C controller then it will okay or not
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
You need to modify the code if you are not using I2C.
@rishitgarg
@rishitgarg Жыл бұрын
If we not apply screen did project work
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Didn't get your question.
@rishitgarg
@rishitgarg Жыл бұрын
@@TechTrendsShameer means in code led code is also there so if does not connect 16x2 led so project work I have dht 11 and mq 135 sensor
@rishitgarg
@rishitgarg Жыл бұрын
My project is working fine with dht 11 sensor and is giving output to blynk but when I tried to run with your code which includes 16x2 led screen,mq135 sensor and dht11 sensor blynk is not showing error.i have not attached led 16x2.
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Remove the lcd code and try.
@themagniranthine
@themagniranthine Ай бұрын
how to find template id and template name also auth token on blynk?
@atakanatay8376
@atakanatay8376 3 ай бұрын
What is the maximum value that the gas sensor can show? What is the maximum number I can write instead of 600?
@BhargavM-e9h
@BhargavM-e9h Жыл бұрын
Sir can u make the detailed video about the code and connection or can u explain it in comment section
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Ok
@faisal-k2e
@faisal-k2e 8 ай бұрын
please help there is an error that says BlynkSimpleEsp8266.h: No such file or directory
@TechTrendsShameer
@TechTrendsShameer 8 ай бұрын
Install Blynk library.
@sadiatasfia5047
@sadiatasfia5047 Ай бұрын
LCD isn't working but blynk app showing the result. How can i solve this problem?
@TechTrendsShameer
@TechTrendsShameer Ай бұрын
Check this. kzbin.info/www/bejne/e53QfX55Z8ych5o
@RameshBabuP-x9h
@RameshBabuP-x9h 11 ай бұрын
I am getting Compilation error: DHT.h: No such file or directory message, what should I do ?
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Install the DHT library from Arduino IDE -> Tools -> Libraries.
@shamouelansari7490
@shamouelansari7490 8 ай бұрын
sir how will the display will get turn on and how will it get power please reply its urgent its for my ty final year project
@SrishtiDubeyE
@SrishtiDubeyE 8 ай бұрын
hello, I need the flow chart of the circuit.
@shivamagrawal9597
@shivamagrawal9597 Жыл бұрын
Sir how it will be powered
@shivamagrawal9597
@shivamagrawal9597 Жыл бұрын
Means can it will run with battery
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Yes
@missilegamer4375
@missilegamer4375 25 күн бұрын
Sir I have doubt, can we see output without lcd display on phone or laptop any chances are there sir ?
@HahaRedacted
@HahaRedacted 25 күн бұрын
😭🙏
@Mini_vlogs2484
@Mini_vlogs2484 Жыл бұрын
Program is that much only??
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Yes.
@samarthjachak7359
@samarthjachak7359 Ай бұрын
Sir can you please provide full code for this IOT device 🙏🙏
@noviramadani5632
@noviramadani5632 Жыл бұрын
Sir, why is my lcd not showing the value?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Use the LCD library mentioned in the description and also adjust the potentiometer in I2C converter and try.
@noviramadani5632
@noviramadani5632 Жыл бұрын
@@TechTrendsShameer Thank you!
@devanshigupta7162
@devanshigupta7162 8 ай бұрын
Do you sell such projects?
@aimi9374
@aimi9374 Жыл бұрын
can u named all components that u used in fritzing?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Please check the video description for the components details.
@shubhangigavhale654
@shubhangigavhale654 7 ай бұрын
Sir my node mcu board do not turn on after power supply can I give external power supply for this system please reply to me sir it's important because my final practical exam ahe
@MokshaParmar-c8j
@MokshaParmar-c8j 8 ай бұрын
How much will this project cost?
@TechTrendsShameer
@TechTrendsShameer 8 ай бұрын
Components link provided in video description. Please check.
@harshithac8555
@harshithac8555 3 ай бұрын
It's shows the error and blynk sampleEsp8266.h No such file or directory like this
@TechTrendsShameer
@TechTrendsShameer 3 ай бұрын
Install the Blynk library
@vnyzdecastr0
@vnyzdecastr0 9 ай бұрын
Hello is this really working, i planned to do this with our project
@TechTrendsShameer
@TechTrendsShameer 9 ай бұрын
Yes. You can see the output in the video.
@vnyzdecastr0
@vnyzdecastr0 9 ай бұрын
Can it be use, using Arduino uno r3
@vnyzdecastr0
@vnyzdecastr0 9 ай бұрын
Is this the same code if i used arduino uno r3 than nano?
