How To Pass The General Contractor License Exam THE FIRST TIME!!

[@chadanderson4264]

I’ve been a residential appraiser for 17 years and decided to try this route. I took my first two practice test modules (carpentry and concrete) and got a 61%. It’s really hard material for someone that has never worked in construction. Going to regroup and try again tomorrow on these practice tests.

[@BuiltByBaileys]

Yes it is very difficult to take this test without any field experience. This test and the ensuing licensure is the next step in the advancement of a person’s career in home building. I have people ask me all the time how they can pass this test when they have no experience in construction. The answer is you really can’t. If for some reason someone is able to pass this test with no experience at all, how are they going to have the knowledge to build? Not possible

[@RapperEddieGTheHitMaker]

You taught the perfect way not only to pass the contractors test but also any test. Thanks for the video

[@BuiltByBaileys]

Nice work!!

[@davedoes1298]

Just passed my ICC G13 exam today (first time around). The vid definitely gave me a bit more direction on how to study. Extra emphasis on understanding of how to use the book (I had some reasonable experience from school while studying structural engineering). Main sections used were wood framing, planning, administration, and oddly foundation reinforcement. Also, extra emphasis on knowing what the question is asking in regards to section. Also in CO, so this was cool to hear from a local.

[@BuiltByBaileys]

Nice work and glad the video helped!!! You should be proud of yourself for passing it the first time. Many more rewards are headed your way!!

[@davedoes1298]

@@BuiltByBaileys I appreciate it! Maybe it's been addressed in your other videos, but how do I go about adding licenses for other jurisdictions? I'll be getting my first license for jeffco, but I'd also like to be able to work in Douglass county, elbert county, and el Paso county.

[@BuiltByBaileys]

@@davedoes1298 you will need to fill out an application for each building department you would like to get licensed in, and each department has different obligations. You will also need to get set up with the correct general liability insurance as almost all of them require insurance. Make a spreadsheet to keep track of all of your licenses as they will all expire at different times, and you really don't want them to lapse.

[@humbertopulido8757]

I need help I already took my remodeling license b2 new license pass my law and business easy try my trade 3 time was short 3 percent dobyou have any pointers I got 64 percent 3 times need 67 any pointers will be helpful

[@foxgdsmck]

Nice! I'm looking to get mine to segway from corporate pm'ing, to running my own business now. Any guidance on the book; where I can get it, and the correct one with peace of mind?

[@murray1505]

In AZ, removable tabs are NOT permitted. And we are currently testing IRC 2018...

[@BuiltByBaileys]

as are we

[@cassandrafoss7299]

Minnesota doesn't allow tabbing book or writing in book

[@jorgepena68]

Just wanted to say thank you for the 101 info. I greatly appreciate it.

[@BuiltByBaileys]

For sure! Thanks for watching!

[@paulnowak542]

Passing the Contractor exam is when you study hard, if you can’t study or you don't have time for your studies l'd advise you get yourself a help like Mr Willard

[@lukerollins7792]

Yes you're correct but remember heaven helps those who help themselves, try studying if you can't study then get yourself a good help

[@stevemasongrey2461]

I studied for months and couldn't pass, I guess passing is a blessing

[@DanielRodriguez-mx8bh]

Contractor exam might seem so tough to pass but studying very hard is a very vital skill to win trust me

[@pamelaparker3463]

Everyone has their own way, Willard worked for me and studying didn't

[@marryhernandez8515]

I've taken the exam for the 4th time and yet I failed, I really studied hard enough each time, please I need Mr Willard info😫

[@nobleroofinggeneralcontrac7961]

I had a Mass 00 non restricted supers license (highest) for over 30 years. Moved to Kc they would not reciprocate. I took that class A at least 6 times and failed. I ended getting my C. I am going at it again. I am a contractor because I was never good at school and books. Thanks for the tips but I already did all these great tips.

[@samcorlsamuel9074]

Please don’t say that about yourself. You do not become a contractor because you did not fare well at school. You because a contractor to provide and offer your skills and work with integrity and honesty. I am a physician and i have a license. My passion is to built quality homes. Good luck to you.

[@dilonprice3648]

@@samcorlsamuel9074fr it takes alot of brains to build

[@jesusaguilar958]

In california is different you can no bring anything just your license they provide you everything

[@liers99]

In TN we can’t use post it’s to tab they have to be permanent tabs. Also we can only highlight and underline in the books. We can’t write anything. I appreciate the tidbit about guessing on a question and coming back. I’m guessing a lot of the people that fail don’t finish the test.

