HOW TO PROPERLY DRAFT SHOULDER DART BUSTIER | shoulder princess dart | NDIFON NTUI

[@victoriamusa1449]

My God. U are a blessing and a gift.. U ve made fashion n sewing more easier n interesting for me. God bless u

[@NdifonNtui]

OMG!. THATS AMAZING. Thanks

[@girllove1210]

Like seriously I really really appreciate it because the way u explain it it was so so easy for me thanks

[@sylvesterogochukwu2165]

Thanks Gentleman. I never learnt sewing. It is a talent I harnessed but at a point some parts posses some difficulties for me. Though I usually ace it but then there are little mistakes you as a customer won't notice. Mehn...all your tutorials are bam and have helped make sewing easier compounded with the fact that it is what I am born to do. Abeg collect one kiss from your wife on my behalf. You are the boss

[@phinamoni7532]

Thank you so very much for your tutorial. May God bless you 🙏 since I started following you on your KZbin channel I have really learned a lot.

[@onyinyechiopara3232]

Well done sir you are doing a great job, pls on this tutorial, I noticed the back pattern doesn't have waist dart, is it supposed to be so? thanks

[@uduakobongvictoriaezekwe9352]

I love your calm n clear explanations. God bless

[@judithemmanuel5162]

Please use this pattern to make a fitted gown without joining at the bodice.you are indeed a good teacher,I appreciate.

[@odedinafeyitunmise5999]

You are really a blessing. You really explained so well, and made it easy for me to cut. Now I can rock my shoulder bustier dress. Thank you ❤️❤️❤️

[@onovojudithuaj1417]

Sweet men, I thought I can sew sweet but yours is sweeter. God bless you man

[@idoreyinned7124]

Ur gud. Very easy to understand...kip it up👍

[@emyepeh9571]

Thanks prof, you always make things simple. But please, no darts at the back?

[@onyigood9403]

I love ur teaching please keep it up

[@oluwaseyitaiwo3493]

Weldon bro You're doing a good job Pls can we mark it directly on our fabric and cut? God bless you bro Is there going to be any challenge?

[@chikaola4787]

Wow!!! I love this so easy God bless u Sir

[@njingahprisca9579]

u are indeed a great teacher your teachings worth it. which i could give u more likes and subscriptions.,👍👍👍👍

[@NdifonNtui]

Thank you so much. U could try by sharing the video.

[@njingahprisca9579]

@@NdifonNtui ok

[@nafisatalabi2554]

Thanks alot. You have been of great help. May God reward you. Amen. Pls in cutting the princess dart, what do you do when the burst lengths falls very very close( less than quarter inch close)to the arm hole measurement. Note that the measurement is for a 15year old. Thank you.

[@modounjie6186]

I really do enjoy your lessons thank you for sharing the knowledge

[@elsaedemode7503]

Very easy to understand thanks

[@queenellao]

You make learning to sew fun, I've been using your teaching and I must say you're God sent ..... Plenty kisses 🥰🥰🥰🥰🥰muah. I don't know how to send all the clothes I made through your videos

[@estherkiatswalandu3165]

Thanks I learn alot

[@chiamakaikegbunam2407]

Well done. Nice work. Please when the armhole circumference is 22, what armhole depth should i use when marking on the fabric. Thank you.

[@asdfqwer1886]

Thanks u Soo much sir for the tutorial please if i want to put a seam in front like the one you use for the profile how will I do it

[@blessingodunayo2068]

Good job.but why did you come up by half inch over the underbust?

[@femiadebayo1375]

Thanks boss, God bless u

[@kobbenkobbyhays3985]

It was really beneficial.....applause

[@jessicaamrich]

Thank you. I noticed there wasnt any dart at the back of the blouse. Is that how it should be?

[@marthaikoke8047]

You are amazing teacher, may God bless your hustle.

[@adamurahmatullah1462]

Thank you so much 🙏

[@olaleyekehinde7140]

I love your teaching. Thanks for the tutorial.

[@feliciaappiah1482]

Hello teacher can u pls show me how to shape or couple back and front bustiers

[@justinatv2577]

I have never seen any KZbinr minus across front and across back..is it really that useful?

[@essymadu5351]

I ve learnt alot from u and wheh i sew them, it comes out sweet . Keep it up.

[@rasheedbalikis5731]

Thanks sir. Please why don't the center front and side side of the front meet at the shoulder region?

[@atujanetngohile6131]

Good morning dear, please can I cut it straight? As straight blouse no joining of any thing down

[@ogechukwuuzodike1426]

Nice video Ndi...please is it that the back pattern has no dart?