@TechTrendsShameer
@TechTrendsShameer 9 ай бұрын
Code will change.
@TechTrendsShameer
@TechTrendsShameer 9 ай бұрын
Code will change.
@ಬಣ್ಣಬಣ್ಣದಲೋಕ-ಣ6ಠ
@ಬಣ್ಣಬಣ್ಣದಲೋಕ-ಣ6ಠ 3 ай бұрын
Sir im getting error as lcd.begin() as liquidcrystal
@TechTrendsShameer
@TechTrendsShameer 2 ай бұрын
Follow this video. kzbin.info/www/bejne/e53QfX55Z8ych5o
@Nithin_1367
@Nithin_1367 10 ай бұрын
Provide the connection for interfacing of circuit
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
Its in the video. Watch full video.
@Nithin_1367
@Nithin_1367 10 ай бұрын
Which IDE version you are using in this project
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
Arduino 1.8
@novogames
@novogames 6 ай бұрын
Hi sir , When I upload code in nodemcu board it's showing a warning: library liquidcrystal i2c claims to run on avr Architecture(s) and may be incompatible with your current board which runs on esp8266 Architecture(s) And my lcd is not showing anything
@brianwijaya7378
@brianwijaya7378 2 ай бұрын
Have u fix the problems ?
@novogames
@novogames 2 ай бұрын
@@brianwijaya7378 nope
@seajanginisv7892
@seajanginisv7892 24 күн бұрын
Bro whether output came.. did you troubleshoot this problem
@gohilharsh501
@gohilharsh501 2 ай бұрын
Your website name please...
@TechTrendsShameer
@TechTrendsShameer 2 ай бұрын
instagram.com/tech_trends_shameer/
@errornotfound7841
@errornotfound7841 10 ай бұрын
im getting blank display and nothing displayed in blynk plx help
@TechTrendsShameer
@TechTrendsShameer 10 ай бұрын
Adjust the potentiometer
@shindeanirudha9999
@shindeanirudha9999 9 ай бұрын
Sir what is budget
@THANGAPANDIE
@THANGAPANDIE 8 ай бұрын
How to measure aqi value
@ParvJain-h1n
@ParvJain-h1n 9 ай бұрын
sir we are getting error as "A fatal esptool.py error occured: Write timeout" what to do
@TechTrendsShameer
@TechTrendsShameer 9 ай бұрын
Remove the cable and connect again.
@soyaibansari3398
@soyaibansari3398 Жыл бұрын
Sir atleast make detailed video about it as most of the people are new to this things like me please provide more info like explaining the code how do we upload the code how to connect blynk to our esp8266 or any other board as of now i am stuck that i have uploaded the code..... followed every step you said and still not working...help us
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
I explained the steps of blynk connection in the video. Esp8266 Setup I explained in a separate video. If I include esp8266 Setup steps in every video, video Length will get increased.
@soyaibansari3398
@soyaibansari3398 11 ай бұрын
​​@@TechTrendsShameerI've used the small sized bread board did the connection as you showed in circuit diagram idk what is happening my display is not showing any reading form humidity temperature sensor it shows nan% and in MQ135 sensor I am always getting higher number and on blynk dashboard am not getting any reading what to do?
@sanjaykhatri6093
@sanjaykhatri6093 8 ай бұрын
Nice project but if i have to use this in the open field it is not working as there is no wifi connection so pls can you make A project that works on arduino nano as it does not Requires wifi connection and can sense Air Quality anywhere without wifi or internet connection
@ZainIbrahim-y1x
@ZainIbrahim-y1x 3 ай бұрын
Hey! we are also working on a similar idea that you referred, did you find any similar videos/projects related to that? Also please tell us because we are going to make it a final year project. Thanks
@sanjaykhatri6093
@sanjaykhatri6093 3 ай бұрын
1 person by the name vk technology has put the project on youtube is working without wifi with ardu nano but has not put code in the discription and is asking 1000 Rs for code
@sanjaykhatri6093
@sanjaykhatri6093 3 ай бұрын
It is vmk projects
@sanjaykhatri6093
@sanjaykhatri6093 3 ай бұрын
It is vmk technology
@RISHIRAJ-t7z
@RISHIRAJ-t7z Жыл бұрын
Code is showing errors , It says: "No such file or directory"; Please Help ASAP
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Install the library
@EVERY.CIRCUIT
@EVERY.CIRCUIT Жыл бұрын
Wow
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Thank you
@sumithar1797
@sumithar1797 23 күн бұрын
Sir i like your project. I have a doubt for every air like fresh air and smoke it will show same result or different one.
