How to Overclock RAM (2020 Tutorial) | Introduction of How RAM overclocking works, Tips and Tricks

[@AncientGameplays]

EDIT: Watch the 2021 video here guys - kzbin.info/www/bejne/Zn-5m4ZobKxnjK8 People, sorry for the sound in some parts since i was recording with my smartphone. Hope you enjoy the video, and most of all, hopes this HELPS you all!

[@AncientGameplays]

@Sai Nai yeah, i have a video about that too xD

[@jungtarcph]

Use ryzen d ram calculator and Import the file from Typhoon. You can import it into ryzen d ram calculator. Really do a guide step bt step on d ram calculator. This is not helpful.

[@AncientGameplays]

@@jungtarcph well, dram calculator is not helpful at all too. The timings given are usually not precise in some micron and hynix chips and it will confuse new people a lot. I overclock my ram kits based on this and i have achieved pretty nice results

[@steviedimmu4724]

You helped me understand how this works very specifically how things work and helped me to let go and not worry about silly BS. Thanks my guy!

[@milanklco]

thanks, helped me to sort things out perfectly, great video :)))

[@StarPointy]

Video starts at 7:05

[@Mikigami]

Thanks

[@QbertTehKiller]

you're a fucking hero

[@phong6834]

thanks a lot!

[@AncientGameplays]

You're a hero for knowing how to read the timestamps!

[@StarPointy]

@@AncientGameplays ??? Why are you so toxic? I didn't read the timestamps. I just put this down for people who already know about RAM speeds and timings and wanted to skip that. Sorry, but I'm unsubscribing. You're making assumptions and you're not very nice about it.

[@ourcarry215]

Finally some info that was actually useful. These big KZbin channels on new tech give way too much irreverent information. You hit it right on the money bud!

[@AncientGameplays]

Thanks, some people say the opposite. We can't please everyone

[@gibsonediting4409]

Those sun glasses really give me those matrix vibes 😂

[@AncientGameplays]

Good hahahah

[@ahlmojen2269]

@@AncientGameplays is it possible to overclock cpu, gpu and ram?

[@solaarz]

@@ahlmojen2269 yea but sometimes u cant overclock you're cpu. For example I cant because mine is locked. For intel if its unlocked there is a "k" at the end of the number

[@ahlmojen2269]

@@solaarz im using amd

[@jacobmartinez2570]

@@ahlmojen2269 yes u can overclock amd

[@daniellombardi3670]

My left ear feels lonely

[@AncientGameplays]

Indeed hahaha

[@aaronnn5384]

not how i was expecting this video to start but i’m into it

[@AncientGameplays]

Great!

[@LOOTLORD605]

laughs at your own jokes hahaha,good humor dude love it.

[@AncientGameplays]

I always do

[@aliidress5619]

@@AncientGameplays 😢😂😂😂😂

[@DustinBentley]

What a nice backyard super peaceful except for the neighbor 😂

[@AncientGameplays]

Thanks haha

[@CNDRDRAGON]

Absolutely the best overclockking guide for ram i could find!

[@AncientGameplays]

Thanks!

[@CNDRDRAGON]

@@AncientGameplays I should be thanking you, thanks to you i took my ram from 2133 to 3000mhz with tighter timings and stable clocks, i couldn't even wrap my head around timings and clocks before your tutorial!

[@matthuwu6968]

Great info delivery. Clean editing. Thank you so much and dope glasses

[@AncientGameplays]

Thanks for watching :D

[@andrew-cp5fj]

Nice! I like it. I like how he detail-ly explains this. Thanks! Edit: He also does it in a humorous way! Keep it up bro, you earned a sub from here.

[@AncientGameplays]

Thanks :D You may enjoy some of my other videos

[@immike3476]

Thanks for the help. I overclocked my 4 x 4GB Goodram IRDM Black to 3200 with 1.35V, i know i can lower the voltage a bit but is verry stable now.

[@KhaledAlfaris]

But are the gains from all this lengthy process worth it? I don't think it is! especially when compared to simply applying the xmp overclock.

