How often do I change the oil? Every 10,000 miles?
@ShowemRight4 жыл бұрын
Clipper oil makes the best oil to lubricate pistols and rifles too. Heres a tip to sharpen your clipper blades. Get yourself a bag or container of GRITS or Corn Meal, pour a few tablespoons of it into a bowl, and turn on your clippers and while its on and running just put your clipper blades into the Grits and push some of the grits into the running blades. The Clippers will turn some of the grits into a fine powder, and thats ok...let it run in the grits for a few minutes, the grits act as an abrasive on the metal blades and it will sharpen the blades without damage, and spray off your blades after turning it off with clipper spray, and oil the blades, and your blades will be as sharpened as the day you bought it.
@janwilliams1784 жыл бұрын
Sounds like a good idea I'll give it a try thank you.
@cokaine20006 жыл бұрын
Good vid really got the information I needed how to clean and oil the proper way. Although I only use my andis clippers for grooming my own face it’s great to keep them in good condition thanks again.
@cryptopunk5654 Жыл бұрын
Thank you very much. Really concise and simple explanation. No drama or background music. Great!!! (I couldn't use your cool care link since both take me to blade oil products)
@Gears_Starting5 жыл бұрын
Would you suggest oiling clippers right before using them, after using them, or both?
@jacobsebastien39105 жыл бұрын
Both
@andy_the_monger17954 жыл бұрын
@@jacobsebastien3910 Wouldn't it clog the clippers or make it too oily, oiling both before and after cutting
@bobbarker5884 Жыл бұрын
After cleaning them. That's all that's needed
@Gears_Starting Жыл бұрын
@@bobbarker5884 That makes sense. Thank you for the advice.
@Earlzo23252 жыл бұрын
Hi, what sort of grease do you use for the motor? I've got a wahl clipper and cleaned out the magnet/rotor area, not sure whether to use lithium grease or silicone.
@Valor4Christ3 жыл бұрын
Long story short.. 1. Use real thick oil (not spray) 2. Oil it turned on, get the blade all oiled 3. Do it after every use of your clippers Starts at 6:19
@larrythebarberman3 жыл бұрын
Thank you so much for the short story re-write you are too kind 🙏
@Valor4Christ3 жыл бұрын
Great video!!
@kova15772 жыл бұрын
Turning them on and oiling it is words to live by if you don’t like going in dry
@Kings_Landing_Serf2 жыл бұрын
How often shd I be oiling my blade if I use my clippers 4-6x a week?
@adz15252 жыл бұрын
Do you do this whole technique with 3 point oiling after cutting as well ?
@frankyvee14 жыл бұрын
Can the common house whole 3 in 1 oil be used as well to lubricate? I just so happen to have an 8 oz bottle of 3 in 1 oil that I use on my sewing machine.
@leftyseel86582 жыл бұрын
Got a new pair or razor. Is there a specific oil that should be used? Mine got a free small bottle and i’m wondering if i can just use baby oil when the free bottle gets used up.
@josephmartinez20353 жыл бұрын
Thank the is good technique and information
@curtisadams433 жыл бұрын
Thank you Larry mr barberman!! :)
@JamesCarmichael4 жыл бұрын
Great video man thanks. Up until now I just bought a clipper for you hair and a trimmer for my beard and I never read the instructions. I never figured out what the oil was for and as a result I'd throw them out and get a new one within a couple of months. Does it have to be trimmer oil or would I use an vegetable oil such as coconut or rapeseed? The shops are closed because of the C-19 lockdown at the moment and those kinds of oils are the only ones I can get my hands on.
@juhanjulm30742 жыл бұрын
Thank You!
@lexbeltran13543 жыл бұрын
Can I use rubbing alcohol to disinfect the blades?
@REYMARTZHD3 жыл бұрын
Hi can you share the link the pipe cleaner brush?
@zackrider37084 жыл бұрын
my question is; when will you need to oil your electric razor ??
@bojantanasic2215 жыл бұрын
Can I use sunflower oil? The viscosity is higher and also a little lower than olive oil.
@Operafan754 жыл бұрын
Very helpful. Thank you.
@brianalvarado76685 жыл бұрын
Perfect explanation
@Magnetar833 жыл бұрын
Can you use baby oil?
@Mike-Oxlong833 жыл бұрын
Smart Guy.
@itsmenishma60094 жыл бұрын
Thank you
@neerajarr4 жыл бұрын
What should be the frequency of oiling the clipper
@wildestcowboy26682 жыл бұрын
Yap yap yap, 521 befo he actually showed how to oil the clippers.
@johndoe34853 жыл бұрын
That accent is gangsta.
@donellis50054 жыл бұрын
Where do we get the pipe cleaner from?
