No video

How to Operate a D30GRGI Diaphragm Pump on a Kings Skid Sprayer | Sprayer Depot, #1 for Sprayers

  Рет қаралды 7,759

Sprayer Depot

Sprayer Depot

Жыл бұрын

Walk through the steps to properly operate a D30GRGI diaphragm pump (sprayer.shop/D30GRGI) and Greensmaster spray gun (sprayer.shop/85505) on a Kings Sprayers skid sprayer.
Kings Sprayers® and Hose Reels by Kings Sprayers® are proudly built by Sprayer Depot in Orlando, Florida. Kings are built tough from quality components and designed for maximum efficiency. Shop Kings Sprayers: sprayer.shop/Kings-Sprayers, or Kings Hose Reels: sprayer.shop/Kings-Reels.
Sprayer Depot is the #1 choice for professional spray equipment, parts and accessories. We offer thousands of products for the agricultural, lawn & landscape, groundskeeping maintenance, horticultural, hemp cultivators, and pest control industries at the lowest prices. Expert customer service from US based service technicians: www.SprayerDepot.com // 800-228-0905.
#sprayers #spraygun #kingssprayers

Пікірлер: 7
@johnmackay8732
@johnmackay8732 Жыл бұрын
Do these pumps create more gpm as the psi goes up or do they still put out 9.5 gpm at 100 psi
@Sprayerdepot
@Sprayerdepot Жыл бұрын
On every pump, the flow rate drops as the pressure increases. At 100 psi and 550 rpm, you would get 9 gpm.
@BJMolette
@BJMolette Жыл бұрын
I'm not getting any pressure on my pump. I just installed it. Do i need to add air into the accumulator? I tried all 4 settings on the unloader. I saw a very slight increase when i was on setting 4. Any ideas,?
@Sprayerdepot
@Sprayerdepot Жыл бұрын
You do need air in the accumulator. You want to put 20 psi or 20% of the normal operating pressure in the dome. It could be that you have your agitation valve wide open and there is an air leak on the suction side or the regulator is bad. If you can email a picture of your sprayer or a short video to info@sprayerdepot.com we can take a look at it and give you more clear guidance.
@BJMolette
@BJMolette Жыл бұрын
@@Sprayerdepot you're a lifesaver. I will send something over today or tomorrow. When you say normal operating pressure, if I plan on using the machine around 200-300 psi . I should inflate it between 40-60 psi?
@rajatmeher6029
@rajatmeher6029 8 ай бұрын
Number bhai
@rajatmeher6029
@rajatmeher6029 8 ай бұрын
Number bhai
Magic trick 🪄😁
00:13
Andrey Grechka
Рет қаралды 26 МЛН
WHO CAN RUN FASTER?
00:23
Zhong
Рет қаралды 15 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 60 МЛН
Pulverizador 200 Lts a gasolina
1:32
Portal da Terra
Рет қаралды 19 М.
Industrial Spray Painting Unit
1:39
Smart Coatings Equipments Pune
Рет қаралды 2,4 М.
Fluent Power - Garden and Water Pump
1:25
Kalasag 911
Рет қаралды 37 М.
Building A Stroker 2JZ-GE VVTI To Handle Over 1000+HP
13:38
REALSTREETPERFORMANCE
Рет қаралды 264 М.
Mills Roofing Gas Pump
6:27
Mills Roofing
Рет қаралды 1,3 М.