[@AncientGameplays]

It depends completely on your build. For example, when you get a RAM kit rated 3200MHz CL14, it will most likely do 3800MHz with tightened timings (or more) and that will grant you a very nice boost :D

[@BlakeCodGuy1]

it’s fun to mess with your stuff and know you are using the most out of all components. overclocking everything on a new build is fun as hell

[@flyingmusichaha]

I get the interesting scenario where XMP crashes my stability tests but manual overclocking doesn't.

[@74kross]

@@BlakeCodGuy1 in your opinion to me its tedious

[@xzzyyy4686]

@@flyingmusichahaI think I'm having this issue as well brand new build 10700k Asus Hero XII and Corsair vengeance 3200mhz memory, I enable XMP and I get bluescreens on startup after a few hours of the pc being off super annoying I'm hoping overclocking manually will fix it for me too

[@cgctorrag]

very simply you have the best overclocking advice on the Internet. i've massively increased my real time performance while maintaining life on my hardware. thanks!

[@AncientGameplays]

Thanks for the words

[@Sturridge_FPL]

Instant like for the dog at the start

[@AncientGameplays]

Great haha, rex is a funny dog xD

[@BrapMan]

Best newbie RAM OC video I have seen. Thanks man! (newly subbed due to this vid)

[@AncientGameplays]

Thanks for the words. I think i may have way more videos of your liking

[@abdelrahmanaref8868]

great video and I'm absolutely gonna be messing around with my ram sticks a bit more now, love your dog.

[@AncientGameplays]

Thanks man. Any doubts, comment in this video :D

[@gamesandsoftwares1441]

okay . time to mess with my ram i guess .thx for the video gd job man as always keep them comming . i like the dog btw

[@AncientGameplays]

Thanks for watching one more time hehe

[@Gamen4Bros]

This is very straight forward and fun to watch! Subscribed♥️

[@AncientGameplays]

Thanks for being here :D

[@dpsfitness7375]

Thanks for this you absolute legend. Helped me a lot. Subbed!!!!!!

[@AncientGameplays]

You're welcome. Watch the 2021 version

[@dpsfitness7375]

@@AncientGameplays wait what? Brb lol. Thank you I most certainly will. Really trying to get the best ram I can. I have a 5900x On a ASUS rog x570. Been looking at some patriot viper ram 4133. Thinking of running it at 3600mhz at CL14 14 14 28. Thinking it gives me the room if AMD update the bios at some point to support 4000mhz etc.

[@Twaps666]

These are my bests 15 minutes spent on KZbin!

[@dukeyin1111]

thanks a lot! I am a noob, but I managed to OC my 3200 ram to 3533 Hz after stability tests with 1.39 V. Good for my cheap mobo ryzen set

[@AncientGameplays]

Great to hear :D

[@jodymarty3179]

Yes you are being very understandable. Great video. Very helpful. Great job.

[@AncientGameplays]

Thanks a lot :D

[@goldfries]

Why are people downvoting this video!?!?! My goodness, maybe they couldn't get their RAM to work well.

[@AncientGameplays]

People think there is a magical powder that they use and magnetically their ram gets overclocked and stable

[@bohdanartemenko]

I have the same question

[@felixtag5121]

@@AncientGameplays people are looking for on "how to do it" in a proper way - not some BS talking.... For exampleyou could show them how to use the DRAM caculator and how to make it... not some BLABLABLA.... then your channel will get realy interesting... sorry had to downvote

[@AncientGameplays]

@@felixtag5121 dram calculator is misleading. And the basics steps i said are the ones that should be made. You guys are just to lazy to get that

[@felixtag5121]

@@AncientGameplays i know how to do it - i was more like looking if i find a video where i can determin if a overclock to 4200mhz would be benefical or not on 1440p resolution as there are oposing opinions on this... i work in network security and with hardwarestuff i'm familiar... you should simplly make different videos - some that people would help.... thats the reason why you got so many downvotes... it was just a recommendation that would definitly help you grow.... but a bla bla video is useless... I bet with you when you make a video on this - show the process step by step + plus a test on different resolutions - you would get 5x more view in the the same time peiod than on this video...

