How to program and wire W3230 temperature controller

[@tonyglevum1084]

Thank you for curing my frustration with setting this device. the instructions that came with this was a waste of paper and ink. Again thank you

[@mykitvideos5937]

Good to know

[@ernestomarcos11]

Sorry to be so offtopic but does anyone know a way to get back into an Instagram account? I was stupid lost the login password. I appreciate any help you can give me!

[@emmettiker5387]

@Ernesto Marcos instablaster :)

[@ernestomarcos11]

@Emmett Iker thanks for your reply. I got to the site thru google and Im trying it out atm. Takes quite some time so I will reply here later with my results.

[@ernestomarcos11]

@Emmett Iker It worked and I actually got access to my account again. I'm so happy! Thank you so much you saved my account :D

[@MotorhomeDIY]

The very best video on KZbin Trust me I’ve searched them all If all your videos are in depth like this Congratulations 👏

[@mykitvideos5937]

Good to hear

[@Bob123Max]

I went through a dozen "how to" explanations but this is the only one that is clear and concise. Thank you!

[@mykitvideos5937]

thank you too

[@antonfarqua]

Only a dozen 😂.

[@bobh0905]

Thank you. Clear instructions on how to set up the W3230 at last. The best video I've found on how to do it.

[@mykitvideos5937]

Wow. Best video??? I am honored

[@somebodytousetoknow]

Four years later !!!😂 Thank you for this very good Exploration.

[@mykitvideos5937]

Aaaww. I am so happy about this. 4years later😀😀😀. Its a pleasure

[@populous8232]

Same here, cheers for the info, wonderful stuff.

[@mykitvideos5937]

@@somebodytousetoknow please I need a favor. Kindly rate me on Google maps.app.goo.gl/8F8LLhtHaZwqst8A6

[@mykitvideos5937]

@@somebodytousetoknow please rate me on Google maps.app.goo.gl/8F8LLhtHaZwqst8A6

[@gcha6840]

Ok .. followed the instructions on the video and used it to control my incubator...worked great ! and hatched a bunch of chicks...thx!

[@mykitvideos5937]

Awesome. That's good news

[@mykitvideos5937]

Please rate us when you get the chance g.page/mykit-shop/review?gm

[@yankis.]

This is the only straight-forward tutorial how to set this thing. Thanks!

[@mykitvideos5937]

Welcome. Thanks

[@441rider]

Thank you from Canada! great walk through. I have it for citrus and coffee plants.

[@mykitvideos5937]

Glad I helped. Thanks for your comment

[@mykitvideos5937]

Meanwhile do you have plans of doing some business with Ghana ? 😀

[@441rider]

I am happy Ghana is more adept to these electronics than most westerners LOL! I remember Ghana from stamps as a kid. I hope I can grow coffee like Africa one day and now my cooling fan is working I am ready for 32c summer. Next I will get more car batteries for heater in 3c winter! Peace!@@mykitvideos5937

[@liamfinch4129]

This is an excellent video. Your explanation was clear and to the point. Your delivery was patient and reassuring. I learned a lot today. Thank you.

[@mykitvideos5937]

Thanks

[@minimaxou4167]

It's nice to have taken the time to make this video, she gave me a good service. thanks to you.

[@mykitvideos5937]

Thanks

[@bardoherberg4264]

Bravo ! Endlich Jemand, der die 8 Unterprogramme zeigt. Die anderen Videos zeigten alle nur die Einstellung der Solltemperatur. Mein Gerät war werkseitig auf kühlen eingestellt und ich mußte lange suchen, bis der Trick mit 5 sek. auf Set gezeigt wurde. Kein Verkäufer hatte P0........P8 in der Beschreibung. Vielen Dank

[@militca6989]

A great many thanks for your video it has helped me to finally wire my timer. Regards from Serbia!

[@mykitvideos5937]

Thank you. Glad to hear that

[@adyhous]

Thank you for taking time to share this knowledge, very helpful. I followed your settings and I got it to work!

