Sir How many papers i have to write for 32page booklet Can you tell me sir I have dout in JntuH
@dattasaicharanyadavvempala35233 жыл бұрын
Sir Please Provide The Guidance About JNTUA Ananthapur R20 Regulation C.S.E Branch to pass in semester sir semester date also released please make a video about How to pass r20 external exam sir
@jdhanushabai89974 жыл бұрын
Tqq sir..
@msaikiran92374 жыл бұрын
Sir please tell for Network theory exam
@pradeepthulluru92664 жыл бұрын
Thanks
@nagellamahesh89074 жыл бұрын
SIR HOW TO PASS EXTERNAL IN C-LANGUAGE AND DATA STRUCTURES ( C&D's )
@EngineeringDrive4 жыл бұрын
I will upload the video in 3-4 days.
@BFAOVinay3 жыл бұрын
@@EngineeringDrive I want video link
@nanit36003 жыл бұрын
@sathish kumar bro I was failed cds
@HadithsOfProphetMuhammad3 жыл бұрын
amazing content
@srikanth-sf3ng3 жыл бұрын
Thank you sir... One small request... can you please provide M. Tech Advanced Manufacturing System in JNTUA Previous Question Papers link so that I can download it. Thank you sir.
@harshareddystarreddy57043 жыл бұрын
Super sir 🤝🤝
@sudheerkumarneelam28065 жыл бұрын
Thanks sir
@rajvelde13474 жыл бұрын
What is stick pens sir ?
@PPmohan-xv9xk2 жыл бұрын
Thankyou sir for the information you have given to us it's very helpful but sir i need video about how to score good marks in cpds subject if there any video can share link to me sir
@ANagaHarshitha Жыл бұрын
Sir can we use colour pens in external examination ???
@Moon_Shade134 жыл бұрын
sir what should we do if we dont know 2 marks questions?
@sivakumariakula62113 жыл бұрын
Sir iam r19 regulation student i have completed my b.tech 1st year without fail but second year is doubt sir
@usershiva154 Жыл бұрын
Sir I have One Big Doubt You have said always mention question no on left side of margin but paper correction is going online and offline Correction if online correction was done cutting will occur on left side one faculty said mention question no on inside or middle said can i mention question number on right side margin without any problem please reply sir i have supply exams on this week please Give Me One And only your valuable suggestions.....
@danilkumar20075 жыл бұрын
Thanks sir ......
@gorlasaipavan3152 Жыл бұрын
Sir in this video u told when u know 2 questions perfectly write them 1st perfectly it's ok but u can't explain what we do after write those 2 questions how attempt reaming questions
@Nikhith_Nick Жыл бұрын
Sir what about autoumus colleges if we follow these points can we pass?
@sivagoud73352 жыл бұрын
Sir examiniro know the regulation of students?
@moulalisingh7152 Жыл бұрын
Sir I have 26 marks in external in one 4-1 supple subject but I got only 10 marks in internals on that subject. So, I want to apply for recounting on that subject I want only 5 more marks in external to pass that exam. So, tell me in recounting, can 5 marks increase in external on that subject or not please tell me please sir
@omaralbar91493 жыл бұрын
How I study programming e.g c++ using video tutorial? Thanks a lot.
@naseerkhan75072 жыл бұрын
Please sir make a vedio on gate exam
@geetikarao105 жыл бұрын
Sir how to pass in one day 2 exams (mrng nd afternoon) in R13 regulation
@EngineeringDrive5 жыл бұрын
Before both the exams, You need to prepare atleast for half day each subject. Atleast you must have a one day gap before the exams.
@skfiroz50054 жыл бұрын
Me2 still facing thz situation 😭😭🙏🙏
@saisripathi48613 жыл бұрын
Day by day exams are there sir how to manage and how to pass
@raghavabtechusa52184 жыл бұрын
Best video in my life sir
@navyasincrediblefacts60053 жыл бұрын
Today afternoon I have exams sir.... 😭😭... I didn't read 📖...
@Thasneem27934 жыл бұрын
Sir i have 1 backlog I am 2018 passed out if I want leave subject..... Is it possible to leave 1 Or 2 subjects and take all certificates for r13 regulation please answer me it is important
@EngineeringDrive4 жыл бұрын
Mostly, it is Possible. Anyhow, you once Contact your college Exam Section for Confirmation.