[@cigaalmedia9873]

Your still replying to comments 1 year later that's what made me sub KEEP it up my guy

[@AncientGameplays]

Thanks, but watch the 2021 version of this video man. It is improved in some aspects

[@yilmaz8rabi3]

A THANK YOU is not enough for these Great Infos ❤️💙

[@AncientGameplays]

You're welcome. Watch the 2021 version

[@gunslinga5906]

Yooo I thought fps Russia was gonna give me advice on overclocking ram ahahah thanks for the vid dude

[@AncientGameplays]

You're welcome, watch the 2022 version :D

[@gunslinga5906]

@@AncientGameplays gotchu

[@iftekharemon4744]

Thank you for making this video. I'll try following this.

[@AncientGameplays]

Thank you for watching

[@Greek_MotoDivision]

Nice video dude ! ✌✌ i am crying in 11:47 😂😂😂 same thing in my neighborhood !

[@AncientGameplays]

Hehehe

[@sirlurksalot4454]

wow, i really learned some good info, you're pretty smart guy

[@AncientGameplays]

Theres a new video i made last week

[@c0mplex564]

6:22 *Looks at HyperX Fury DDR3 and feels attacked*

[@AncientGameplays]

Hahah

[@kellerak]

the virgin Rex: named "Rex" , scared of chad Fabio's toothbrush, doesn't make noise to not disturb chad Fabio's video shoot the chad Fabio : shoots his videos outside to make a pleasant video for his viewvers , keeping his volume at perfect dB level above his surroundings but still not too high not to avoid neighbours the thad chainsaw guy: doesn't care about anything, not even chad Fabio's video, he didn't even know he had neighbours in the first place the lad bird: doesn't understand the concept of not screaming, peak endurance, probably will scream until it dies the gad coilwhining card: makes you forget about it when you're not playing video games. provides a large spectrum of noises to be sure that it annoys all living beings in existence. adjust to your battle intensity to disturb you as much as possible also good video

[@AncientGameplays]

Hahaha, top notch comment! Haha

[@markuskumpulainen6742]

How do you know so much to computers? Im learning so much for your videos. Thanks!

[@AncientGameplays]

Thanks for watching:D

[@danielchua807]

Awesome mate, i have a question in stability test. How many threads are recommended to run to ensure its really stable?

[@AncientGameplays]

Push it the max you can ofc. There is a better testing software called karhus ram test, but it is paid

[@upaxah]

I don't even knew this, that all the Rams run on oc. Thanks! You can save money with this knowledge! Thanks!!!

[@AncientGameplays]

You're welcome. STILL, the ones that bring more stock OC have usually a better bin and can oc further

[@ryanjack5013]

Appreciate the time stamps on the video, good tutorial bro

[@AncientGameplays]

Thanks man, you're welcome :D

[@elvinpineda1825]

Great content and explanation keep up the good work bro!!.

[@AncientGameplays]

Thanks :D

[@sirlurksalot4454]

When you underclocked it to 3800 what timings did you set yours at?

[@AncientGameplays]

Its Bdie, it also has lots of tuning, my timings wont serve you much

[@sirlurksalot4454]

@@AncientGameplays nevermind II found out that my memory is in fact Hynix I watched your video and got the Thaiphoon as you said, thanks for that info

[@AncientGameplays]

@@sirlurksalot4454 then you will be able to get good frequencies and timings :D

[@kathleendelcourt8136]