[@mykitvideos5937]

Thanks

[@SwedenLover090]

Thank you for a nice, calm explanation of this temperature controller. 🎉

[@mykitvideos5937]

Glad it was helpful!

[@Edmech]

Bro you were a big help. And wanted to say good job explaining things. Stripped is a better word than naked 😉 Keep up the good work

[@mykitvideos5937]

Welcome. Hahahahahahaha. My bad🤭 "stripped wire" it is 👐

[@muslumyldrm24]

Thank you for explaınıng but I have one more problem I cant fınd the rıght tempature for my eggs please tell me what the p0 p1 p2 p3 p4 settıng should be

[@valentinenjoku505]

Weldone. You will be a very good teacher.

[@valentinenjoku505]

I followed your Instruction to set up mine, but it blew up on powering. Is it that the imput volt is high? I connected to 230-240v

[@mykitvideos5937]

You controller, is it 12v 24v or 220v

[@mykitvideos5937]

If it's 220v, 240V cannot blow it up. I suspect you short circuited it somewhere. Can u go over the wires again

[@liamfinch4129]

This is an excellent video. Your instructions are very clear and easy to understand. Thank you.

[@mykitvideos5937]

Thank you

[@antonfarqua]

Nice. Thanks for the clear instruction. I wanted to "piggy back" 2 together wich without your video would have been troublesome

[@briangibbon8711]

Many thanks for this great post. Brian, Lancaster, UK

[@mykitvideos5937]

thank you

[@gladstonemason5143]

Thanks a lot bro. I was having so much problem getting this device to turn back on. After ran into your video I finally got it 👍🏿👍🏿

[@mykitvideos5937]

Awesome. Thanks for watching

[@TheBeefeta]

That was a great video. Very descriptive. Thank you. Watching in the UK.

[@mykitvideos5937]

Awesome. Thank you so much for watching

[@mark9226]

Great Video, thanks. one note, P2 and P3 are not alarm set points. They set the upper and lower limit that the target temp is allowed to go to. If someone hits set and changes the target temp, that setting will not exceed P2 and P3.

[@mykitvideos5937]

thanks for your comment. so assuming I set p2 at 40 degrees Celsius. when the actual temperature increases to 40 degrees by accident, the display blinks right? why that blink and what does it mean

[@edemagbenyo3668]

Thankyou ...great video, easy to understand

[@claudiosantiago758]

you were the only one who explained what i needed. thank you

[@mykitvideos5937]

Great. Thank you for your support

[@jetcatco]

Excellent video. Would be difficult to wire with just the included directions.

[@mykitvideos5937]

thanks

[@Biczycki]

What are the gloves for? You afraid of getting infected by those electrodes?

[@mykitvideos5937]

yes please. Covid can kill u know?

[@PHancock11]

thanks for that, If I want the light to come on at a set temp, do I just change S1 and S2 around? for example I want a fan to start when the temperature gets to a certain amount. or just set P0 to C

[@mykitvideos5937]

So meaning you want to connect a cooling can, Not heater right

[@PHancock11]

@@mykitvideos5937 yes, right. I think i just select C.. is this right

[@lesspressx]

What's with the plastic gloves?

[@mauriceshaker8667]

Can that work on oil?

[@mykitvideos5937]

@@mauriceshaker8667 oil?

[@frundlemud]

Very clear. Excellent tutorial.

[@mykitvideos5937]

Thanks

[@davidlarbi7196]

Please how can I add the fan

[@emmanuelaboagye3276]

Pls if the temperature is set to 37.8, at what point will the thermostat cut

[@mykitvideos5937]

Depends. What is your P0 and P1

[@NOMAD-LEISURE]

there is a 2⁰ difference in what I set my controller for . how do I adjust it to come on exactly what I set controller for? If I set it for 40⁰ it doesent click on till 42⁰??