[@BuiltByBaileys]

Yes you can only highlight in the book and any notes have to be in there before you walk into the testing centers. They thoroughly check the book before you go into the testing room as well

[@g-ray7019]

Do we have to buy a lot of books to take the test. I’ve heard they are expensive

[@TanyaRadic]

Not in PSI you can't write in ink in the book NO, you have to have preprinted tabs. NO post it notes allowed.

[@BuiltByBaileys]

Correct you cannot write in the book. Post it notes cannot have anything written on them either

[@sincerelysakura8071]

For anyone taking this exam outside of CO, make sure to check the book requirements before writing in it. In MS we can't write in thev book, only tabs.

[@BuiltByBaileys]

Always check testing requirements before signing up

[@Colin_17]

I’m in LA studying for mine. Did you pass?

[@sincerelysakura8071]

@@Colin_17 took about a month off after passing the MS business and law exam. I've gone through 4.5 of 9 books so far for the residential builder exam. Hoping to take the exam by the end of the month or so and have my license by Christmas.

[@contrarianthinker]

@@sincerelysakura8071where did you get your books from and exactly what books do I need to

[@93adie]

That intro beat hard!

[@jeffhike688]

I just took my c-13 they didn’t let me take anything in I had to use there calculator on the computer and there notepad I was stressful doin general next

[@d.baileyspeaks]

I’m a licensed real estate broker and usmc veteran. Ready to get my GC license. Been putting it off for years.

[@BuiltByBaileys]

How are you ready to get your license? Have you worked for a builder? Do you have construction experience?

[@ericdanieltrejo]

@@BuiltByBaileysI am also a real estate broker at 22 years old with honestly little to no building experience. I feel very confident on passing exams if I take a class or study. Any advice for completely new people? I am located in North Carolina. Thanks!

[@brianlanford8054]

Is there any way I could contact you personally? I am in a bind my building was hit by a car. And we’re a couple of months from starting to build and I cannot find a contractor that is not trying to rake me over the coals. I have been a builder for twenty years just never been licensed.

[@jeancharlesgerald3937]

Hi I’m Gerald I really appreciate the way you present the show. Do you sell books for the exam

[@BuiltByBaileys]

No but plenty of options at icc.org

[@KJfreshh69]

As you say “ you should already know that”… I’m over here trying to learn anything about it. I know nothing, I may know something but no videos are explaining down to what it’s really like. Like do I need to know extended math equations, know and be able to do concrete, electrical, framing… like do it all myself? Wish I could just be sidekick to someone who’s willing ti teach me

[@BuiltByBaileys]

No, you need to work for a builder. This is not a "learn on the internet" profession

[@michaellutz1954]

@@BuiltByBaileysso what field of work should I look into working in to learn this the most

[@BuiltByBaileys]

@@michaellutz1954 framing or construction management

[@nrsservicegroup8390]

I am a civil engineer graduated in Brazil, I have masters and my green card process is about my professional career. More then ten years working with residential construction in large scale, big condos wiht diferents types of layout, buildens and houses. So my question is, I have no background in US working wiht constructions, and I've thinking about to take the GC license in MN state, wiht no background in US, I will got make it?

[@BuiltByBaileys]

You will need construction experience. Obtaining a GC license is not strictly about knowledge of structure but about all the building trades and real world building experience from the ground up. I would suggest getting an internship or job with a local builder and being hands on. Best way to understand all the codes and trades/assemblies

[@charlesw.polanco6775]

Thanks. You explanation was very good bb

[@X3rtified_kicks]

Would you recommend get the 2018 IRC 2018 or IRC 2021?

[@BuiltByBaileys]

I would say get the 2021 as most building departments will be rolling over to it very soon if they have not already

[@X3rtified_kicks]

@@BuiltByBaileys ok thank you and another question do you recommend taking the course or just studying the book ?

[@lulm4br220]

@@X3rtified_kicks did you take the course or study the test?

[@podunk87]

Thanks for the video. You said, multiple times, that you should already know a lot of this information. Is there a resource where I can learn all of this information?

[@BuiltByBaileys]

The information that I discuss people already knowing is based in work in the field and on job sites. It seems a lot of people are looking to get their GC license without actually working for a builder or in construction at all. It is inpossible to pass this test without real world building experience, and in many states you cannot get a license without work experience

[@subjob]

after you passed. Is it worth it? Did it increase your pay?