@TechTrendsShameer
@TechTrendsShameer 17 күн бұрын
The sensor will show different results for fresh air and smoke.
@laasyan3291
@laasyan3291 6 ай бұрын
can i get the circuit diagram sir ?
@TechTrendsShameer
@TechTrendsShameer 6 ай бұрын
Its in the video.
@mjplantilla4672
@mjplantilla4672 11 ай бұрын
Could you send the full code?
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Check video description.
@Shin-d8b
@Shin-d8b 5 ай бұрын
sir i need answer ASAP the code is working but the gauge in blynk is not showing the data can you show me how please😭😭😭
@TechTrendsShameer
@TechTrendsShameer 5 ай бұрын
Check the Auth code and wifi credentials are correct.
@idk0075
@idk0075 28 күн бұрын
hey did it work?
@nostatus253
@nostatus253 Жыл бұрын
Sir can you help me how to display data of Computer screen on led board..I want to display AIqms data which coming on my computer on led signage board
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
can you please be little more clear on what you need to display?
@nostatus253
@nostatus253 Жыл бұрын
Sir.i have .txt file.in which content is there which update every 5minutes .i want to broadcast this .txt on led board
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
please message me in Instagram.
@mdjamal9527
@mdjamal9527 Жыл бұрын
sir how you connected the lcd display on bread board please tell
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Just place the LCD on the breadboard and press it
@unprofessionale
@unprofessionale Жыл бұрын
WARNING: library LiquidCrystal I2C claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s). It says like this when I try to compile,what should I do sir?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
You need to install that library LiquidCrystal I2C
@unprofessionale
@unprofessionale Жыл бұрын
@@TechTrendsShameer yes I did but the problem still persists sir
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
still same error ?
@unprofessionale
@unprofessionale Жыл бұрын
@@TechTrendsShameer ya actually I install more than one library(liquidcrystal)...but still the same
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Remove all the old libraries and use this one alone. github.com/Tech-Trends-Shameer/LiquidCrystal-I2C
@natashaazaidi
@natashaazaidi 11 ай бұрын
Can i get full coding ?
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Check video description.
@rafaelleal8315
@rafaelleal8315 2 жыл бұрын
Could you provide the complete code, please?
@TechTrendsShameer
@TechTrendsShameer 2 жыл бұрын
Yes. I have sent the complete source code to your email. Please check.
@rafaelleal8315
@rafaelleal8315 2 жыл бұрын
@@TechTrendsShameer thank you very much friend!
@TechTrendsShameer
@TechTrendsShameer 2 жыл бұрын
Welcome. Keep supporting.
@yatheesh3624
@yatheesh3624 2 жыл бұрын
Bro please send code
@thaqifkhalaf1100
@thaqifkhalaf1100 10 ай бұрын
​@@TechTrendsShameer sir can i have full code
@12stem4-balibalitaaeronsmi8
@12stem4-balibalitaaeronsmi8 Жыл бұрын
Thank you, it helps a lot!
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Glad it helped! Please Subscribe.
@clobel55
@clobel55 Жыл бұрын
how can you say that? This guy can't speak English
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
@@clobel55 Didn't get you. May I know what you mean?
@SFFRN19
@SFFRN19 8 ай бұрын
​@@clobel55Lmao The irony of this white man
@rohan8655
@rohan8655 Жыл бұрын
Sir we are making this as our semester capstone project please help us relate to this project
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Please contact me in Instagram instagram.com/tech_trends_shameer/
@rohan8655
@rohan8655 Жыл бұрын
Sir circuit diagram is not provide it
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Its there in the video. Please watch the full video.
@Sai_Aesthetic
@Sai_Aesthetic 11 ай бұрын
Sir it showing error on #include
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Install the blynk library.