About SOC voltage tinkering with Ryzen CPUs, increasing it will also increase the CPU's power consumption and given how the precision boost technology works it will mean that your CPU will boost lower because its maximum boost frequency is tied to consumption and temperature. So if you're increasing your infinity fabric's voltage in order to keep it stable at 1800 or 1900Mhz you should also change the Precision Boost Overdrive settings in order to increase the power limit otherwise you might lose performance despite running your memory controller at a higher frequency. RAM overclocking on Ryzen is a bit more complicated because you must also deal with the Infinity Fabric overclocking. Your Ram might be able to run at 3600Mhz or 3800Mhz but your Infinty Fabric might be unstable at 1800Mhz or 1900Mhz. You absolutely need your IF to match your RAM true frequency (so 1800Mhz for a 3600Mhz DDR4 Kit), if they aren't correctly synchronized you'll lose a lot of performance. There is a good chunk of R5 3600(x) and R7 3700x that won't be able to reach 1900Mhz on the IF and some will even struggle to remain stable at 1800Mhz. I've been quite unlucky with the silicon lottery on my 3700x for instance, getting 1800Mhz stable has been a bitch to tinker. All the memory stress tests seemed to be OK without any errors and yet I was still getting blue screens of death once or twice a day. Turns out it wasn't really the memory but the IF that was unstable. That also means that the super expensive 4000+ Mhz kits aren't meant to run at 4000Mhz on a Ryzen CPU because there's no way your IF will be stable at 2000Mhz, try 3800/1900 (memory/IF) and work on the timings. If even with loose timings it's not stable then the issue is most likely with the IF. In that case lower the Ram and IF frequency again and then tighten the timings in order to compensate the frequency decrease.

[@AncientGameplays]

True, that is why i tell people to watch that video in the description. As for IF it doesn't need to be matched. It is better to, but not a need. 2666mhz with if at 1900MHz will be better than with stock one. Also, if oc is only for 3rg gen. Thanks for the comment

[@kathleendelcourt8136]

@@AncientGameplays You can indeed get a tiny performance increase with a high IF frequency but it only works with slow memory (like 2133 or 2666Mhz). With 3000Mhz memory and above synchronizing the RAM and IF gives much better results. In fact even with slow memory I'd recommend to try to overclock it to 3000Mhz (or better if possible) and synchronize the IF instead of leaving the ram at its stock frequency and crank up the IF. 3000Mhz Ram/1500Mhz IF will most likely mop the floor with a 2133Mhz or 2666 Mhz Ram/1900Mhz IF configuration.

[@AncientGameplays]

@@kathleendelcourt8136 well, i have tge results of that in a video haha

[@kathleendelcourt8136]

@@AncientGameplays I saw that in a Hardware Unboxed video: kzbin.info/www/bejne/n3mWoqSVoririq8 But I have also seen a Linus video showing more substential gains with a desynchronized IF OC so it is actually debatable. Though in general I tend to trust Hardware Unboxed more than Linus.

[@AncientGameplays]

you can trust me xD Here: kzbin.info/www/bejne/l6upipeffZ57pNU

[@jjtb7300]

Some time are bad to have low but all the primary time get them low as you can

[@asafm32]

U cleared everything dude thanks, +1 sub

[@AncientGameplays]

Great to know :D

[@jjtb7300]

Thanks for getting the MHz right

[@AncientGameplays]

💪

[@skintechie]

your dog is running from your toothbrush because to him it probably sounds like a chainsaw.

[@AncientGameplays]

Nahhh, he heard a chainsaw before and he doesn't run. He is now used to it haha

[@FalloenMatrix]

It just Boris !!! Sorry, I couldn't resist ...

[@AncientGameplays]

No problem xD

[@FalloenMatrix]

​@@AncientGameplays And good tips, by the way. You explained them clearly. I´ll encorage myself and try to apply them on my new build (It´s flying in pieces through Europe ritgh now XD).

[@itsmi9525]

Just what i need.. Nice vid..

[@AncientGameplays]

Thanks :D

[@Justdigit2]

Very interesting and learning full... Thanks mate.... Good video.

[@AncientGameplays]

Thanks for watching :D

[@user-rd4sd6bc9v]

so helpful and informative! thanks for making this!!

[@dd84sb]

Awesome! Thank you!

[@AncientGameplays]

Thank you for watching

[@Tampsey]

Amazing video u got a sub

[@AncientGameplays]

Thanks man, i may have more videos of your liking!

[@abimaeldiazakaPicoDee]

great content and to the point. Subbed!