@lifelongcmysjaganreddy46423 жыл бұрын
I had no about it
@somesulaanusha7613 жыл бұрын
How to complete m4 and emtl sub in supply exm please give me ur suggestions sir
@romanticram99774 жыл бұрын
How to pass m1 subject make one video on that
@fouziashaik87363 жыл бұрын
Good mrng sir I should thank you for boosting up of our confidence levels ,sir could u plzz help me to get pass the network analysis sub r15 sir
@mogilivenkatrao90313 жыл бұрын
Sir writing in booklet to draw marigens correct or no inexternal exams give reply sir please
@EngineeringDrive3 жыл бұрын
Yes, you can draw Margins.
@BChRamya4 жыл бұрын
Sir I have an problem I forgot even I work hard so that I failed so how to pass sir
@anucreationsandanuarts99062 жыл бұрын
Sir exam ki obsent aiethy marks reduce chestharu jntua lo please reply me sir
@worldofmeditation62982 жыл бұрын
No
@ajayveluvg59523 жыл бұрын
Is mtech also same sir
@venkatlevaku84473 жыл бұрын
Sir timemaintains in exam hall one video...pls
@EngineeringDrive3 жыл бұрын
Sure
@rohith182 жыл бұрын
Sir can we use glitters for side headings??
@EngineeringDrive2 жыл бұрын
Yes, you can
@rohith182 жыл бұрын
@@EngineeringDrive thanks for letting me know ❤️
@RAKESHKUMAR-wy6hb4 жыл бұрын
Thank u so much sir!!! Is there any videos related,How to pass Engineering math -1 Exam??
@EngineeringDrive4 жыл бұрын
Yeah, You can watch my Video, it will be helpful. kzbin.info/www/bejne/enjMhZ-sq7RqbcU
@bhupathisurendrababu9791 Жыл бұрын
👌
@maheshharry70394 жыл бұрын
Sir I am a r13 student and I got 17 marks(m1) on recent held exam which is my only backlog can I apply for grace marks to pass this subject.
@EngineeringDrive4 жыл бұрын
No, the concept of Grace marks is applicable only for overall percentage not for individual subject. Anyhow you consult your Department once before taking any further action.
@maheshharry70394 жыл бұрын
Engineering Drive sir actually JNTUH and JNTUK officially accepting this 8marks which is common 0.15% of grace marks exception then why not for JNTUA
@EngineeringDrive4 жыл бұрын
It depends on them, they will change their rules at any time.
@EngineeringDrive4 жыл бұрын
@@maheshharry7039 Even JNTUA will also consider but it depends on the Regulations also.
@shaikirfan85454 жыл бұрын
Grace marks vunnaya r-15 jntua ki
@amritsahu46963 жыл бұрын
Sir, if we know one question and that question didn't came in exam and if we write that answer in the script, can we expect atleast some marks from that answer Or not???
@alinowaz62444 жыл бұрын
Sir in last semeister exam .how to check paper .
@fazilshaik60284 жыл бұрын
Sir i have absent for external supplementary exam is there negative marking
@EngineeringDrive4 жыл бұрын
No Negative Marking.
@ashishreddy35174 жыл бұрын
Sir my writing is very bad i always leave a line between each can i do in that way
@EngineeringDrive3 жыл бұрын
No, don't leave lines.
@guruganeshreddy9964 жыл бұрын
Sir in my clg faculty said don't use stick pen in jntua examination is it true. 🤔
@EngineeringDrive4 жыл бұрын
No problem, you can use Stick pens for Side headings or for Underline purpose. It will create a Good impression for you. Except Green & Red, you can use any Color.
@thatisaikrishna89874 жыл бұрын
Thank you sir
@NethraShetty-fc4ll3 жыл бұрын
Sir good evening I am pursuing MBA sir I have doubt on pass markes..sir out of 60/ how many marks required to pass for out of 60
@Rhythmic_Reels12 жыл бұрын
Hlo 27
@534chenchurani34 жыл бұрын
How to study software engineering subject in simple way
@maanasadevi12364 жыл бұрын
Revise regularly sub heading , remember diagrams put diagrams , read 2 books and make diagrams .
