How to Prepare And Install a holley High Ram intake Manifold in My LS Swap Sonoma. Turbo is in the works Like, Share and Subscribe. Turbo video coming soon. DIY and things you may need for install.
Пікірлер: 80
@JoseLopez-qe4lt2 ай бұрын
How did you installed the map sensor ?
@MIC-LS2 ай бұрын
Map sensor is installed in the back of the Holley Hi Ram, there are vacuum holes available in the back, and one in particular to mount Map Sensor.
@JesseJamesYT3 жыл бұрын
This is gonna be sick, I'm about to start on a 5.3 swap on my 85 s10. Never done it before so its nice to have stuff like this to watch.
@MrSoulstealer13 жыл бұрын
Same man, except i have a 98. I want to turbo LS swap mine seems like ALOT of work lol 😂 but it would be worth it 💯
@adriangonzales47352 жыл бұрын
Howd the swap go?
@Businessecomm.Ai15 ай бұрын
4in cowl hood?
@MIC-LS5 ай бұрын
It is only a 3" cowl
@Businessecomm.Ai15 ай бұрын
@MIC-LS ok 👍 just curious because I'm thinking about getting that but mid ram intake instead of the hi ram intake for my 2nd gen ranger also has a 6in cowl hood
@irvingbar45692 жыл бұрын
Thanks for taking the time to make a great step by step video 👍
@kerrylemoine39433 жыл бұрын
Wow! It is changing the landscape, lol! Almost like GMC SYSCLONE, except AWD. Can't wait to see more channels! Keep up the great work
@MIC-LS3 жыл бұрын
Thank you for the compliment.
@kerrylemoine39433 жыл бұрын
You're welcome
@PabloHernandez-uo2xg5 ай бұрын
I love how you didn’t even show the vacuum hose bolts
@MIC-LS5 ай бұрын
Lol, didn't have bolts, lol.
@removeableskull74463 жыл бұрын
Hey if you put some washers on the hood mounting bolts you might be able to get the clearance at the top of the throttle body
@MIC-LS3 жыл бұрын
I will look into that.
@rollingvictor29892 жыл бұрын
Fuel pressure regulator part number?
@mikemellina3022 Жыл бұрын
Was the vasoline menthol.. 😂 just kidding bro great video !!
@MIC-LS Жыл бұрын
Lol, I did not smell it, Next time I'll use Vicks Vapor rub that one for sure has menthol.
@stevensautomotiveexperience3 жыл бұрын
Nice! Looks pretty serious!
@MIC-LS3 жыл бұрын
Thank you, Dude.
@jamesdesherlia8953 жыл бұрын
Awesome vid keep it up excited to see this turbo setup!
@MIC-LS3 жыл бұрын
Glad to hear, thanks Man.
@dmykoleflims9021 Жыл бұрын
Thank you, I'm in the process of doing some performance upgrades to my 1st Gen Ls. I was doing some research on the hi ram. Which lead me to your KZbin page, what throttle body do you recommend for this hi ram
@MIC-LS Жыл бұрын
I recommend whichever 92MM you want, I am doing a turbo.
@allenmessmer25083 жыл бұрын
I bet it has MSD coils on it now.
@fisherfn.6161 Жыл бұрын
What’s the part number to those injectors
@MIC-LS Жыл бұрын
Got them from Amazon when this video was made, Part # 0280150558. Hope they still sell them.
@ls7gaptizer100 Жыл бұрын
What kind of heads do you run
@AnthonyLsx5.311 ай бұрын
Question. What did u use for the fuel rail crossover having a bit trouble with fitment because of the alternator (02 silverado 5.3) same intake
@MIC-LS11 ай бұрын
I used -6 AN lines, the Holley fuel rails are set up for -8 AN lines, I just got 90 degrees fittings adapter from -8 AN adapt to -6AN. Holley fuel rails have provisions to feed front or rear. No issues with alternator.
@AnthonyLsx5.311 ай бұрын
@@MIC-LS thank you for the reply! Im going to try that 90 degree fitting👍🏾
What the part number to the intake when you ordered it
@MIC-LS2 жыл бұрын
300-122 Holley 300-122 - Holley EFI LS Hi-Ram Intake Manifolds ( 7 ) Part Number: HLY-300-122 This intake part number is for cathedral port heads, is what I have. Thank you for watching.
@Itsolivera2 жыл бұрын
Installed the intake on my 6.0 , cable does not reach the throttle body , any suggestions?