[@JumpRises]

Also worth mentioning on voltage that if you have a asus bios you may need to enable the xm profile. Doing that will auto set your voltage to match the Ram speed you are running.

[@AncientGameplays]

No, that is not what the XMP does lol. The XMP is a complete profile done by the RAM makers...Basically it has a defined voltage to a defined frequency and timings, just that

[@JumpRises]

Ancient Gameplays oh okay thank you I was still new to it.

[@BoxiesAU]

Great informative video, nice work

[@AncientGameplays]

Thanks :D

[@HeyltsKenzi]

Today I learned about computer ram from Brad Pitt :D

[@AncientGameplays]

🤣🤣

[@adamowada]

Great explanation!

[@AncientGameplays]

Thanks!

[@jjtb7300]

Yay you got the manufacture right to

[@AncientGameplays]

💪

[@carterodell2902]

I like this guy more than linus

[@AncientGameplays]

haha, thanks :P

[@beastdud5376]

Imagine going outside

[@AncientGameplays]

xD

[@CmdrTigerKing]

I imagine.. o wait nm.

[@buffyplays2577]

cool video, keep up the great work!

[@AncientGameplays]

Thanks!

[@Visual4uProductions]

Thanks!!

[@AncientGameplays]

You're welcome, STILL, watch the 2021 version which is better done :D

[@michaelskywalker3089]

lol doing an RAM overclocking video, simultaneously managing a toothbrush keys in a door while letting dog in! The simple complexity of life...

[@AncientGameplays]

The perks of simplicity

[@andrestor-me]

What chip is SpecTek manufacturer? I found that on thaiphoon

[@AncientGameplays]

Now that's a good question, never heard of it

[@peterharband326]

Nice puppy!

[@AncientGameplays]

Thanks :D

[@royaltynoob7697]

Got stuck my 🐔 in ceiling fan with this guide.

[@AncientGameplays]

Instructions unclear

[@briandiff1459]

I didnt need Ryzen DRAM Calculator to tell me G.Skill Trident Z Royals F4-3200C16-GTRS are absolute shit sticks, but they will make for a nice $119 set of Christmas lights !

[@AncientGameplays]

loooooool haha. Well, it depedns, for example, some ram kits like the second tam value to be way higher than the other ones (my 2933MHz CL17 ram (hynix AFR) does 3600MHz CL16-22-16-16-36), that second value needs to be 22 for the others to work :D

[@KrowmaxZ]

By the accent i knew where u were from xD Bom video, estava a procura disto.

[@AncientGameplays]

Obrigado hahah

[@labarge88]

I have options for auto voltages after I over clocked the ram. Do you not trust auto settings? And I have a VDDCR soc voltage of .825v should I still be increasing it above 1?

[@fragz6288]

Nice vid!

[@AncientGameplays]

Thanks, watch the 2021 version

[@ali199665]

Thanks bro, now my cheap gaming rig is more powerful -Ryzen 3 3200G @ 3.9 GHz -RX 560 @ 1267 MHz 4 Gb @ 1700 MHz -8 Gb DDR4 @ 2933 MHz

[@AncientGameplays]

Single stick of ram?

[@ali199665]

@@AncientGameplays yep

[@chrisyep]

Can I use Ryzen dram calculator on intel? Great video btw

[@darshanthakkar8492]

Thanks for the video !!!

[@AncientGameplays]

Thanks for watching!

[@darshanthakkar8492]

@@AncientGameplays btw ! U are so funny character.....and u r charming also Keep it up

[@AncientGameplays]

Thanks :D

[@ValMephora]

I have seen so many people increasing their timings in order to get even higher frequencies, so what is better now? Frequency or Timings?

[@AncientGameplays]

I have a video about that mate. Frequency vs latency. Watch it

[@ValMephora]

@@AncientGameplays oh nice, perfect

[@NaterBalls]

first sorry always wanted to say that, nice video as all always

[@AncientGameplays]

THanks haha xD

[@kevcomcreations]

THANKS DUDE

[@AncientGameplays]

Thanks for watching

[@cntryboygeetar]

To the op, curious was your Celeron a 333mhz. I had that bad boy at 500mhz fan cooled with 6 case fans, 600mhz with a soldered personal fridge copper line to CPU hehe. Have a drink and water cooled same time, not sure when water coolers came out but if they was one I didn't know about it.