@MekalaAruna-rh5rk
@MekalaAruna-rh5rk 11 ай бұрын
How to do computer coding i cant understand that where should i go for the coding
@Denge-Denge
@Denge-Denge 8 ай бұрын
Arduino sketch
@shadowthehedgehog5303
@shadowthehedgehog5303 Жыл бұрын
🎉
@Prasant-x2z
@Prasant-x2z 8 ай бұрын
brother pls help me using this code my lcd is not working it is not responding to the commands
@mariusmatawaran30
@mariusmatawaran30 Жыл бұрын
How do you fix this error? 'class BlynkWifi' has no member named 'email'
@hildansaputraaa
@hildansaputraaa Жыл бұрын
do you have solution?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Remove that line and try
@imamuddinmuddin5558
@imamuddinmuddin5558 Жыл бұрын
bang program esp 82 bisa nggk di pakek sma rogram esp 32
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Yes you can use. But there is a slight change in program. Please refer this video for eps 32. kzbin.info/www/bejne/o6fHoXSbd7t8e8k
@Ashish.1717
@Ashish.1717 Жыл бұрын
why is my lcd not showing the value
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
send me the screen.
@CharanK-p5o
@CharanK-p5o 7 ай бұрын
Please give the program
@sailendraku.biswal3841
@sailendraku.biswal3841 8 ай бұрын
I2C showing warning
@TechTrendsShameer
@TechTrendsShameer 8 ай бұрын
Install the library.
@dumbskull106
@dumbskull106 11 ай бұрын
Can i get the full code please 😊
@TechTrendsShameer
@TechTrendsShameer 11 ай бұрын
Check video description
@shadowthehedgehog5303
@shadowthehedgehog5303 Жыл бұрын
Pasa el archivo de la aplicación, no encuentro todos los componentes porfa!!!
@rohan8655
@rohan8655 Жыл бұрын
We are not able to mae it work can you help us sir pleas
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Please contact me in Instagram instagram.com/tech_trends_shameer/
@rafiulkabir8096
@rafiulkabir8096 Жыл бұрын
Can you make me programme for arduino nano whit out esp
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
This program we can't do with Arduino Nano since nano board doesn't have WiFi.
@aisyhanur8432
@aisyhanur8432 Жыл бұрын
Hi can u give me connection all component ?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Connection is mentioned in the video. Please check.
@ManiKandan-fb7sb
@ManiKandan-fb7sb Жыл бұрын
My Port is Not Visible Sir ?
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Install this Driver cp2102 driver
@ayanahmad8897
@ayanahmad8897 Жыл бұрын
Sir please can u gave me source code of this aurdino
@TechTrendsShameer
@TechTrendsShameer Жыл бұрын
Please check video description
@SabarishRamesh
@SabarishRamesh Ай бұрын
bro i need circuit diagram
@TechTrendsShameer
@TechTrendsShameer Ай бұрын
Please message me in Instagram.
@amnanafeesaabdulrahman7886
@amnanafeesaabdulrahman7886 5 ай бұрын
its error no matching function liquidcrytal 20,4
@TechTrendsShameer
@TechTrendsShameer 5 ай бұрын
Which lcd display you are using ?
@amnanafeesaabdulrahman7886
@amnanafeesaabdulrahman7886 5 ай бұрын
@@TechTrendsShameer i use lcd display 1602 module blue
@ayeshasuhaiba683
@ayeshasuhaiba683 10 ай бұрын
Sir if I convert c code to Python ,it possible to come output
Your home's air could be making you sick. Fight back!
13:24
Jeff Geerling
Рет қаралды 335 М.
小路飞还不知道他把路飞给擦没有了 #路飞#海贼王
00:32
路飞与唐舞桐
Рет қаралды 75 МЛН
Car Bubble vs Lamborghini
00:33
Stokes Twins
Рет қаралды 38 МЛН
HELP!!!
00:46
Natan por Aí
Рет қаралды 51 МЛН
Measuring Air Quality with ESP32 & Arduino
1:01:13
DroneBot Workshop
Рет қаралды 115 М.
New Blynk IOT Smart Plant Monitoring System
16:54
Viral Science - The home of Creativity
Рет қаралды 418 М.
Что купить новичку в Arduino? Большой обзор
21:49
Заметки Ардуинщика
Рет қаралды 918 М.
DIY Air Quality Monitor - PM2.5, CO2, VOC, Ozone, Temp & Hum Arduino Meter
16:15
I Made The Ultimate Cheating Device
9:39
ChromaLock
Рет қаралды 1,3 МЛН
How to do Object Detection using ESP32-CAM and Edge Impulse YOLO Model
16:50
Air Quality Monitoring and Alert System using Arduino with MQ135
11:53
ECIT Engineering
Рет қаралды 101 М.
小路飞还不知道他把路飞给擦没有了 #路飞#海贼王
00:32
路飞与唐舞桐
Рет қаралды 75 МЛН