@jhaypzdee91735 жыл бұрын
too much talking... 6:20 is what I'm looking for.. Thanks though
@pulakification4 жыл бұрын
John Paul Dulnuan how to lengthen a 30 second video to a 9 minute one.
@adamgoyer20776 жыл бұрын
Very helpful, ty
@jrcastrorwc5 жыл бұрын
Great vid. Thanks
@cmoneytheman4 жыл бұрын
just use the oil dont need the other stuff if only using the blade on ya self or not to many folks its all i use and blade is sharp
@leeknoz9354 жыл бұрын
why can't i remove the back of my wahl senior cordless clippers?
@ShaneStanley1094 жыл бұрын
Okay that's all good but how often should you oil them !!
@cmoneytheman4 жыл бұрын
use 4 or 5 times a month or 6 depends how much u shave
@dominicdarksdale64156 жыл бұрын
Thanks!!!!
@niceone119874 жыл бұрын
Hi, where can I get the pipe cleaner?
@larrythebarberman4 жыл бұрын
niceone11987 easy!! Amazon or ebay
@pcola_florida_brotha3 жыл бұрын
I seen this material before around holidays but I just don't know the proper name of it dang but it's a great idea and video😂😂😂
@SooMajor6 жыл бұрын
Big up Larry
@sanketdeshpande3694 жыл бұрын
How often should I oil my clippers?
@AlphaFlight3 жыл бұрын
I find using oil cuts hair better also.
@telephonic3 жыл бұрын
6:19 before he actually oils the clippers.
@larrythebarberman3 жыл бұрын
Excuse me, I am a bit show
@khalil70113 жыл бұрын
@@larrythebarberman Some of the comments are pretty harsh but don't let it upset you man, although I wish this video was only as long as it needed to be. Thanks for the vid 👍
@larrythebarberman3 жыл бұрын
Not upset at all!! I am all good
@stress.relief4 жыл бұрын
“Gunk & Goop”
@BunnyJsTiktokChallenges5.9m3 жыл бұрын
Giggs
@kova15772 жыл бұрын
It’s much preferable to go in high and dry
@qms47684 жыл бұрын
✂️
@larrythebarberman4 жыл бұрын
good, bad, or you want information on it?
@qms47684 жыл бұрын
@@larrythebarberman excellent presentation & very informative 👏
@larrythebarberman4 жыл бұрын
@@qms4768 oK thank you very much!!!
@washx2k7554 жыл бұрын
can you use any oil?
@cmoneytheman4 жыл бұрын
yea shouldnt matter
@alimpy61623 жыл бұрын
can i use wd40?xd
@larrythebarberman3 жыл бұрын
No it is not oil w = water 💦 d = displacer
@HM-ke1qm4 жыл бұрын
No wonder my hair is oily.
@abdulhalimpourdaryaei34955 жыл бұрын
Thank you man, It was useful
@creativecow3294 жыл бұрын
Dude, that tissue toss was worth watching this whole video. That shit was smooth 🎩
@danh83584 жыл бұрын
Lmao. Facts.
@J_PIK5 жыл бұрын
Excellent tutorial. I bought a new pair of clippers to do my son's hair and in the directions it just said "Oil the clippers" without any instructions on how to do so. You explained things beautifully. Thank you so much.
@soulwebster22843 жыл бұрын
That’s exactly what led me here to 🤣
@solitudeeee4 жыл бұрын
"not clipper oil by any stretch of imagination" hahahah
@simopr094 жыл бұрын
6:02 what is he doing with his right arm?
@DuyDepTraiPhoBaTrieu4 жыл бұрын
Damn COVID-19 I had to oil up my old clipper so I can cut my own hair at home :(
@Bsizzle924 жыл бұрын
That's why i'm watching this video. I got to learn how to cut my own hair 😞
@tonycrete4 жыл бұрын
Damn COVID-19, I had nothing left to do inside the house, I even oiled my trimmer #toomuchfreetime
@steven.m99844 жыл бұрын
Same Here
@Curling_Rack4 жыл бұрын
LOL
@dalericks334 жыл бұрын
Same here
@klakklaksd4 жыл бұрын
Perfect teaching, the way you layed out the information was perfect and smooth for learning. I appreciate your in depth knowledge and sharing it .
@RoyaltyProductionsDA6 жыл бұрын
Most informative dude I’ve ever listened to, on a barbers youtube cannel 👊🏽Subscribe👍🏽
@larrythebarberman6 жыл бұрын
thank you!!
@victorvaldez67855 жыл бұрын
Thank you for the video Larry. I'm not a barber myself but I have an Andis T liner and judging by your video, I was not oiling the blades properly.