[@PsYVla]

ok because Iam so new in AMD things I have hyperx Kingston 3000mhz cl15, b450 tomahawk max and r5 3600... ok I see someone says that for gaming fine tune ram memory's increase fps and stable fps... that's why I will ask you: what is the best for beginner like me? 1. just put on xmp profile and good to go; 2. or manual fine tune will get more performance for gaming? and one more: is it best to put on xmp profile 2 3000mhz cl15 and FCLK put on half of my mem speed (1500mhz in my case)? now its on auto... sorry for my English 😔

[@L3MIXX]

Can you please go over your entire bios settings for the ram OC? Asus bios is the most annoying thing I've delt with. Different options appear in settings with the same names. MSI was so much easier to deal with, but that was back in my Intel days

[@AncientGameplays]

I have ASUS and MSI boards and both are pretty easy, just some things in different places. Watch my CPU OC tutorials if you want that

[@L3MIXX]

@@AncientGameplays thanks for the response! I ended up overclocking my CL20 3600mhz to CL16 3600mhz and only touched the main timings and voltage. Tweaking the sub timings didn't allow my Mobo to post for whatever reason on my strix x570-f

[@Darafy_XXVI]

I have 3200Mhz RAM. But my Motherboard stated that my RAM native is 2133Mhz. Should I overclock my RAM just to get that 3200Mhz?

[@ArkenShromAbuser]

I Will try too overclock 😊 i have a corsair rgb pro 3000mhz cl16 😮

[@AncientGameplays]

Go on step by step

[@ArkenShromAbuser]

@@AncientGameplays yeah i will increase the voltage first and bump up the speed first see how high i get :) then flip with the timings like you said :)

[@PixelByte]

Nice Video yes i play mee too 1.45V is pretty safe!

[@AncientGameplays]

Yeap, indeed

[@araaramlbb746]

what test i should run for intel as in ur video u have shown for ryzen

[@pinchevilla4268]

thanks i was just looking into this :)

[@AncientGameplays]

Share of you can :D

[@valerievaysman3993]

i bought a gigabyte b450 aorus pro wifi which does support 3200mhz but only with overclocking. Got corsair vengeance lpx 32gb which has 3200 speed. do i need to actually do something with the bios or will the motherboard automatically support 3200?

[@AnxStudios]

hello fabio. I'm using 1.15V for my soc voltage on a 5600x and b450. Do you think its safe? In this video you said 1.1 at max but after that you said 1.15. I couldnt be sure and i wanted ask. Thank you for your reply in advance.

[@AncientGameplays]

It is, 3rd and 5th gen ryzens like vsoc for higher frequencies. Watch the 2021 version of this video

[@Simmymind360]

Bravo bells Bella

[@AncientGameplays]

Thanks

[@Simmymind360]

@@AncientGameplays I actually got a more stable overclock uping the 3200mhz to 3400 MHz

[@0s0sXD]

What a great great video Thanks dude

[@AncientGameplays]

Thanks you for watching :D

[@sirjxy2332]

Thanks mate

[@swoggo3712]

Thank you for making the video keep going ❤️🔥👍

[@AncientGameplays]

Thanks man :D

[@Huntluck]

What u say about 2× 8gb corsair vengeance pro rgb 3600 cl18 black?? Any comments

[@AncientGameplays]

Seems okay to me...decently fine yeah

[@Huntluck]

@@AncientGameplays ok i returned it back now i got another same model 2x16 gb . What your respective comments

[@VOLTEX-]

My computer already has this memory card so I have 8GB Ram but I want to upgrade it to 16GB, I have to buy a 16GB 2x8 kit or I can buy another 8GB identical to the one I have? please someone help