[@BuiltByBaileys]

In order for me to start my own business and build homes I had to be licensed. In most states if you are not licensed you cannot pull permits of any kind, and therefore cannot build or remodel homes. It was imperative, and in almost all states that is the case

[@turboskywalker9108]

Great info thank you

[@Woke84]

Great info !

[@andrearaujo7684]

I only have the IRC 2021 edition, when I go to see the books in the practice course none of the options use the 2021 edition, Is that a problem or can I just use the 21 edition with no problem?

[@BuiltByBaileys]

some sections are a little different but depending on what the testing center is using it might not be that big of a deal. If it is older than the 2018 edition for the test it might be a little tougher to scale through the book or find some info as it has been re organized since 2015 a fair amount. You could find a book for the specific test, but if you are really familiar with the IRC you should be fine.

[@cedricfuqua487]

Do you have a video on tagging the book?

[@BuiltByBaileys]

What do you mean by tagging the book?

[@cedricfuqua487]

@@BuiltByBaileys I would like to know exactly what you tagged in your book.

[@BuiltByBaileys]

@@cedricfuqua487 different sections that are used frequently in the field and on the test. Most specifically the load tables and span tables for the most common lumber species and build models. Section 300 should be fsirly well memorized but you can add post its there and sections with span tables to find them quickly. It helps in the field for quick reference as well

[@manuelungaro3994]

Very good , nice and clear , for some reason took me to your site, I want to take the Florida GC test, do you have any links to recommend me, thank you

[@BuiltByBaileys]

Go to iccsafe.org and then click on Professional Development and then Assessment. You can then select exams. You can also go here www.testprepreview.com/modules/contractor.htm for some practice exams and there are some in the description

[@dahanadelc.rojasgonzalez9746]

Hello I have the Nascla book to study for the test. It’s works? Please let me know

[@jillsmith-y1h]

Thank you, this video helped me so much.

[@asmakhalid2356]

I'm in Mississauga. which college (preferably online) can I attend to pass this exam.

[@BuiltByBaileys]

Lots of community colleges offer trade programs, but look for Construction Management degrees offered at colleges to help. You will still need field experience in construction in order to successfully pass and get licensed

[@juancontreras7865]

Im new to ur Chanel im juan contreras and im going to do the test gb2 building residential and i have the book 2024 what Page would you recomend to study for the test

[@GOMADandSquats]

good to know, we should already know...

[@julietarios6130]

I need California General Building B book for my husband, where do we buy it?.

[@BuiltByBaileys]

You can find most on Amazon or at iccsafe.org

[@jesse20241]

Hi , the link you mentioned under practice test in description box doesn’t have the 2021 bundle . Please suggest where can I find the 2021 prep bundle from the contractor training website. thanks

[@JenniferRoos-cf2mm]

Is the ICC F13 exam still based on the 2015 code book?

[@BuiltByBaileys]

No most testing centers are now on the 2018 and about to go to 2021

[@mccadesims3086]

where are the links for the practice tests??

[@BuiltByBaileys]

In the description below. Thanks for watching

[@taylorruss5904]

Online it says I can only use NASCLAs Contractor Guide. Am I looking in the right place? This is for Tennessee.

[@Vanya-jq8dd]

Do you have to show proof of tax filed in the last few years?

[@MariaRivas-q4d]

Thank you this was very helpful

[@BuiltByBaileys]

Glad it was helpful!

[@tektonwooddesign3390]

Do you find where you need to improve if you fail or do you just keep studying until you pass it?

[@BuiltByBaileys]

Unfortunately they do not give you a breakdown of each section, just a pass or fail. Never hurts to ask the testing center for extra information after your test however

[@skysardello]

would the general residential contractor class c be the correct certification for residential excavation company? I'm finding that to be the ICC G13?

[@jaken9528]

I am looking for the book 2021-2023! I still can’t find it

[@BuiltByBaileys]

Newest one out is the IRC 2021. They are on Amazon for sure

[@jesse20241]

I heard books on Amazon is coming form India and china and they have missing pages and they are not original copies . Can you please let us know from where you bought your book

[@jesse20241]

@@BuiltByBaileysplease advise

[@jesse20241]

On Pearson vue I see 2018 test available. I cannot find 2021 test available. Can you please help

[@Estella0707]

Best advice!!!