@TheHyena-ru8bz6 жыл бұрын
Damn Larry! That was an excellent video! Straight to the point and in depth. I didn't know the difference between the oil and spray. Thank you!
@mrplod16166 жыл бұрын
Great advice right up to the oiling part! It is just as important to oil the back rail as it is the front. It is metal to metal, just the same and any heat generated here will transmit to the front.
@kevinjohnson95334 жыл бұрын
Thank you Larry. The right information delivered very simply and directly. Sorted out my home use clippers to perfection.
@rmrbush4 жыл бұрын
God damnit, all these years I figured I had to disassemble the shit. This is fucking simple. This is one of the things you miss out on being raised by a woman.
@JeVeuxReussir_5 жыл бұрын
Thank you
@AngelaMalo-dj7ke9 ай бұрын
Thank you this helped a lot especially for a first time user like myself
@RAMROD18473 жыл бұрын
Got my first pair of wireless clippers. Want to keep them in pristine condition for as long as possible. 🖖
@larrythebarberman3 жыл бұрын
Ok that makes sense - then you should be cleaning them with H-42 or charcoal starter fluid,, both fluids are ultimately Distillates (petroleum) hydro treated light - cleaning your clippers with this fluid before oiling them - will keep them in pristine condition - I am tipping you ahead of a new video....
@SilkCityOG7 жыл бұрын
Larry really knows his stuff. Salute.
@jasonc19966 жыл бұрын
Kyle Matthews It's common sense
@ExtremeShez6 жыл бұрын
Thanks Larry. It was comprehensive for home users.
@larrythebarberman6 жыл бұрын
i try!!
@JoseSanchez-bo7zb3 жыл бұрын
Where can I find a pipe cleaner?
@larrythebarberman3 жыл бұрын
Amazon - no problem
@ijustlovebritcoms4 жыл бұрын
Thank you! Makes sense to me, basically what I needed to know about where to apply oil and how much to use. Can’t visit my hairdresser so just bought myself a nice hair trimmer and sheared off all my thick hair. Very functional but looks and feels good, ready for summer. And when it grows too long again I will shear it off again. My trimmer won’t be used very often, but still needs correct maintenance. You men aren’t the only ones in a predicament right now!
@irsabian1495 жыл бұрын
Thanks man ! Just bought my first clipper and was confused why the product gave me a tiny bottle of oil
@inchargenow3204 жыл бұрын
That is crazy! It not even half🤦♂️
@SplashIt344 жыл бұрын
Gotta think of it like a car you’d never let your transmission run with no fluid lubricating the metal parts
@kharakim4 жыл бұрын
I'm a late-comer to this video, but very much appreciate your very helpful tutorial, especially as a home-hair-cutter. Hope you and your family are well and safe in this difficult time.
@wildestcowboy26682 жыл бұрын
Your probably a late cummer to pretty much everything!
@joecool976 жыл бұрын
Do you need to put a few drops on before and after 2 or 3 Haircuts? Is it okay to have your trimmer or hair clipper turned off before you start? Just want to be safe.
@maniac33723 жыл бұрын
Amazing explanation on why its necessary to oil blades and good explanation on how to do it. I find the entrepreneur speech and "learning how to market myself" speech in videos like this suspect at best, it makes a lot of viewers feel like a number. This guy did a fantastic job in the video though, well done.
@larrythebarberman3 жыл бұрын
Thank you 🙏
@MannyGotit4 жыл бұрын
Great tip and very well done vid, thanks!
@larrythebarberman4 жыл бұрын
Thank you
@ironmike83034 жыл бұрын
Where can i get clipper cleaner? (pipe cleaner)
@ZixxTheLegend4 жыл бұрын
Asmr ❤️ voice
@sisco03046 жыл бұрын
I think mine Andis Styliner ll pulls my hair I tried to fix it once but still pulls my hair so what I due is shave my head down and let it clime out again and the I keep shaving my head down I really wanna get a new one but I think it's just the blade replacement which just got replaced
@SuperCat7174 жыл бұрын
Late reply but clippers will pull when the blade is dull! My barber changed his every 3 months but he's a barber and said the recommendation was every 6 months, so I'm sure you can get away with much more time with yours. Anyway, hope you figured it out!
@MMAfighter381135 жыл бұрын
What causes the buzzing sound on your clippers to get really loud, louder than it should be?
@JuiceBox225 жыл бұрын
The tension, he has a video of how to adjust the tension
@TheHmurveit4 жыл бұрын
Great information, thanks. I have two questions one, having a hard time finding oil could any of the cooking oil be substituted I had heard maybe coconut oil and two I came across clippers that said they don’t need to be oiled what do you think?
