How to mount 104BCD OVAL chainring to 104bcd crank

[@indonesiaamerica7050]

Can the 34t be mounted as a direct replacement for Shimano Ultegra 8000 inner rings and the original bolts?

[@nathanmoore160]

Where can I find a oval chainring for a shimano saint m820-5 with 32t and 104bcd

[@vpower483]

Hello I ended up buying a 32t for my slx crank M7000. The stand-offs dont fit in the bolt hole. The shorter bolts that fits the shimano chainring is not long enough to grip the oval chainring due to the stand-offs. What are my options? Do I buy longer bolts or is there an absolute black variant with 32t without the stand-offs?

[@darrenrussell3214]

i guess I'm pretty off topic but do anybody know a good site to watch new movies online ?

[@williamchevez8461]

Where I can get those chainring for my XTR M980 crankset?

[@AbsoluteblackCc]

Hi William, you can find the rings for the XTR M980 on this link below. absoluteblack.cc/oval-104bcd-chainring.html

[@nordiga]

Are these double-ring bolts? Can double-ring bolts be used with the 32t ring? Or need to buy new single ones?

[@AbsoluteblackCc]

yes they are effectively double ring bolts

[@Painsoreal]

Helpful 🤌🏽✨

[@Johnerickstain]

I have a oval chain ring but doesn't fit to my crank

[@anllvr]

why no 44T? it's pretty popular for fixed/single speed setup?

[@adistar168]

Awaiting 44 or 48 teeth 104bcd too

[@Siklistamo]

name of chainring or brand??

[@ajack6521]

absoluteBLACK is the brand

[@rhynhartnagac9858]

What if?

[@pauljames4858]

just say that the crank goes at the narrow bit!, most don't have orientation marks, mine don't! , also, what is point in the standoffs?? surely crank against ring is fine???, you seem to suggest that the standoffs are there for a reason, but won't elaborate! also!!, you should be mentioning the possibility of fitting the ring to the outside of the crank spiders, it looks better there, and can be fit and indeed swapped without removing crank arm..

[@barefootbob1269]

Mounted dozens of these never seen one without an orientation mark. The reason for standoffs is because the smaller ring won't have clearance for the chain on the spider. You can fit and change the ring on the inside without removing the crank arms also. You really don't want it on the outside be cause of the chain line. You can do it if that's the look you want.