[@dedmonhomerepairfencing875]

Amazing video man

[@BlitDesign]

i was trying to register my exam center on PSI websiite is asking for NCCO ID NUMBER or NASCLA ID NUMBER to create account, please how do i get NCCO ID NUMBER OR NASCLA ID NUMBER to create account to register for an exam center

[@wildylozandier3757]

Does this information apply to the state test in Florida?

[@BuiltByBaileys]

check with local guidelines but the ICC test is nationwide content. Your certification is based on ICC guidelines. Local municipalities will have different licensure requirements but the ICC is the same for all

[@wildylozandier3757]

Thanks alot!

[@jerryfayaz6736]

U guys have any notes?

[@MrRozay1]

i need practice tests! I go in for exam the 27th !

[@BuiltByBaileys]

www.testprepreview.com/modules/contractor.htm Try here

[@jesse20241]

Did you pass ? Please share your experience

[@MrRozay1]

@@jesse20241 next test lol 🤣 I will be going back in a couple months tho. I was a 68% 2% off

[@jesse20241]

@@MrRozay1did the practice test be of any help ? Also did you study the 2018 or 2021 version of IRC?

[@Vendetta_Armada80]

I'm getting the general contractor license and a plumbing license

[@bradelpers8143]

I think i have that same calculator from the late 80s.

[@diytacoma5758]

I'm taking notes

[@celeste8230]

We have the 2021 books will this work for the F12 contractor B test Colorado?

[@BuiltByBaileys]

Check with the testing center you are going to use. Most are still on 2018 but will convert to 2021 soon

[@BlitDesign]

question is this IRC book is for all states or for only the state of colorado

[@4twenty3]

I am very curious how much it costs financially buying the books to study and take the test.

[@BuiltByBaileys]

The 2021 IRC book is around $150. Test fees can vary depending on what state you live in, but on average will cost about $175.

[@juarezcustombuilds]

Some of the pre test questions say to reference the concrete manual, you don't mention this book. Should we get it, trying in texas

[@BuiltByBaileys]

Understand foundations and flat work, and that is also in the ICC book

[@permaguard3166]

I just want to build small backyard storage sheds and this is what I have to go through?

[@BuiltByBaileys]

Depends on where you live

[@theSaltyCarpenter]

I almost passed my MA Unrestricted CSL only by 3 questions my first time...I've been kicking myself every day, taking it my 2nd time tomorrow!

[@BuiltByBaileys]

You got this!!!

[@theSaltyCarpenter]

@BuiltByBaileys I live on Martha's vineyard, the boats broke down. Couldn't make it to test facility.

[@theSaltyCarpenter]

@@BuiltByBaileys didn't pass by 1!!!!! Ughhh next time

[@BuiltByBaileys]

@@theSaltyCarpenter stay with it. Keep your head up. You WILL get it done💪🏻💪🏻💪🏻💪🏻

[@Boogra]

Is the info in the video still relevant?

[@rosier.5953]

I understand that for California the test is not an open book or they're not allowed to bring anything at all. Does anyone know different for California? Please share if you do. Thank you.

[@BuiltByBaileys]

as far as I know it is open book, you just will have the book examined to make sure nothing has been added to it

[@ryanDemeble]

how do i check what book their on? i live in michigan by the way

[@BuiltByBaileys]

That is what I stated at the beginning of the video LOL. iccsafe.org

[@emoesdg4850]

I’m studying for the B-3 ( R61) does this apply

[@BuiltByBaileys]

The ICC tests are broken into classes of A, B and C. The one you are referring to is a classification of a carpenter and limited remodeling contractor, in which most states don't require any sort of license for, but of course check with local licensure as they might require a local test. This is not an ICC certification however. Why are you looking to classify under this one? Why not take the Class C Residential contractor test for the ICC?

[@krisgehrholz9817]

Thanks!

[@BuiltByBaileys]

No problem!

[@paulinaramirez5849]

Hello, just subscribed to your channel just by looking at the comments! I am a 23 year old girl trying to pass this test in AZ. I have failed twice :( any tips?

[@BuiltByBaileys]

Welcome to the channel! Wow! 23! Love it!!! Get very familiar with the IRC book as far as layout, sections, and how to search codes in the book quickly. What background do you have in construction? Understanding structure, especially wood framing, is pretty essential. Take as many practice tests as possible. And don't forget to breath during the test. Passing it the first or second time is pretty difficult, but you will get it.

[@paulinaramirez5849]

@@BuiltByBaileys Yes 23! I have been studying since January and I'm a bit lost on how to find the codes quickly in the book. After watching your video I got a better idea of how to.

