How to program a Somfy RTS motor in less than 5 minutes

[@CatalystMachine]

Otto. Man, thank you, thank you. Whoever designed this system had no concept of their user base. After watching three of you very clear videos, I was able to reset the limits on my two shades. Each required the 3-8-3 second power cycle reset, followed by the remote sequence you describe. There is no way I would have been able to do it without you.

[@wakelfool]

This video is awesome! It saved me having to buy a new blind for $$$. Thank you so much.

[@adoric_official]

Thanks!

[@motoriseit]

Thank you for the tip - much appreciated!

[@hmb30492]

شكراً سيد أووتو شرحك واضح وسهل اتباعه 😇 Thanks Mr. Otto very easy instruction to follow and helpfully

[@lancelotdugaduga4676]

Now I learn how to program sumfy remote...thanks your video.

[@trindfusz]

Awesome and thorough instructions! Thank you

[@jonathansanantonio2402]

Thanks mate, you saved me a lot of time.

[@ClassierAct]

You are a lifesaver! Thank you very much.

[@uweberger2456]

Very helpful, thank you! 😊

[@dionvolschenk6103]

Thank you. Clear, helpfull & to the point!

[@kevinguilfoyle6832]

Very helpful, many thanks Otto

[@Superkev001]

Perfect, saved me, thanks

[@Ranbhere]

I have two blinds operating from one remote with 4 channels. All was working well but something happened and I had to reset the limits. Now the 5 channel when both blinds operate together does not work I've tried to program this to reprogram the channel. The blinds are battery operated

[@motoriseit]

Hi Ranbhere, when you reset the motor, you need to re-create the group channel, as that channel isn't created automatically. So if channel 1 operates blind one, press prog until the motor responds (jogs), next, go to channel 5 and press prog again. the blind will jog and you can now operate blind 1 with channel 1 and 5. Wait 5 minutes and repeat the procedure for the next channel and start with the channel you want to add to the group channel. Here's a video that shows this procedure: kzbin.info/www/bejne/g4PWg6B6gtxjbLs good luck, otto

[@anthonypeck9082]

Nice clear instructions….nice not to hear “ whats up guys” at the start of the video 🙄…..thank you