How to program Arduino with android smartphone using arduinodroid android application

[@sayanparamanick7730]

apka vido bohot useful he.....thank you

[@kuldeeppanchal]

thank you for watching my video sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@bharathp6940]

if i want use 2 hc 06 then how can i declare, in UNO to use rx0 and tx0 there is no need to declare, it is default uart pins. but in mega how can i use 4 pairs of uart pins is there any declaration required or any default pins

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@rangaswamy8604]

I'm able to upload sketches on Arduino mega but not on Arduino nano. App says board not found. Please help me out. I have selected Arduino nano CHG40 from boards setting.

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@AS-yc9nm]

what is the difference between all the arduinos? which will be better for lathe machine? what does blinking of pin number 13 actually means??

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@lawalmohammed83]

Please which brand of Samsung phone are you using for this video? Please can arduino droid run 8×48 scrolling led code? I tried but it is saying compilation error.

[@puraab12121212]

really helps a lot for beginners......thanks a ton.

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@PratiksinghMunda]

I beigineer. I brought a AURDINO UNO . I install aurdinodroid.. i connect aurdino wid my phone wid the help of OTG . For testing for i used a inbuilt sketch blink as u did. While uploading sketch i got a error: the error is process returned non zero 1.. how do i resolve this . Plz help me with this error

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@ravipatel7391]

how to send at commands to hc05 using this app...

[@mixme8655]

When i plug in my uno the led blinks already then when i start sketch the compilation error occur what to do please help .

[@kuldeeppanchal]

compilation error is not depend from mobile is connected or not compilation error is depend on your code, its your coding issue not mobile or software issue is compilation done successfully or uploading not done then check your mobile connect or not if you have any issue then you can WhatsApp my, my WhatsApp no is on video description link thank you for watching my video in my next video have lots of interesting thing to learn arduino from zero to hero and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@sahibbhullar9838]

Which is the best in these

[@kuldeeppanchal]

arduino mega is the best board, and Arduino UNO with non smd is also best for beginers sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@tanmaytanmay5798]

hey friends pls help me!!whenever I uploading the catch it showing me NO ARDUINO BOARD FOUND!!!what should I do kuldeep?

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@amalghosh7077]

Can we connect to wemos D1 mini with the App you have mentioned

[@kuldeeppanchal]

no, we cannot connect or cannot program any esp or wifi boards with this software due to not upgrade this software, i am also waiting for update this software with all esp boards thank you for watching my video in my next video have lots of interesting thing to learn arduino from zero to hero and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@luismanuelarredondomendoza2656]

Hello thanks for The video, i have a problema because My arduino Pro micro dosent work wirh The board micro of arduinodroid

[@bharathp6940]

if I want to use 2 hc06

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@krishpatil9609]

Thanks sir ! Iam making project with GPS . But while compiling it shows "TinyGPS++.h" : No such file or directory. What to do sir..please reply

[@kuldeeppanchal]

download this TinyGPS++.h library file from github, then add this zip file into arduinodroid apps, then check again and tell me if you face any problem. if you dont know how to add zip library then watch my video "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@jackpotrc7720]

Great tutorial. Thank you for posting!

[@kuldeeppanchal]

thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@bharathp6940]

I am using Arduino Uno and following all the steps that you have shown, but every time I am getting compilation error

[@kuldeeppanchal]

compilation error comes when library file not live in library folder of arduinodroid app, if you are using arduinodroid inbuilt sketch examples then compilation error will not come but if you are using external sketch then you should have library of this sketch otherwise compilation error will comes every time, i you are using inbuilt sketch example then showing compilation error, then i have another idea, sometime i use this, uninstall arduinodroid app and delete arduinodroid folder into your mobile file manager then install again and check blink sketch for compiling

[@chidiayoanasonye9243]

Using this method , can I connect up to four relays on other pin outputs excluding pin 13 ?

