How to Program ESP01 WiFi Module | Arduino IDE | DIY

[@abhishekulayil1930]

Considering the cost of FTDI board and the custom PCB, I think ESP12 Node MCU is more cost effective and easy for a beginner. Plus more GPIO pins

[@juschu85]

Depends on if you want to buy only a single one of these boards or more. You don't need to put the FTDI and breakout boards into the final project and can reuse them. And when it's just about cost, a lot of people already have an FTDI board and you could make that breakout board on a breadboard.

[@adamsmith5735]

agree with you. ESP-12 has lots of gpio pins and can do reasonable size of projects.

[@zachs.9220]

Thanks, clear directions and info regarding the relationship of GPIO0.

[@tonynguyen2177]

wow, so good, but why dont you upload this circut in discription part ?

[@girishpanchal9072]

Hi, thanks for nice video. Can I connect to esp01 which is on home wifi from my smartphone which is on other network maybe in some other region?

[@JohnRui-pz3lp]

i tried at least 50 hours on this, but no led blinks at all . what could be wrong?

[@amalsx]

Nice work ❤️

[@mdaslamknl]

Excellent Can you share the pcb of easyeda Thanks

[@Yuyam12]

Thank you very much! Clear and helpful.

[@jishnu_rj]

Pwoli bro

[@prakashdutt1520]

How to drive Servo with ESP-01

[@coreyman00]

i cannot get it to run any code :(

[@moving.quotes]

Damn I spent last 4 days doing the same thing and now you drop this lol

[@Nematics_Lab]

Haha I hope it helps

[@JoshuaJapitan]

What was your board settings? The blue led does flash, but the arduino ide says an error, espcomm_upload_mem failed

[@vamsikrishna-cr4xu]

Actually his connection is wrong. Should connect TX to TX and RX to RX. Then check. It definitely works

[@BrinleyPavitt]

@@vamsikrishna-cr4xu 100% correct. It worked for me. Thanks. Used Arduino Uno R3 to program it.

[@vamsikrishna-cr4xu]

@@BrinleyPavitt 👍 😊

[@RixtronixLAB]

Nice info, well done, thanks for sharing it:)

[@jacpeall132]

Keep getting this, followed the wiring exactly. "Failed to connect to ESP8266: Timed out waiting for packet header Failed uploading: uploading error: exit status 1" Happens when uploading the blink example... help?

[@orashkenazi8080]

i'm stuck on this error for weeks, feels like I tried everything. did you manage to solve this?

[@orashkenazi8080]

@@SYEDAALEEYAHAIDERBOKHARI just for you to know I got tired of this error . Got a nodemcu with an esp8266. Works like a charm although I feel like wasting resources cause I don’t use half of the chip.

[@TexasCanuck]

So my Arduino IDE does now show the ESP board - how do I get those settings?

[@Nematics_Lab]

kzbin.info/www/bejne/jWikeYGhrcilrtU

[@TexasCanuck]

@@Nematics_Lab thank you! so now I am trying to test sending AT commands. I have the MakerFocus ESP8266 ESP-01 Serial Wireless WiFi Transceiver Receiver Module 1MB SPI Flash DC3.0-3.6V

[@Sriya2000]

Thank you so much. You are my savior

[@TechnoSaquib]

Hi sir can you provide the Gerber file of the designed pcb of led panal which you have uploaded the video for the led panal. please provide that file please.

[@foxtastig9508]

Accent 100%

[@espero_dev]

You got a new subscriber :) why did I need this it helped me make a wifi hotspot to put in my car :)

[@mohamedsayed7809]

Can you please advice how to make this using Arduino Uno ??

[@SkillShaperSS]

FREE WiFI No provider thank you!

[@krishk4870]

nice one. but you gave name as "How to Program ESP01 WIFI" but you never mention programming procedure in this video.

[@tusharsarkar599]

Why you quite you tube😢😢

[@MuhammadAmin-er3qc]

nice project... boleh tak buat video tentang touch some object, n music will play by Arduino. 😊😊

[@ChefRichInaVan]

perfect! tx!

[@hirokjyoti_k]

Why don't you start selling that board in your website

[@Nematics_Lab]

Due to COVID 19 as of now. but you can expect than from New year!

[@hirokjyoti_k]

@@Nematics_Lab 👍🏻

[@mayankverma8318]

Hii brother can you please make an automatic water level controller just like kiyani tech made. He used atmega ic instead of complete arduino board so circuit became quite difficult. I request you to please make same as he did by using complete arduino board

[@a.p.7373]

Made signal jammer for mobile phones with a 10-20m range pls

[@a.p.7373]

With less components

[@المهندسللمعلوميات-ع4ك]

Good channel

[@Raphael-el7ol]

😍😍😍

[@avipatel7986]

ESP 01 programming with NodeMCU 8266

[@lint2023]

nice

[@electronic7979]

👍

[@karthickcsk7164]

❤️❤️❤️

[@5VoltChannel]

👍👍

[@techhunter2005]

i am noob but i like it

[@TheBinklemNetwork]

Lol sell the pcbs assembled

[@alcryton6515]

Yo

[@Nematics_Lab]

Yo

[@alcryton6515]

@@Nematics_Lab one question how to calculate power output of a 775 motor

[@Nematics_Lab]

P = V*I will give you rough estimate

[@alcryton6515]

@@Nematics_Lab I found same formula on net but their will be less power output. Actually I am detail designing gear box for 775 on creo.

[@allatsakis5058]

jlpcb is a shit company and very expensive. but for you its ok

[@GWorxOz]

Cannot understand a word

[@georgez.7278]

i needed to know how to programmed so it connects to the WiFi, instead you are showing some code for making it blink. This module is for WiFi connectivity, not for Light Efects porposes Do you know how to do this, or you are some pseudo-specialist, who does not know anything?????????????