How to Plot Degradation data in origin | Degradation data Interpretation | All about Degradation |

Hi
Welcome to Science and analysis.
In this video, you will learn the data plotting of any kind of Degradation data in origin and its interpretation through the C/C0 curve and its manipulation to first-order rate kinetics then you will learn its fitting in first-order rate kinetics...
you will also learn, how to do linear fitting in origin, how to put formulas in origin.
you also learn the decoration of any graph in origin for submitting to any publication house.
Most important, in this video you are going to learn, How to export an origin graph.
kzbin.info/www/bejne/gpyVpnR9ZtCXqLs
kzbin.info/door/sch1pGuvFsQTQ-3JIh2a8Q
#Degradationdataploting
#Degradationdatainterpretation
We are continuously working hard to provide you with the best knowledge about the software used to plot and analyze the data in Research.
Thank you for watching this video.
Please share this video if you Like and subscribe to this channel.
please subscribe to our other channel that provides math and chemistry education to school-level students...
#CarrierStriveAcademy
You should also visit
NanoMatWorld for more such videos
if you want to relax you can watch some natural views by subscribing our channel free of cost
BharatiyaPanorama
photocatalysis
photocatalytic degradation of dyes
degradation data plotting
degradation data analysis
first order rate kinetics
pseudo first order rate constant
fitting of data in origin
origin data plotting
basics of photocatalysis
basics of origin
how to plot data in origin
photocatalysis for dye degradation
photocatalytic degradation of dyes
pollution
pollutant degradation
pollutant degradation mechanism
how to analysis degradation data
how to export origin graph
curve fitting in origin
best data fitting for publication
NanoMatworld
#Carrier strive academy
NanoMat world
#How to plot Degradation data in origin
#Dataploting in origin
#Data decoration in origin
#Data interpretation in origin
#C/C0 curve calculations
#first order kinetic rate fitting in origin
#firstorderratekineticfittings
#Data decoration
#datadecoration
#decoration of data in origin

[@nidakhan8376]

Its really amazing..I was so confused before this and begging for help to learn the setting of graphs..you made it easy for us..thank you so much sir

[@lalitasharma7303]

You thought in so good manner...please upload more such informative videos

[@ScienceAnalysis]

Thanks for the compliment

[@mamunurrashid4877]

I am from Bangladesh. It is very helpful video

[@ScienceAnalysis]

Thank you....and glad it works for you..

[@R4Kaushik]

very nice

[@ScienceAnalysis]

So nice

[@akshaykumarboltey]

Nice

[@chetnamadaan7530]

Hi Sir, Thank you a lot for making such informative video. Apki sari video informative h

[@rajukaushik7314]

very nicely understood

[@ScienceAnalysis]

Glad, it works for you

[@shalu2insta]

Hi, good explanation. Can you tell me what is control jn your case because in dye experiments 0 minute reading is that reading where no catalyst is been added. I have this doubt kindly explain.

[@ScienceAnalysis]

Control is the reading that is having no catalyst, After that is was stirred with catalyst to perform the adsorption. After adsorption the reading named is 0 min. That is just before the light on.

[@shalu2insta]

@@ScienceAnalysis Thanku

[@ScienceAnalysis]

Welcome

[@RabbanKhan-so1bj]

thank you for uploading this content

[@ScienceAnalysis]

Our pleasure!

[@surajitghosh6619]

i am not getting the peak at same wavelength for each degradation curve. So what should i do? Should i have to find the peak at each curve manually and take the corresponding absorption value ? or should i take the particular wavelength peak at which molar absorptivity of my material is measured?

[@ScienceAnalysis]

How much it changed ?? Does it changes regularly for each time point ?? You also check the pH changes during the reaction

[@ashithakishore7389]

May I know whether you are taking the absorbance value as concentration in C/Co plot or are you conducting any calibration of the dye solution before the experiments and calculating the respective concentration based on the absorbance you obtained from this....

[@ScienceAnalysis]

You have to make a calibration curve for accurate and precise results. However for the first glance you can take initial concentration as C0.

[@sureshkumarsundaravel9674]

Sir, Very informative!!, Please add subtitle in English. So that it would be easy for every one to understand clearly.

[@ScienceAnalysis]

Ok next time

[@ali-rf5iy]

Helpful video

[@pankjain25]

Very Nice explanations. Bravo

[@ScienceAnalysis]

Many thanks!

[@nicheaaja-zi8cl]

beautifully explained

[@ScienceAnalysis]

Thanks for liking

[@bairavbitesseries6796]

Easy to understand ur explanation

[@ScienceAnalysis]

Thank you

[@bairavbitesseries6796]

Along with data sheet, if u share it will be very useful sir

[@rananoman8239]

At a.u should we write scale number on y axis

[@ScienceAnalysis]

You should....it's upto the person bro..

