This is all well and good for large boxes which are mostly the same size, but try with almost 500 boxes of varying sizes. I just started a warehouse job and am loading orders with 480 boxes of completely different sizes and it is bloody hard work to form a neat stack - ESPECIALLY WITHIN THE ALLOTTED TIME!!!!
@brenndolacerda35769 жыл бұрын
i got a job on the line but they come off all different sizes tough to keep the pallett even when the sizes come off the line so randomly
@darrellluton62275 жыл бұрын
I dont know how to stack a box I have never work before but I'm going to apply on Monday
@kokoajay55407 жыл бұрын
Huge boxes are OK for putting on a pallet is OK .but what about little boxes medium boxes large boxes. how do I make them fit . do a video on that
@scottspangrud48358 жыл бұрын
What about packing the odd size & shaped boxes. Not all boxes will be the same size. Show how you would pack a pallet that included boxes with the approx following dimensions: 3" X 5" x 12", 4" x 8" x 32", & 12" x 15" x 15". All these boxes have varying weights, and they're not unloaded from the truck in any particular order? And you have to be fast.
@MidNiteR327 жыл бұрын
I worked as an unloader at a big store once upon a time. Stacking different size boxes is a skill that you'll eventually get better at with time. So patience is the key. Here are some tips to follow: 1. Try to build a wall first. A common mistake people do is start stacking the entire pallet first instead of the back side. Build a steady wall first then start coming towards the front of the pallet. You'll run out of room fast if you just stack every corner of the pallet before you get a wall going, trust me. Stop once you reach a certain height, anything higher than 7 1/2 feet I find to be not very stable, and may need to be wrapped depending on the stack. Cross tie each wall with each other for stability. 2. Use the entire space of a pallet. Another common rookie mistake is leaving a gap at the end of every pallet. Always fill the pallet no matter the size of the box, and ONLY leave a gap in between boxes if the box isn't long enough, that way you can fit small slim boxes in between each stack. This may sound confusing considering what I said in my previous point, but it isn't the same thing. 3. Cheat to get an even stack. Do whatever you can to get an even stack. That means turning, flipping a box upside down when you aren't supposed to. The boxes I found to be a pain in the ass to stack are small liquid shampoo boxes. Do what you can to get a flat even surface. Follow basic physics: Heavy bottom, medium heavy middle, light or very light, top. This may not always work out depending on how fast your are unloading with various boxes coming out of the truck, but its still basic rule to follow. Never try to use a light box as a base, unless the box is very sturdy or big enough that it can withhold to stand weight above its own. Try to also not overhang your top stacks with your bottom base, meaning try not to make your top stack bigger wider than your base. 4. Cross tie everything When you get a flat even stack on the entire pallet, cross tie it. Think of an even stack as another empty pallet, just go the opposite way so the stack gets some stability. I hope this helps.
@user-cs6bg4zp5q3 жыл бұрын
@@MidNiteR32 kzbin.info/www/bejne/hJ6mdISui6eZr68
@UnpackGuyPage3 жыл бұрын
Do you have a calculator, how to pack various size boxes on a pallet. I just dimension of boxes so it tells me which boxes to place where.
@tiezalb88518 жыл бұрын
He did a horrible job on wrapping how can they not notice I make my pallets perfection
@leodavies93835 жыл бұрын
i been doing this job for 3 month and it feels so long and boring
@judybarcenas5304 жыл бұрын
This guy at work palletizes the box's with a 8 inch gap in every other tier to fit the pallet and he has the nerve to tell me I have to learn how to palletizes.
@youfuzhang39036 жыл бұрын
Iu
@pc7935 жыл бұрын
This video is bullshit, different sizes, all at once and no time to waste. Pallets fill up and then you are screwed. Fired!