@le309sareddymahendrareddy42 жыл бұрын
How to pass cad/cam SIR R15
@tejaa9935 жыл бұрын
Sir what are the minimum pass marks for mba external exams plz tell me sir
@safdarghaani88174 жыл бұрын
Sir I'm R09 student can i have chance to right exams? It's 2020 many year after can i have a chance to right exams
@EngineeringDrive4 жыл бұрын
A student can have a chance to write exams only upto 8 years of B. Tech from Admitted year.
@salmashaik96324 жыл бұрын
As salamalakum hi bro
@salmashaik96324 жыл бұрын
@@EngineeringDrive sir any chance R09 dis yer
@safdarghaani88174 жыл бұрын
@@EngineeringDrive I'm 2011 to 2015 pass out batch
@safdarghaani88174 жыл бұрын
@@salmashaik9632 waalikum salam sis
@nanit36003 жыл бұрын
Sir,is applying recounting is ok for jntua?
@EngineeringDrive3 жыл бұрын
Better not to Apply. Mostly no use.
@moulalisingh70872 жыл бұрын
sir give me one video of how to pass in jntua external exams r15 regulation btech signals and systems subject sir. sir send me one video of this subject sir.please sir.
@moulalisingh70872 жыл бұрын
give me reply sir.
@Gurudevi2343 жыл бұрын
Sir please tell me how to get 90 above percentage in btech 1st sem🤔
@jyothicgowda15254 жыл бұрын
Sir how to pass c, m2, drawing, na plz tell sir
@EngineeringDrive4 жыл бұрын
I will upload the Videos in 3-4 days.
@raviteja68985 жыл бұрын
how much time for correction of one paper in jntu A sir
@EngineeringDrive5 жыл бұрын
The correction time differs from person to person but on average each paper will be corrected in less than 3 minutes.
@samudralashanmukrao21854 жыл бұрын
@@EngineeringDrive 🙊🙊🙊🙊
@saikiran70884 жыл бұрын
Nbkrist autonomous nellore examination nellore tips autonomous passed College a. pvideis
@pavansamrat43304 жыл бұрын
Sir I am Mtech r17 regulation student I don't have intetnal marks how do I prepare to get 40 marks I must get 40 out of 60 marks
@EngineeringDrive4 жыл бұрын
I know it will be Tough Task but you need much more Hard work and some Tips to clear your External Exam. Remember Patience is the Key.
@geetikarao105 жыл бұрын
Sir how to pass in M1 nd drawing exams in R13 regulation
@EngineeringDrive5 жыл бұрын
I will prepare a video on that shortly.
@zahir78214 жыл бұрын
M1 and Drawing are Easy
@butharajumahesh23013 жыл бұрын
Sir can I write essay questions first and can be write color pen in jntua exam ?
@EngineeringDrive3 жыл бұрын
Yeah
@sreeramroyal4764 жыл бұрын
Sir I don't have any internal marks ,then how to clear my subjects sir NO Internal marks
@EngineeringDrive4 жыл бұрын
No problem, then only option is to work hard to get those extra marks in Final Exams. It is possible. Don't lose hope, you will get Success.
@BFAOVinay3 жыл бұрын
R19 minimum pass marks how much
@fazilshaik60284 жыл бұрын
Sir pls 🙏 tell
@EngineeringDrive4 жыл бұрын
No Negative Marks for External Exams.
@harisha2754 жыл бұрын
Sir unfortunately I skipped my mid exams 3 subjects. Those internal marks is 0 . any possible to get back my internal Mark's
@EngineeringDrive4 жыл бұрын
No, you need to get those extra marks in External Exams.
@GaneshKumar-oj1df4 жыл бұрын
I want jntua text book similar to r15 regulation
@sekharroyal10054 жыл бұрын
Sir Actually one small doubt For r09 JNTUA m.tech Total Mark's score ❓
@EngineeringDrive4 жыл бұрын
Internal : 40 Marks. External : 60 Marks. Minimum Pass marks in Internal: 26 Minimum Pass marks in External: 24 Minimum Total Pass Marks: 50 out of 100.
@sekharroyal10054 жыл бұрын
@@EngineeringDrive Total score ❓ 670 or 700
@sekharroyal10054 жыл бұрын
That too Computer science and engineering
@Obi8883 жыл бұрын
sir plese how to pass drawing sir
@EngineeringDrive3 жыл бұрын
kzbin.info/aero/PL5Rc9H5eTGY6dSEI3HM83Hh1ZAfBrUBWM Already, many videos are available related to Exams in my channel, you can watch it from the above link.