[@mykitvideos5937]

So make the blue number 38

[@chrismccheane343]

is it 220v in and 12v out? does the device step down from to 220v to 12v?

[@mykitvideos5937]

This particular one I used is 220volts device

[@abubakarimohammed3676]

Tnx for ur vedio but pls how do u add de fun to function with de light

[@mykitvideos5937]

Just loop the fan to the lamp holder

[@FighterAseelPakistan]

How its buzzer works????

[@gcha6840]

good job! are these controllers usually acurate right out of the box or do they need to be calibrated?? Thx

[@mykitvideos5937]

Fairly accurate

[@mykitvideos5937]

It would be good idea to check and calibrate if necessary. Many of my clients just use it without calibration but it performs well

[@farmgirltv625]

how many volts of the light bulb you used Sir?

[@mykitvideos5937]

220v

[@mykitvideos5937]

220v

[@farmgirltv625]

Thank You💕💕💕💕 we are now incubating black australorf egg and Rhode island red😍😍😍😍

[@mykitvideos5937]

Wow

[@claudiosantiago758]

your video arrived in Brazil.

[@mykitvideos5937]

Wow

[@Daldor]

Nice video! i got a problem. when i turn the controller on is just blinks H H H on the red area. any tips? it wont respond to any inputs

[@mykitvideos5937]

Is the sensor in a very very hot area

[@mykitvideos5937]

Do you know how to reset it

[@geofreyjoseph9246]

What if I want to connect with PC fan

[@mykitvideos5937]

what will be the purpose of the fan please

[@geofreyjoseph9246]

@@mykitvideos5937 for supplying constant temperature within the incubator

[@navnathambre2801]

Very nice video.. My question is , can it work for upto 2 kw single phase ac motor??

[@mykitvideos5937]

Motor? No. Because of the high starting current. U can use a contractor to help it work safely

[@MobaCry]

Hi, When you switched on power, I saw your red light didn't light on... What was the problem please...?

[@mykitvideos5937]

Have u set it

[@FighterAseelPakistan]

This is really worthful

[@mykitvideos5937]

Thanks

[@luanbui6258]

Tôi muốn thay bóng đèn thành còi, và muốn đúng 96°c theo cài đặt thì còi sẽ báo. vậy phải làm sao?

[@edmoredhokwani8317]

Is this working, thats actually opposit

[@mykitvideos5937]

Check P0 H or C

[@jokosusilo853]

Thank you very helpfull

[@mykitvideos5937]

Thanks

[@peterkele8898]

Hey man, recently i just bought one of this. however i am keep running into a problem. it is powered from the main power line 220V. but after 5 hours it just stops working. switches off. anybody had this problem? any solutions? thx

[@boussis7262]

Hey man i have the same problem can you helps me

[@peterkele8898]

@@boussis7262 I did some digging in this matter and found out that just by itself this things won’t work 100% cause it can overheat... so you must connect between the controller and the main power line a relay as well. So the machine gets exactly the right amount of juice. And keep it mind that you have to make sure that however you using it in that confined area the temperature is equally distributed ( for example with a fan), if not that’s another reason for overheating. I didn’t have time to assemble it yet but this is the basic principle.😉 good luck

[@mykitvideos5937]

Could it be that your Humidity gets so high that it enters the thermostat and maybe damages it's circuit board

[@peterkele8898]

@@mykitvideos5937 thermostat is in separate area than the actual place in question. And it is mean to be “watertight”.

[@abrahamakuka580]

Nice video

[@mykitvideos5937]

Thanks

[@laminelmc2842]

Thenks i ordred one from aliexpress

[@mykitvideos5937]

did you buy it because of my video 😅

[@Gabriel2.0]

great video

[@mykitvideos5937]

Thank you

[@MrYannickdesire]

Thanks

[@mykitvideos5937]

Welcome

[@dstdrummer]

I have never seen anyone work on electronics with weird bulky gloves like that before. Strange.

[@mykitvideos5937]

Lol