How to move and adjust a sprinkler head. Orbit Voyager II

[@meighkee]

Great video, thank you. You explained the adjustment for the stop limit on the rotation, but not so much on the start limit. There doesn't seem to be an adjustment for that. I've seen videos telling us to unscrew the top and lift out the 'guts' and physically rotate it to get your start limit where you want it but there's got to be a better way. Your thoughts? Thanks again!

[@Type5Reviews]

Thanks for the feedback. For the start limit, normally I turn the top dial to the starting position and then I'll turn the entire base until its snug on the threaded fitting, but in the proper direction. If the head is already burried, then I just use one of the white adjustment keys to pull the head out and then rotate the starting point by hand using force. You'll probably hear it click while doing it this way but I definitely don't think you need to unscrew the whole thing and take it apart.

[@meighkee]

@@Type5Reviews Thanks much. It is buried, and did lift up the head and tried to turn it but I guess there's gear teeth in there and it's pretty hard to turn. Still think it's a design flaw. The adjustable spray pattern is one thing but the start and stop positions are just as critical. Thanks again.

[@Type5Reviews]

No problem. Yeah it does take a good amount of force to cause the heads to skip teeth. If that’s not working for you you’ll have to dig it up a bit and spin the base. Good luck.