[@kikanmuffin]

Im in AZ too! I just got my IRC and NASCLA books. I plan on taking the test in the near future! I’m having trouble getting to know what’s really important and worth highlighting. Tabbing not so much. Anyways, Thanks for the advice and good luck o passing the test!

[@elchepe2120]

@@kikanmuffin heey Paulina am from AZ you Instagram ??? I Can contact with you guys have some questions idk you guys can help me

[@raymundojimenez9693]

Thank you

[@BuiltByBaileys]

You're welcome

[@jacobsonleland]

What is cost of the ICC Book? how much does it cost to test?

[@BuiltByBaileys]

check Amazon for best pricing. Test fees will vary. Link in the description

[@tinoslaponi8514]

why not just get the IRC in PDF format and CTRL F; to search for the test answers?

[@BuiltByBaileys]

uhhhh... you have to take the test at a testing center

[@alansalazar712]

Can you basically pass the exam with this book alone and prior knowledge?? Or is this one of the main books??

[@DirtyBanditable]

I took the IRC in 2011, failed the first time. But I was also testing for an additional jurisdiction and failed to read the fine print of going to a website and printing off their additional code pages. I failed by 1 question, and I am pretty certain I missed ALL the "additional code questions" dealing with load tables in a higher elevation. I had just ended my career in law enforcement, so I already had a fine-tuned ability to look up information under pressure, practically a superpower. Check with your local Building Dept, they will let you know what code books are needed for specific licenses.

[@fliporhold]

Can you download the PDF version to your laptop and take the laptop?

[@BuiltByBaileys]

No

[@jarrydee2799]

I can't find any info on what to study for my Michigan electrical contractors test. I just passed my masters ( which you must have to get the contractors) and there is no info out there on what to study. I know it is just a bunch of laws, but thats it

[@BuiltByBaileys]

If you passed your master electrical exam then you would just take that info to your building departments or the state licensing center (if Michigan is state. I assume it is) and they will take that and your money LOL and give you your contractor license. Your master's test dictates your level. The license is a separate piece of paper that allows you to operate at that level. You should be able to get your master's license issued with that proof of pass. Congrats!

[@murray1505]

Please add that your video is specific to Colorado...much of what you said in this video does not apply to AZ exam

[@benjarda3958]

I'm also from AZ. Did you end up taking it? If so, how did you do

[@TanyaRadic]

They wouldn't let me use post it notes for tabs

[@veryfriendlyok]

I need to remove all the post it flags for pages?

[@BuiltByBaileys]

call the testing center and ask them

[@zacheverett5066]

You work out of Bailey colorado?

[@BuiltByBaileys]

Not generally. Bailey is my last name. Mostly front range but we are building a spec shipping container home in Como, CO

[@zacheverett5066]

I am building in Como as well, just submitted for my house permit last week

[@BuiltByBaileys]

@@zacheverett5066 Good luck. It takes quite a while to get reviewed in Park County. We just got our permits yesterday

[@jasminegrewal5041]

Hi I'm a realtor and I want to be a residential general contractor plz help

[@jasminegrewal5041]

I'm from California

[@BuiltByBaileys]

What is your experience in the construction and home building world? California is a state license for GCs

[@jasminegrewal5041]

@@BuiltByBaileys I'm a citizen

[@jasminegrewal5041]

@@BuiltByBaileys I did Bachelor's in Architecture from India

[@BuiltByBaileys]

@@jasminegrewal5041 go work for a general contractor. Look for companies that are wanting to hire project managers. You need to learn the building codes and the trades. Understanding MEPs and structural is most important. Also make sure you get a 2021 IRC book as well and start studying it

[@ElvisPerezOG]

I’m also located in Denver 80249, any chance I may be able to pick your brain on the testing or county requirements? Contemplating on starting licensing in Denver. Thanks for the video.

[@BuiltByBaileys]

DM me at @builtbybaileys on IG

[@patrickgreen5893]

thanks a lot

[@rohangreen8425]

I would like to get my licenses for that.!! Please help me.??? I'm will to get it.!!

[@BuiltByBaileys]

Locate a local builder and get your experience as fast as you can. Check requirements for licensure within your state to understand how much experience you will need and other requirements once you pass the ICC test

[@humbertopulido8757]

Am in California paid school pass only law business failed the remodeling b2 license 3 times I study the basic books this school give you but failed short 3 times 64 need it 67 any books can help me I never herd ICC books icr books if iam right any guidance will be great thank you.

