How to pair a Crosby Straightpoint Loadcell to a Handheld Plus

[@rangadad]

Hi, do you need to do a similar process for pairing with the SW-BS? Do I need to unpair the handheld as well? I have the SW-BS connected to a GL240 data logger with a 250ohm shunt resistor to convert the amp signal into volts, but it's not giving us anything when a load is applied. We have checked all the wiring and all the input and output power levels and it all seems ok. The input voltage is 12V DC, the signal is showing 10V, and with the shunt the voltage across the signal wires is 4V, but no variance (and we expected close to 1V (given the signal is 4-20mA). All I can think of is that the SW-BS isn't connected to the Radio link plus load cell (12te). Please help!

[@sukeshshivakumar2015]

One of my Loadcell display shows "NO REF" is it because of low battery or does it needs to be given for servicing?

[@crosbyrigging]

Please contact [e-mail] they will be able to help you with this error, thank you.

[@galihgunadi1377]

How to change us customary unit to metrics...

[@crosbyrigging]

Please contact our sales team, [e-mail] they will be able to talk you through this.

[@ilufix1]

Thank you!