How to MOUNT a MOFFETT Piggyback Forklift on ANY Trailer - CDL TIPS AND TUTORIALS

[@JCCbama]

I have an interview coming up for a job driving a Moffet truck , thanks for making this helpful video.

[@luisf7105]

You have a real knack for teaching, thank you!👊🏽

[@GeneRollin]

Thank you I appreciate it, I’m glad the video was helpful!

[@timothyrobertson-l3b]

thank you for your video. i start a new job monday with a moffett. Great job!

[@madvillainy6845]

This is an excellent tutorial. I mean, I never used one of these, but I've seen trucks with it one the back. I didn't even know it was called a Moffett until I saw this video.

[@GeneRollin]

Thank you I appreciate it

[@celticzgu7343]

Thanks my man, very helpful video. Starting a new job next week driving a moffet truck and this was very thorough.

[@GeneRollin]

I’m glad this video helped you! I miss the Moffett somedays

[@michaelliberty1007]

Awesome brother thanks so much

[@stephenraustin]

Sweet intro to Moffett loading! Well done sir.

[@GeneRollin]

Thank you I appreciate it!

[@dannyratliff9240]

Great thorough description of process.

[@GeneRollin]

I’m glad the video helped you!

[@jerrybatley92]

Very helpful and clear

[@moffett.flatbed.training]

Great commentary. Nicely done.

[@GeneRollin]

Thank you, I appreciate it!

[@kevinhaberman8897]

Very good explanation.

[@GeneRollin]

Thank you, I appreciate it and I hope it was helpful

[@williamrainville5794]

well done demo thankyou

[@GeneRollin]

Thank you, I’m glad it was helpful!

[@JerseyToTheBone]

Can you mount a Moffett to any flatbed trailer? I have a 22ft Big Tex 14OT and I wanna deliver crated firewood that is on pallets. Please advise, thanks much, guys!

[@AJ-zg7sc]

Dude just drive into the fork pockets with the mast fully extended out

[@GeneRollin]

If you do that sometimes you won’t be in tight enough to connect the support chains. The chains are the exact length and they don’t give you any extra play to be a little off on securing the forklift to the truck (at least on ours)

[@Truth-seeker03]

My man!!..thank you

[@GeneRollin]

Glad the video helped you!

[@bringjeffthehorizon]

Explains it good, only different is the one we have at work you have to lift it up over two bars/pins so it rests on the pins

[@hectorcabrera7662]

Very helpful… thanks..are you a Owner Operator and a Forklift operator independently ?

[@GeneRollin]

Thank you I appreciate it and no I’m not

[@davidponder5537]

We’ll-done!

[@midastouch7773]

Great Job Bro. Appreciate that

[@jerrykinnin7941]

I seen these for years. I've never had any training or idea how they mounted them. How much does a moffet lift weigh?

[@GeneRollin]

I want to say about 4,000 pounds, I’m sure that could vary

[@azzimohamedamine1240]

Hello brother, I have a truck driving license and a maintenance and forklift driving certificate. I want to work in a company. Is there any help?

[@cheqreligion]

My mass always have a slight space in between it and the trailer ! I can’t get it tight for nothing😅 I’m gonna this method though Thanks

[@ramonherrera4275]

How to I get training to be certified to operate a Moffett?

[@gustavoespitia8055]

Are there carriers with these equipments in Florida?

[@GeneRollin]

Not too sure, I’m out of Texas

[@AJ-zg7sc]

Yes they are everywhere in Florida. They don't pay the greatest down there though.

[@michaelliberty1007]

Find out tomorrow

[@MrBigR928]

I always wondered how they loaded one of those 🤔👍🏿

[@EduardoMendezNaranjo-bh2rr]

Adond tiene el equipo

[@thatphillykidty2155]

🙌🏿

[@GeneRollin]

Hope the video was helpful for you

[@thatphillykidty2155]

Yes it was I just started driving a Moffett as well nice to have someone break it down 🙌🏿

[@GeneRollin]

@@thatphillykidty2155 that’s wassup! Keep hustling bro

[@RunningBear1300]

Decent instructions but you're saying to inline it with the outside edges, when you should be saying the inside edges.

[@mickeymaddog5685]

Hardest part is putting the forks in

[@GeneRollin]

It does get easier after a while

[@valasvasta5148]

You complicated to much. Whay you muve your fork 3 time for nothing? Lift fork on proper high whit zero tilt, extend fork 10 cm forwards, drive moffet to the truck and kick truck with fork backrest. Then tilt on slyly back to zero position and run forward as is posible to backrest tuch truck again. Then lift forklift in aer and sort forks bacwars . Conect chain and tilt forks of to moffet sit on the chains. In thap position moffet do not siting on the fork then on thefront tires and chains. In that position front cilindars on the forks is not on the presure. If during driving oil hosu burst, moffet which hang on forks by fors will drop down on the chain cylinders and all conection will be lose. But if fork already stay suport by the chain . Dhere is no presure on forks cilindars and no chance nothing burst. So you must prevent that inconvenience during moffat transport.