[@BuiltByBaileys]

ICC is the International Code Council and the governing body for building. You will need to take one of those Class tests and pass in order to apply for any license

[@BuiltByBaileys]

Links in the description for books and study guides

[@Madinka-asmr]

Hi Humbert. Did you pass B2 exam trade part in CAli? On may 31 I'll go to exam and I would like to ask few questions.

[@JB-ej2qy]

I love the idea of a test, I’ve seen so many stupid builders or wannabes. I’ve seen police officers on duty building, realtors, landscapers, stay at home moms, etc… Its insane.

[@BuiltByBaileys]

Not in CO. We are required to be licensed

[@ThuskiPhuski]

Hi, is this exam valid for ontario, Canada ?

[@BuiltByBaileys]

ICC would be for both, but testing requirements could be different in Canada

[@NashvillePastaman]

I’m gonna take your advice and get tested….. and if your info is as good as i think it is….. I’ll send on a super chat !!!

[@joserodriguez-ww2kt]

In where can i buy this book sr

[@BuiltByBaileys]

Amazon is your best bet

[@veryfriendlyok]

I need the B1, anything for that

[@BuiltByBaileys]

same scenario, and should be test info for B license at ICC as well. You can email them for more information on practice tests as well

[@aubriehale4157]

Michigan is closed book

[@RookAndRavenServices]

“I’d rather be lucky than good.”

[@BuiltByBaileys]

no thanks LOL

[@bocamax]

Your math is off because the percentages you gave total 104%. I checked it twice.

[@BuiltByBaileys]

its 100% but I see where you got confused. I talked about a section twice. Those numbers are straight off iccsafe.org

[@toadamine]

The scratch paper has to have no writing but it's OK to have written notes in the book? That doesn't make a lot of sense lol... if you were cheating like that, just write the answers in the book instead of the notepad🤷‍♂️😆

[@BuiltByBaileys]

Scratch paper is provided at the testing center.

[@larryphillips4164]

Isn’t that amazing that we can take a book and a calculator that the test is based upon into the testing session with us and then when we get out into the real world we will most likely never see that book/calculator again and yet you can’t take your phone with you into the test session but yet when you get out into the real world 99.99999% of the time you will keep your phone with you and refer to the phone/internet for answers/suggestions. Maybe it’s time to rethink how we take test and rethink what we are really being tested on/for. If you can’t do basic math then guess what, in the real world we have calculators. If you can’t think of a basic OSHA standard then guess what, the internet has that answer and if the internet and or phone is down like in an apocalyptic scenario then WE ARENT WORRIED ABOUT A FUCKING OSHA RULE/STANDARD!!! WE WILL JUST BE TRYING TO SURVIVE!!!

[@BuiltByBaileys]

If you are doing your job you will reference this book all the time. And the calculator as well. Get a construction calculator. I work in areas that don't even have cell service, like certain mountain locations. Always room for paper. I think it is the opposite. We rely WAYYYYY too heavily on phones. Be careful there

[@billybat5790]

I passed both my tests the first time in cali after studying for a month. It is challenging and they only give you one 5 min pee break.

[@PennyTe]

What year IRC? Also what main things should i consider studing?

[@billybat5790]

​@@PennyTe i took a study program with lectures and tests. there's so many random questions i suggest getting good at deductive reasoning. biggest help was finishing and tagging the hard ones for later & going back like the video said. GOOD LUCK

[@PennyTe]

🙏🏽. I appreciate your response so much you're great 😃

[@RonnaElise]

What study program did you use for California? Thanks

[@BuiltByBaileys]

I am in CO

[@DTSupstateNY]

What a great sales pitch.. “hey you need this book! For the rest of your companies life” “okay cool np “ “but we’re going to change a few words and you need to buy another one every couple years or your ducked!! Lmao

[@vikataufa4612]

*testing on the book but not testing on the book… got it

[@BuiltByBaileys]

its open book, but you still need to understand what you are being tested on. You only have 4 hours to finish the test. Open book tests do not mean you do not need to study or no ZERO of the material ahead of time.

[@MarkoLA-wi2zq]

So you should pretty much already know everything before you even think of taking this test is what I got

[@o.profit7831]

Why not mention the word "Colorado" in your title or the Subject?? Duh!

[@BuiltByBaileys]

Why?

[@ApollosGreed79]

​@BuiltByBaileys He was looking for information specific for his State I guess. Though goodle is probably a better resource to find that information...

[@stumpbumpers]

This is not relevant for NASCLA or North Carolina.