@stephenshalat1814 жыл бұрын
Oster puts out clipper oil; go toAmazon; or use sewing machine oil, also available on amazon; vegetable oils are too heavy or thick for clippers.
@andy_the_monger17954 жыл бұрын
@@stephenshalat181 What about liquid paraffin ?
@r47773 ай бұрын
Awesome. This video was great. Followed it, and my clippers are humming like they're brand new. Thank you,, Larry.
@JkennGG2 жыл бұрын
Okay 3:40 was funny lmao
@larrythebarberman2 жыл бұрын
Its true
@paulfletcher3233 жыл бұрын
One of the best clipper care guide videos lots of great information Good job thanks
@johnredorn5 жыл бұрын
Thanks for the advice and video
@catrionasloanei6847 Жыл бұрын
I bought a pair of clippers for $30 on sale, and I seen they were marked down about half price. I didn't expect a miracle, but I ended up having to stop cutting my hair to apply a little more oil. I think I put a few dabs 3 times after that they seemed to work fine.
@wmw07022 жыл бұрын
7:09 You got a huge bin there!
@larrythebarberman2 жыл бұрын
No, no i the tissue was slightly smaller than the bin, so not very big at all 🎯🎯🎯
@Vegaman20244 жыл бұрын
Video is way too long
@larrythebarberman4 жыл бұрын
Alpha Lyre thanks
@billy45806 жыл бұрын
Thank you this was very helpful to me ✅
@tcooperbeauty6 жыл бұрын
Very useful advice! 👌🏽
@thebluethunderbunny23243 жыл бұрын
How long after successfully applying the oil should you wait to use your clippers?
@larrythebarberman3 жыл бұрын
As soon as the oil has run evenly through the blade
@thebluethunderbunny23243 жыл бұрын
@@larrythebarberman Thank you! I heard from someone that you needed to wait a full day. That didn't seem right to me.
@larrythebarberman3 жыл бұрын
Yeah they were pulling your chain!!!
@ranjeetsinghthapa21154 жыл бұрын
Can we use Gear oil?
@Aj-me8mo5 жыл бұрын
i cut my own hair, do i have to oil my clippers before and after i'm done using them? Every single time?
@larrythebarberman5 жыл бұрын
i would, as you should clean after every cut, which means they will need re oiling after cleaning
@Aj-me8mo5 жыл бұрын
Larry The Barber Man great thanks for the info man.
@imwidetoya52065 жыл бұрын
@@larrythebarberman what kind of oil to I use. As no oil came with my 25 peice set 🤔
@larrythebarberman5 жыл бұрын
Aj just before would be good
@imwidetoya52065 жыл бұрын
@@larrythebarberman can I use any oil. My clippers says its self oiled so I don't need to oil. I'm confused 😕
@kevocaudillo45643 жыл бұрын
Wow this is one hairy instructional how to vid! You might want to trim your next video down a little bit bit. Remember... less is more.
@estebanmenorcito5 жыл бұрын
How often should you oil your clipper
@Siberius-5 жыл бұрын
7:57 If you're using it for home use... I'd say, before every use. Not just after. Since you probably want the oil freshly applied. Rather than oil oil from last time you used it. Or you could oil before AND after, but that seems like overkill and rather pointless for occasional home use. Unless you're a barber and there's no real difference between "before" and "after", since it's mainly all just "in between".
@gregorytownes87133 жыл бұрын
AWESOME video bro.
@larrythebarberman3 жыл бұрын
Thank you!!
@gregorytownes87133 жыл бұрын
@@larrythebarberman its such a great informative video I put it on my website to show people how to PROPERLY oil their clippers. HipHopBarbersSupply .com article CAN CLIPPERS GET TOO HOT I hope you don't mind. If so just let me know and I take it off quickly. No disrespect intended.
@kitcowper35994 жыл бұрын
Reckon Larry is barberman by day Garage MC by night
@adamshalashaska56986 жыл бұрын
Hi larry, this video was very helpful. Quick question, if i use the T-outliner on just myself, how often do i need to clean and oil the blade?
@larrythebarberman6 жыл бұрын
Adam Shalashaska when the blades look dry and do not have oil - the cleaner the blades the better the performance
@anoonumos5 жыл бұрын
I'm using motor oil, works great!
@mello54393 жыл бұрын
Can virgin unrefined coconut oil be used to oil the clippers
@shendetgashi21003 жыл бұрын
How do you open that little bottle
@larrythebarberman3 жыл бұрын
With a, knife, finger nail, screw driver, etc
@shendetgashi21003 жыл бұрын
@@larrythebarberman why you didnt show how
@larrythebarberman3 жыл бұрын
Lift the pointed part with one of the above - because I was not suggesting it is the only oil to use