[@AncientGameplays]

you can get another 8Gb ofc. Use them in slot 2 and 4

[@cyberfield0820]

hi, can you tell me the right timing setting for pc? i am using r7 3700x, aorus elite x570, gskill tridentz rgb 16d 2x8gb 3200mhz. i want to oc my ram to 3600mhz. many thanks before

[@AncientGameplays]

There is no such things as right timing. All ram kits are different mate

[@cyberfield0820]

@@AncientGameplays ok. many thanks

[@demetriomrtz]

Pc newbie here. Ive been getting unstable memory (black screen upon boot up or random restarts when i get into OS) when I set the XMP to get my 3600mhz speed i bought (Corsair Vengeance PRO 16gb 3600c18) I set it back to the default 2133mhz for my fear of breaking something. Any advice? I have a Ryzen 7 3700x with stock cooler.

[@AncientGameplays]

wel, the video actually tells you what do mate...But voltage to 1.4v should be enough

[@demetriomrtz]

Ancient Gameplays I know I’m sorry I just wanted to be sure, do I have to move the voltage on the cpu as well like the video says or is that just for manual oc? Like I said I am very paranoid of destroying my parts this is my first pc.

[@AncientGameplays]

@@demetriomrtz ram voltage..not cpu voltage

[@demetriomrtz]

Ancient Gameplays I am referring to the soc voltage you mentioned, or is that on the ram too? Sorry I am a noob

[@AncientGameplays]

@@demetriomrtz soc voltage is for infinity fabric, not cpu only hehe

[@VENO5407]

Should I turn XMP II off when manually overclocking RAM?

[@AncientGameplays]

You can use both np

[@eulbko]

Rip I oced and set my dram voltage at 1.45v and set the frequency up only 200 from 3000 to 3200mhz and still not stable... Would lowering the voltage help or do I need to change the SOC voltage?

[@AncientGameplays]

You need to change timings also

[@brunoproenca2199]

És um deus. Obrigadão. Continua com o bom trabalho. Tenho uma dúvida, posso fazer overclock a memória até quantos mhz, tenho 2x8gb corsair vanguance 2400mhz. Tenho um ryzen 3 2200g.

[@AncientGameplays]

Boas, como vês no video, não da para saber. Pode dar muito como pouco...depende da sorte

[@bubbles7581]

Obrigado!😃

[@VashishthaTerekar24]

I have a gskill 8gb 2400mhz ram stick, base speed is 2133mhz. How much voltage should i go to ? And is it necessary that with overclocking ram we should overclock cpu too ?

[@AncientGameplays]

Watch the video mate. The video is the answer

[@philm2054]

I have the Corsair 3600Mhz pro rgb CL18 kit. At stock frequency (3600Mhz) should I be able to hit CL16 timing numbers?

[@AncientGameplays]

Well, it is hard to know, butr you shall try and see. That is how it works :D

[@rzfszn]

Is this dangerous? I mean ik all overclocks are dangerous but, what are the risks? Oh and how likely too? Also how to tell if the ram is stable?

[@AncientGameplays]

Hey hey, watch the 2021 version. Is better detailed

[@rzfszn]

wow i didnt think you would reply since this vid is like a year old, thank you though, your content is good and you now have a sub from me!

[@bluey9335]

When the sunnies came off, im getting a baked vibe?

[@hellomehellome1170]

Sir i have a Question, my PSU is lc-8600btx 600w (yeah a generic one and it is with me for 5 years, and run find with my current pc) Specification Cpu: Ryzen 5 3400G GPU: Vega 11 RAM: Ramsta 2666 8gb( planning to upgrade to 2×8 3200 Darkza ram, thank you Ancient Gameplay for advices) MoBo: MSI A320m-A pro( they said it locked which is true but according to box it can oc to 3200mhz) And now im thinking will my psu be enough to oc my ram if i buy the 3200mhz ram? Thanks for the help, btw your video is great, it contain all the information i need on how to oc ram, bu my problen is psu, is this fine?

[@BaptVideoMarketer]

Hello , when i do what you say , i just up to 3200 to 3266 and tis' not stable , how it is possible ? I only change the voltage of the soc and the dram