[@englishinsambalpuri9364]

How to install some library on android phone which is not present on android phone library . Library Downloaded from website how to install install on phone ? Please help me

[@kuldeeppanchal]

very good question in android mobile no any option available to install library, so please download library from google then copy that library folder then paste in arduinodroid library folder, and 2nd option is open arduinodroid then click menu option then click library then click add zip library and search and install external library watch my video after 2:21 thank you for watching my video in my next video have lots of interesting thing to learn arduino from zero to hero and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@ishwarlalnayak8004]

Excellent sir

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@qubitevo]

Hello Sir, Please tell me from where you had bought the Arduino Nano. If you had bought it online, then please tell me the link. I'm confused in Flipkart because there were several kinds of Arduinos.

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? , you can buy click on video description link now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@qubitevo]

@@kuldeeppanchal Yes Sir, I bought Arduino 2 years ago and done many project including those in your channel. Thanks for giving your precious time for replying me😊.

[@kuldeeppanchal]

@@qubitevo thank you too did you watch my new video about fingerprint bike starter

[@ravipatel7391]

where is the serial monitor in this app

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@prudhviraj4407]

I expect more videos from you . plz upload

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@bilalahmad3148]

I have a Arduino Uno but I facing uploaded issue I was try many time but uploaded error again and again plz guid me.

[@kuldeeppanchal]

dont worry about this issue, there are two type of arduino uno first one is UNO with dip socket and second is UNOr3 ch340g with amd version, please select correct board type if you have any issue then you can call me to solve any issue mere bhai technology ki koilanguage nhi hoti or mere hazaro friend ko hindi nahi ati, to bhai isiliye english me video banani padi, or agar bhai apka koi bhi doubt ho to ap puch sakte ho hindi me wase bhi bhai m hindi me video upload karunga jaldi thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@jayrao35]

I want program for led cube bro..

[@bestprint4817]

ohh that nice bro.. i have arduino Uno and i want to learn how to connect the DC motor or Stepper Motor on it and to control the steps of motor. can u make a tuturial for it?

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@ravichandran189]

can you please say that , wch programming language is used ?

[@kuldeeppanchal]

+Ravi Chandran c language use in this arduino ide android app Thanks for watching my video

[@jammaad7386]

Dear Can we program nodemcu board by this app

[@kuldeeppanchal]

no, becouse still not updated this app, but i hope this app will be update with nodemcu sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@AmitKumar-xb7jl]

Sir please help me, i want to make a quadcopter using arduino uno please tell me about sketch

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@toml.8210]

YOu di a good job with this tutorial. The others have no voice instruction, only music and bad video.

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@arnab_blue]

Hello... Can you give the link, where to buy "Arduino Micro"...? Thanks...

[@kuldeeppanchal]

sorry for long time not active on my channel, just click into video description link for buy these boards now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@dalesmith4609]

Can you install "Arduino as ISP" ? and can you bootload chips / "press shift + upload" to program external chips?

[@dalesmith4609]

"upload as programmer" i think it is?

[@amitjagtap795]

Bro it's saying board not found what shall I do??

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@muralikrishna5080]

hi broo wen I connected ardunio nano to my phone, as u connected,and while a I am uploading software it's showing""no Arduino board found" can u suggest .WT to and how to connect

[@kuldeeppanchal]

+murali krishna thank you for your valuables feedback, it's not a new problem, many people's face this problem sometime me also face this problem, First charge your otg data cable, use only genuine otg data cable and connect it proper and update arduino ide and also restart your mobile then recheck it, then tell me again Thanks for watching my video 😊

[@muralikrishna5080]

kuldeep panchal bro iam using Moto g 4+.

[@muralikrishna5080]

robotic mind bro finally I uploaded program😂

[@kuldeeppanchal]

+murali krishna very good bro 😊 But how, share your experience bro

[@muralikrishna5080]

robotic mind bro I changed my USB and Arduino nano and pH settings,so it's working 😎

[@eletronicsjugaaad741]

Can I use 7219 dotmatics board how

[@zazuthetraveller118]

I'd return 1 exit status error coming

[@kuldeeppanchal]

what code you are using, blink or another, sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@pratimasahu5275]

Sir how pir sensor connect code on mobile please sir please

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@townjava6845]

Can I use a mobile phone to make a laser printer?你真的好厉害👏👏👏👏

[@kuldeeppanchal]

yes, sure sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@shebazkhan13]

great presentation

[@kuldeeppanchal]