@MIC-LS2 жыл бұрын
www.ebay.com/itm/313179039150?hash=item48eaece5ae:g:e6gAAOSwS15fMf3L&amdata=enc%3AAQAHAAAA8CGKFKjqAWDb4HQs24D1MFhv%2FGLb04PhSbtumXAzDeToXubbEosUlJEdqO3Byt%2BmYfvuz3yjiWfSCza9CR%2Bs4NpnUMJSMkRR%2FtEb02WY%2B8F%2F9U6RSYaJKQrcNogDyINiQyDNO8LxHnDtUOQWL1yN%2B763BZAfDKKdyEwGgMOjziQUyy%2FEHbLVMHlUvoW8YSF1ijAWvDrxL0CwT2JYZw%2Fc8Yh7QBgyzaK07Z9sSBP67uNezbj%2BLfa%2BalyR4DpWkXOF90fSU8eCfYCcgrKSJRvt9eMmddg23EIr7j28c0wvGiE28CF5501ERoqkAIhA6LVDQA%3D%3D%7Ctkp%3ABFBMvMK_8Npg9 I would go this route.
@irvingbar45692 жыл бұрын
So do you plug one side of the rail with a 8an straight port plug
@MIC-LS2 жыл бұрын
No, 2 inputs to fuel regulator on back side, regulator in front, 1 output to tank.
@jadrinue80852 жыл бұрын
Clean
@opngarage87772 жыл бұрын
great vid man!! what size is the socket used for the small 12 point bolts that hold the two parts of the intake together?
@MIC-LS2 жыл бұрын
I belive is an E-Torx #7
@MIC-LS2 жыл бұрын
Size I belive was an E-Torx socket #7
@angelmxntoya2 жыл бұрын
Are the injectors good? I’m in need of EV-1 Style injectors and these look good for now. Any feedback about them is good. thank you
@MIC-LS2 жыл бұрын
I have not had time to test them yet. I am adding a turbo, piping, oil lines etc. Once I run it I will mention the injectors and how they run. Stay tuned.
@Itsolivera2 жыл бұрын
Injector part numbers ?
@MIC-LS2 жыл бұрын
www.amazon.com/Fuel-Injectors-Engines-440cc-Mustang/dp/B07B9Y3X65/ref=mp_s_a_1_5?crid=1SYP4124WD1PY&keywords=ls+fuel+injectors+bosch&qid=1638282088&sprefix=ls+fuel+injectors+bosch%2Caps%2C189&sr=8-5# ( There you Go Bud)
@asifaman96933 жыл бұрын
Brother, can i put holley intake manifold in 2015 sierra 5.3.. Please someone guide me on this
@MIC-LS3 жыл бұрын
Yes you can, find out if your intake is square port or cathedral port.
@removeableskull74463 жыл бұрын
I like it keep it up man
@MIC-LS3 жыл бұрын
Thanks Man!!
@chidozperformance5560 Жыл бұрын
how much are injectors an are they from amazon or ebay
@MIC-LS Жыл бұрын
2 years ago set of 8 LS1 injectors were $280 on ebay now they may be way more due to inflation.
@jsperformance29822 жыл бұрын
What injectors are those
@MIC-LS2 жыл бұрын
They are Bosch style for 98 Chevy camaro LS1.
@skippmitchellbuilds94932 жыл бұрын
Where did yu get the an fittings for the fuel rails from?
@MIC-LS2 жыл бұрын
Ebay bought a 6AN hose fuel regulator/ fittings assortment kit for $70. You can also purchase them separately average price $6--$12.
@skippmitchellbuilds94932 жыл бұрын
@@MIC-LS thank yu
@Mr.MyLifeOnWheels3 жыл бұрын
What radiator did you use and did you do any changes to the rear-end?
@MIC-LS3 жыл бұрын
I used an ebay LS swaped 3 row all aluminum inlet and outlet on passenger side. As far as the rear end from the T5 back is all stock. Future plans are for an awesome rear end and better transmission. Little by little especially going turbo, I know that will need some attention.
@paulburkey22 жыл бұрын
your running a turbo on that T5 or did you switch to the TKX T5?
@MIC-LS2 жыл бұрын
Thanks for the comment, I have not switched to the TKX T5, I understand it is a weak link. It is a stock T5 for now and I may switch to an automatic once I go drag racing full-time. I am open to suggestions.
@paulburkey22 жыл бұрын
@@MIC-LS switch it out for the TKX 5 speed good for 600 ft/lb of torque anything higher then that you'll have problems hooking up that power to the ground unless you're planning on building a full-on drag racer
@MIC-LS2 жыл бұрын
@@paulburkey2 Thanks man! I'll definitely look into it.
@removeableskull74463 жыл бұрын
Hey man you ok ?you haven’t posted any new vids in a while
@MIC-LS3 жыл бұрын
Soon, change of schedule at work, plus just received essential parts for my turbo build. Not to mention EPA had me worried for a bit but rest assured. Videos coming soon.
@removeableskull74463 жыл бұрын
@@MIC-LS glad your ok and take you time on the vids did the rpm act win against the epa?
@removeableskull74463 жыл бұрын
Oh ya back in the day I had longer bolts and washer on my hood to vent more air out of the engine bay that might help with clearance of the intake