I ran out of fuel while sleeping , and used this video just now in real time after fueling . I primed the pump for 10 minutes after fueling , and boom the reefer came back to life . This video saved my job , thank you for this !!!!!
@tomlind2 Жыл бұрын
It doesn't take that long if you crack open the red bleeder screw that he completely ignored. Most fuel tanks on refers have a Schroeder valve on top of the tank, crack open that bleeder and blow some air in the tank, it'll fire right up!
@miami4103 ай бұрын
Here is the video that just saved my a**I have 10000 pounds of fresh frozen cannabis in a refrigeratra.And did not realize how to properly prime my pump , thank you for this
@Madcracka3 ай бұрын
Do we have to open up the bleeder valve as we're priming?
@JoshOnutaOffical3 жыл бұрын
Why isn’t he cracking open the bleed bolt
@robh4672 жыл бұрын
Right....and I learned it has an air plug on the top of tank. A simple blow and you stop, by then you see fuel shooting out the front of trailer.
@grimreaper7864 Жыл бұрын
He is a dummy that's why haha jk jk it took me like 1min really
@matthewdeevaughn2582 жыл бұрын
Squirt some air in the tank crack the bleeder bolt till just fuel sprays out then start it
@katriceriche39582 жыл бұрын
How
@miltonlgordon38413 ай бұрын
Thank you 👍👍👍👍
@able_trucking7803 жыл бұрын
You will be there 1year pumping that little plunger.
@j.m.5995 Жыл бұрын
I always just apply a vacuum pump on the return line
@chadcaldwell3823 Жыл бұрын
Little start fluid fire right up I got 45 units I take care of works every time 1 to 2 min it's going
@123nme1 Жыл бұрын
Where do you spray it ?
@chadcaldwell3823 Жыл бұрын
@@123nme1 below air cleaner should be rubber hose thete or remove lid to spray on air cleaner not to much just little
@MRNPOETS1484 ай бұрын
@@chadcaldwell3823where is air cleaner
@orlandoanderson6673 жыл бұрын
Good knowledge
@mikebomlb79732 жыл бұрын
so how does a man get in on reefer repair do i have to go to diesel college if anyone can answer and let me know
@anthonypica7922 жыл бұрын
Look into thermoking. Not sure where ur at but I’m a master tech for them
@robh4672 жыл бұрын
Drive for five years and by then you'll learn a lot
@markm0000 Жыл бұрын
Go to a dealer and be willing to learn and not get paid for it. Buy as many quality tools as you can and always ask for help then take notes. Study study study every single day non stop.
@rmtv47093 жыл бұрын
All unit are Carrier.? For me tk is better than carrier friendly for repairing mechanic and elertrical regarding carrier display module its better to upgrade more than the old one ist not good visibility specially in day time.
@victorgguerrero18292 жыл бұрын
You missing the red bottom!
@Gummybear598614 ай бұрын
Cant hear anything
@Slw75112 жыл бұрын
what about air in fuel line?
@Nihilianth Жыл бұрын
That's why you gotta prime it. To get air out of the fuel line, so that fuel gets into the fuel filter.
@Slw7511 Жыл бұрын
@@Nihilianth To bleed air, loosen the red button.
@FMT480 Жыл бұрын
He didn’t read the directions😂
@Yatusabez Жыл бұрын
Definitely add some 911 treatment to fuel if your going to be driving in freezing conditions!
@markm0000 Жыл бұрын
911 is only for after fuel has gelled. Do not use it regularly it will destroy the high pressure fuel system as it reduces lubrication. Use the grey bottle that says antigel and you should be good. For very low temps double the dosage.