+shebaz khan thanks you for appreciation and thank you for watching my video :)

[@tejanaidu5671]

Can you design a arduino board...1) temperature and humidity 2) stepper motor should rotate 45left and 45degree right and stop .it should on every 1hrs run for 10seconds ... Also share me the cost

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@arunkumartv6262]

Can program Attiny85 devlopnment Board USB Type using This app

[@Rahulvlog7111]

Bhai arduinoDroid se node mcu ki bhi programming ho sakti h

[@kuldeeppanchal]

+Rahul kumar nahi sir abhi tak to nod mcu ka update arduinodroid me nhi aya Thank you for watching my video

[@zazuthetraveller118]

Bhai...complation error coming...

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@traceparadox]

but mine is blinking always whenever i connect with any power source

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@traceparadox]

@@kuldeeppanchal oh yes i did solved my issue actually the power cord was defective and good luck for your videos

[@pacovasda5955]

Like the other videos I've seen the information on the Android screen is too small to read but more important you're constantly touching the screen when you're not clicking stuff I need to not see your fingers except when you click I'm watching this as an instructional video and I can't follow along because you're just randomly waving your finger around the screen the whole time and the closed captions are covering up half of what you're doing so the video is absolutely worthless as an instructional video take your finger out of the screen and either move the closed caption to the top or get rid of it.

[@kuldeeppanchal]

sorry for long time not active on my channel, well, this video only for understand arduino programming by mobile, now i am uploading many video for arduino learning zero to hero now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@arduinostudioteam3615]

How about "Arduino Studio" app?

[@dannysebastian1715]

Can u give adruino nano propeller clock code plz

[@dannysebastian1715]

Email id [e-mail]

[@kuldeeppanchal]

hahaha, yes sure sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@dinesh8238]

using Moto g4 plus otg supported I can use keyboard but still no boards found

[@muralikrishna5080]

Dinesh SD hi broo Sam problem facing with same mobile"no Arduino board found". wht u did to resolve ur problem can u suggest me.

[@dinesh8238]

murali krishna Motog4plus is FULL secured mobile you will need to root and patch codes to grant permissions "do this guide at your own risk" I don't do that I use laptop to upload program. only few mobiles supported

[@premodinisingha3590]

I had click the blink button but it is not coming

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@sbaudiotech8068]

Sir other code compile eror plz help

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@AS-yc9nm]

Bhai lathe machine pe arduino kaise program karenge??? Plzz if you can make a video on that

[@aimakercat]

What's your cell phone type? Samsung ???? It's support OTC?

[@kuldeeppanchal]

+Wang L I'm using Samsung galaxy A-510, yes Samsung mobile support OTG, but some Chinese OTG don't work, use good quality OTG cable

[@shrikarchoudhari537]

How to the reset arduino uno

[@kuldeeppanchal]

sorry for long time not active on my channel, just reset the button of Arduino board now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@uniquetechchip]

👌

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@bharathp6940]

I am facing compiling error always how to overcome this problem

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@creativetech7399]

Sir mera smartphone arduino nano se connect nahi ho raha

[@kuldeeppanchal]

please check OTG or USB cable

[@mahafujmondal2320]

Great preasentation

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@sayyedshafaquerahman2250]

How we can compile 7 segment with arduino uno Please must reply

[@kuldeeppanchal]

i will upload 7 segment video tutorial soon thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@gauravshastri4244]

It does not work in my mobile. So what do I do?

[@rickzzy3049]

Uploading error! Can't open MCU..

[@muralikrishna5080]

bro can I use Arduino nano instead of Arduino uno

[@kuldeeppanchal]

Thank you sir for your appriciation and valuable response, i am happy to see your comment yes you can use arduino NANO instead of arduino uno please follow this step go menu option then c;lick setting then click board type then click arduino NANO Thank you for watching my video😊 I will upload more amazing and technology video very soon please like share and subscribe my videos😊

[@VeryMuchBlessed]

Cool. Thanks much.