[@aneebafatima8184]

Hi Great video, can you please share this data sheet of origin with us please! So Thank full to you!

[@ScienceAnalysis]

How I can share it

[@shaswatvikramgupta]

Excellent 👏👏👏

[@ScienceAnalysis]

Thank you! Cheers!

[@dineshthakur9017]

Bhagwaan apko khus rkhe

[@user-wu5de5qh2x]

Thanks sir you explained it very well

[@ScienceAnalysis]

Most welcome

[@shalinie-learning]

If R square value is less than 0.95 or not near to 1 then what type of kinetic order is this

[@ScienceAnalysis]

You have to check it again with other order rate kinetics fitting

[@ahmedmalik9974]

Kitna axha log hain na ap log

[@syedhaider3854]

if R (square) is around 74, what will be order of reaction? Thanks, waiting your response.

[@ScienceAnalysis]

Hi, R2 does not define the order of the reaction. It is just a parameter to define your fitting quality. As you are fitting your values that were calculated by using first or 2nd or 3rd order reaction rate equation, this parameter will only tell you that the fitting is perfect or not..

[@syedhaider3854]

thanks@@ScienceAnalysis

[@ScienceAnalysis]

Welcome

[@deys4492]

Well explained.. It helped me really.. Thank you

[@ScienceAnalysis]

Thank you...

[@mdborhanuddin8295]

Thank you sir, can you give me this data, I want to practice it.

[@ScienceAnalysis]

This is very old one. But I will provide some similar data set, if you want

[@D19-h4z]

Nicely explained

[@ScienceAnalysis]

Thank you 🙂

[@joninigam7429]

I can't understand the basic principle of the photocatalytic degradation mechanism. Actually, I am working on TiO2 based photocatalytic systems for pollutant degradation. Can you please some videos on this topic. It would be a great help from your side to researchers in this field. I think I already commented on some of your videos. Please have a look at this matter.

[@ScienceAnalysis]

Hi Joni, thanks for commenting. I really appreciate that you are interested in photocatalysis, and sure I will make some videos on this topic soon...

[@muhammadyasar3213]

Respected Sir, can we calculate the First order /Sceond Order without determining the slope?

[@ScienceAnalysis]

Dear Yasar, there are many other ways that can be used to check whether the reaction Is 1st/2nd order. 1. You can plot the graph between remaining concentration of pollutant and reaction time, by observing it's nature you will identify the order. 2. You can check the corelation between different half life's....it will also suggest the order..

[@yutube-bx8dv]

no

[@IbrahimAkram-h8d]

Sir, how can we get this 0min spectra. can you please tell me?

[@ScienceAnalysis]

Why not

[@ScienceAnalysis]

I will be happy to discuss

[@IbrahimAkram-h8d]

Please explain

[@ScienceAnalysis]

Are you doing photocatalysis??

[@Joansteen]

Iam not getting these curves from the data you provided pls help me

[@ScienceAnalysis]

Hi bro, please tell me how can I help you

[@Joansteen]

@@ScienceAnalysis sir the data which you were using in wavelength vs absorbance graph that i copied from you tube to excel an pasted on origin pro to get the same curves but i am not getting those curves instead of that i am getting slopy lines

[@NS-my1hb]

Sir agr R2 ki value 0.4 aye th phr knsa order fit hoga plz us k lye b bta dn

[@ScienceAnalysis]

Bhai, R2 ki value 0.4 ka matlb hua....Jo bhi order aap fit kr rhe ho vo uss order m fit nhi hoga.... Try with 0 or 2nd order rate law

[@NS-my1hb]

@@ScienceAnalysis g tu baqi order b apply krna sekha dn zero or second plz

[@PakistanMycountry-l6r]

Very informative

[@ScienceAnalysis]

Glad it was helpful!

[@NS-my1hb]

Baqi kinetics order ksy fit hn gy wo bta dn plz

[@ScienceAnalysis]

Bhai, explain kro...kya poochna chahte h aap

[@NS-my1hb]

Mn ny pocha h k agr hm ny second order apply krna ho tu ksy krn gy

[@NS-my1hb]

Mtlb agr R2 k value 0.4 h tu order fit n ho rha firsr tu 2nd order or zero order ksy apply krn gy plz wo b bta dy

[@arishfakhan4091]

Sir iski percentage ka kaise pta chaly ga

[@ScienceAnalysis]

Bhai, C/C0 ko...100 se multiply krke

[@arishfakhan4091]

@@ScienceAnalysis sir laga k daikha ha par naii arhii percentage

[@ScienceAnalysis]

M bta dunga bhai

[@ScienceAnalysis]

Aap exactly btao....kya issue aa rha h

[@MatNano]

very nice

[@ScienceAnalysis]

Thanks bro

[@godstimekuna3108]

Nice