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@bharathp6940]

do you know how to use serial communication pins in Arduino mega

[@kuldeeppanchal]

+bharath P The Arduino Mega has four additional serial ports Serial: 0 (RX) and 1 (TX); Serial 1: 19 (RX) and 18 (TX); Serial 2: 17 (RX) and 16 (TX); Serial 3: 15 (RX) and 14 (TX). Used to receive (RX) and transmit (TX) Thanks for watching my video 😊

[@dileeppal4352]

nice kuldeep

[@kuldeeppanchal]

thank you for watching my video

[@RizwanAli-ev9gm]

Uploading error with nano plz help how to solve it

[@kuldeeppanchal]

please follow video step by step in nano hav four type of board nano atmega 328 nano atmega328/oldbootloader and two other type also please select your board correctly if you have any issue then you can call me to solve your any issue about arduino thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@sanjaypal6863]

Sir no arduino board found aa raha hai

[@kuldeeppanchal]

please check your OTG or cable is ok or not if everything is ok then check with other mobile because sometime mobile phone issue with boot IC, if you face any problem then you can call me, i will solve your issue, and please do subscribe ,like and share please

[@BIPINKUMAR-de7nf]

Sir same problem???No board found...nd I have already subscribe ur channel..so plzzz solve this problem

[@aman7001]

@@BIPINKUMAR-de7nf solve hua kya problem bhai

[@piuselectronics5707]

can this work for Arduino pro mini

[@kuldeeppanchal]

Thank you sir for your appriciation and valuable response, i am happy to see your comment yes you can this work for arduino pro mini and any arduino board, please follow these step 1st option is go menu option then c;lick setting then click board type then click arduino pro mini Thank you for watching my video😊 I will upload more amazing and technology video very soon please like share and subscribe my videos😊

[@piuselectronics5707]

My USB to serial converter does not have reset pin

[@karavadrachetan2897]

Sir mere pas Samsung galaxy on 5 phone hai Arduino droid se blink program edit karke Kiya to save hojata hai par upload hone me bahut time leta hai aakhir me upload hi nahi hota koi solution ?

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@thewrench513]

arduino uno r3 me Bluetooth kaise program kare for rgb led plz reply

[@kuldeeppanchal]

i will upload your requirement video soon, if you have any issue then you can call me to solve any issue thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@bharathp6940]

after reinstalling Arduinodroid also i am getting compilation error as cc1plus: out of memory allocating 838860800 bytes after a total of 0 bytes Return code is not 0

[@kuldeeppanchal]

did you delete arduinodroid folder into your mobile file manager and what mobile you are using, try to compile another mobile, change your mobile becoz some mobile dont support

[@guddigari2288]

Why did you used jumper wire in Arduino nano

[@kuldeeppanchal]

for attach a LED sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@dr.satisfy5927]

Thku sir this work successfully

[@kuldeeppanchal]

thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@Alaa-cl2ui]

How I get firmware?

[@kuldeeppanchal]

sorry for long time not active on my channel, read video Description link did you solve your issue? now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@bharathp6940]

I am trying to compile the blink example but still getting error

[@kuldeeppanchal]

this problem comes with some mobile, please do this = go to file manager into your mobile then delete arduinodroid folder then uninstall arduinodroid apps then install again this app then check again blink example sketch and then tell me is that ok or not, if it does`t work then check this into another mobile

[@livetohash6152]

Why would they remove this from the play store? Sadly, it seems to be gone 😢

[@Expc86]

They didn't remove it, it's only available to devices that are old

[@bharathp6940]

I have deleted the Arduinodroid app from phone then also i am getting compilation error. I am using Asus zenpad c 7.0

[@kuldeeppanchal]

+bharath P what code you are using please send me your code, I will check it for compiling error

[@bharathp6940]

I'm not using my code I am just using blink built-in example

[@SP_EDITSHUB]

How i fixed the problem :-problem uploading to board Please kindly say the answer

[@TRUNGNGUYENVAN-nb8pj]

tôi đã lưu và biên dịch thành công,nhưng tại sao tôi luôn bị error khi nạp code ct? tôi không biết phải làm gì tiếp theo :(

[@kuldeeppanchal]

if you are facing an uploading problem then please check your mobile connect properly with arduino board and arduino software, or check OTG or USB cable thank you for watching my video in my next video have lots of interesting things to learn arduino from zero to hero and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@kabircarchamp01]

Good

[@kuldeeppanchal]

thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@aymansabah3809]

can you give me one arduino mega........please

[@kuldeeppanchal]

yes . sure sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@prudhviraj4407]

nice

[@Ash_ketchup]

good buddy

[@kuldeeppanchal]

sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@balaramsahu4566]

Showing error while uploading so many tyms what I will do

[@kuldeeppanchal]

sorry for long time not active on my channel, did you solve your uploading error now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@shubhodeepmandal1499]

How to reset it

[@kuldeeppanchal]

just reset the arduino inbuilt button sorry for long time not active on my channel, now i am active with many videos, watch my latest videos "fingerprint bike starter" thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@shubhodeepmandal1499]

Yeah this is long ... about a year now... I work with Arduino...and other NodeMCU like stuff...now I am working with rasberry pie ... this is really long Time...😁

[@kuldeeppanchal]

@@shubhodeepmandal1499 Good you have many knowledge now, watch my latest video about fingerprint bike starter, thank you

[@Digitallifehindi]

nice work bro

[@kuldeeppanchal]

thank for watching my video

[@ravindravishwakarma3938]

please send coding for lub pump

[@kuldeeppanchal]

can u please tell me in detail i will definitely help you thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@Mukeshyadav-tu3se]

Good understanding..

[@sujeetkumar-vg7sv]

nice video

[@kuldeeppanchal]

thank you sir for your appriciation and valuable response, i am happy to see your comment Thank you for watching my video😊 I will upload more amazing and technology video very soon please like share and subscribe my videos

[@alparslantekkanat179]

Can you help me for my project?

[@kuldeeppanchal]

+alp tek yes I can when I will free☺ Please tell me about your project

[@alparslantekkanat179]

instructables.com/id/VIA-Visual-Impairment-Aid-Haptic-Sound-Feedbac/ I want to do this project but I am having a hard time

[@kuldeeppanchal]

i saw this project, this is a very easy and very good project, tell me how can i help you

[@sptraderrs8565]

robotic mind bro I want to do project on automatic engine lock for drunk driver using this arduino circuit plz help me

[@inderjeetpanchal4066]

You are great boy

[@kuldeeppanchal]

thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos

[@AnandKumar-xj2gm]

Kya bhai sirf led blinking ki video banani thi aur koi nahi jaise cnc plotter

[@kuldeeppanchal]

thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@bharathp6940]

how to use those 4 serial pin

[@kuldeeppanchal]

+bharath P For example if you are using Bluetooth hc-06 with arduino mega then after upload sketch connect Bluetooth RX to mega TX and Bluetooth TX to mega RX in any serial communication pins

[@inderjeetpanchal4066]

Very good boy

[@kuldeeppanchal]

thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@EGOSTEEV]

language super

[@kuldeeppanchal]

thank you jeeva, and thank you for watching my video :)

[@EGOSTEEV]

kuldeep panchal sir which board is better for CNC

[@kuldeeppanchal]

arduino mega is better for CNC (arduino UNO also), and motor driver shield and exact power supply,

[@EGOSTEEV]

tq sir

[@jorgeluizfernandesferreira8984]

good pode ajudar a configurar meu para simular teclado para unlock efi macbook pro

[@kuldeeppanchal]

+Jorge luiz fernandes ferreira I can't understand your language Sir, I'm sorry, can you write it in English And thank you sir for watching my video

[@linguafranca7834]

It works. Thanks.

[@Sumitkumar-kl4np]

bhai yaha pe error dikha raha hai

[@kuldeeppanchal]

ap video ko step by step follow karo, agar koi bhi issue ho to ap call karke koi bhi issue solve kar sakte ho bhai thank you for watching my video and please do subscribe ,like and share for watching my next videos you will definitely like next videos, in next videos have more advance project

[@mehzadirani3160]

can u send me the code for an rc car

[@kuldeeppanchal]

+Mehzad Irani yes I will send you give me your email address and thank you for watching my video

[@mehzadirani3160]

[e-mail]

[@aha5888]

Weird

[@ЯрлславСолянов]

Кто русский?