[@faitholanrewaju1682]

Thank you very much for your tutorials. I watch them every now and then and they are helpful. How do you know what niple to nipple measures to use for your female clients? Do you measure it on them?

[@dynamicmeg]

Does it mean you dont usually add dart to your back pattern? Also can you show how to do the back shoulder dart

[@veroniqueakpan3123]

I expected him to ans this question but he ignored, why Ntui

[@nuakohellen9304]

Nice one

[@Nicole-wd4fh]

Beautiful work 👌🏽👌🏽👌🏽

[@victorynwadike2541]

Thanks for all your tutorials, they've been really helpful to me as a beginner. But pls can you send the link for basic bodice pattern. Thank you

[@NdifonNtui]

kzbin.info/www/bejne/laSueqN9acSmsK8

[@victorynwadike2541]

@@NdifonNtui Thank you very much

[@chizobaihunanyachizobaihun7313]

I'm one of your KZbin subscribers now well done job

[@ramlamass2401]

Thanks thanks thanks 🙏🙏😘😍😘

[@osaroedward3742]

Pls what is the widened of the neck I wan to make Sony in exactly like dis

[@blessingjoshua7341]

keep it up guy u are good

[@marthaesorae6365]

Thx so much for this. I tried it but i had a problem after joining d the center front is always shorter in length. How do i correct that??

[@DragonFlames672]

Amazing you are a great teacher, waiting excitedly for the shirt dress😄

[@bukolaobajenihi518]

Tnx Ndi for all d videos. I understand d drafting. I have cut it. However, I find it difficult to align d centre front and d sides when sewing. I sew from waist to shoulder. It was not even at d shoulder. I sew from shoulder to waist. It was same. Plz, watz d way out. Tnx

[@marthematimatibosson9300]

C'est propre j'aime tes découpe merci beaucoup

[@atanephebe6333]

Thank you so much

[@jummaiika7189]

God bless you richly

[@getfitwithjcmua]

Why did u use 9.5 for the bust at the back of the bustier ?

[@Omawaterr]

Thanks so much boss 🥰🥰🥰

[@victoriaomale9774]

Quastion please, is it every bust that has 14inches from the shoulder to under bust before half-length?

[@princessnifemi9263]

May you pls upload the part 2 of this tutorial?

[@juliesgarb4053]

Beautiful tutorial.please I have a question concerning the waist dart.one side of the dart is straight while the other is curved.please how do you sew both lines together because I fill the curved part will be longer than the other.thanks

[@NdifonNtui]

It won't be, and even if it is, it wouldn't exceed half an inch, unless if it was improperly sewn.

[@juliesgarb4053]

Thanks for your answer .I will definitely try it and give u a feed back.

[@ukemejameson8263]

Thank you very much Sir for this brilliant tutorial. GOD bless you always. Please I followed your teaching and cut same but at the shoulder, the fabric wasn't equal, as in it was shorter...please how can I remedy this so it won't happen again on customers clothes. Thanks in advance for your response Sir

[@myjoyisful247]

U make sewing very fun. Thank u my dear so much lve oo🌹, may God grant u more knowledge and progress Amen

[@myjoyisful247]

thank u .I just followed ur method on how to pad princess dat, And I made my self a very lively dresss

[@ojongblessed9121]

Am leaning a lot from you, thank u so much

[@arhoremuje8697]

Nice job,sir! God bless you.

[@chisomezenwa9390]

Nice one dear. I loved your teaching. Please what if the burst was 46. How many inches should we go in from the underburst

[@NdifonNtui]

2.7

[@sarahchijioke8]

God bless you sir more grace

[@dokastyle7963]

He literally said must I cut it for you people 😂. Thanks for the tutorial

[@amelinadickson6057]

What about the half inche that was remaining on the shoulder line? I also didn't notice back dart.... I also didnot see you add the dart intake back to the armhole midpoint. Please respond.

[@konaducynthia3444]

Am mach grateful for your support, God bless you and your family. please the back no dat

[@victoriaoleshin8061]

Between a shoulder princess dart and a arm hole princess dart which one is better?

[@lydiaifeanyiodiefe8037]

I love the cut, I will try it later. Thank you for that

[@evidenceonuegbu9522]

Thanks a lot

[@classylook9791]

Hello Ndiii,actually do appreciate your tutorials...thank you so much. My question on this is the back...the down part that you added 0.5 and later you cut off some inches so as not to affect the zipper bulgyness....please can you explain better for us...please ☺️ ??

[@gloryusungurua9960]

Thank you sir for this tutorial,pls is it OK to use lace material for this tutorial? and if I attach sleeve will the armhole not tight for my client?thank you

[@NdifonNtui]

Yes you can use lace.

[@NdifonNtui]

No the armhole won't be tight

[@rayomide5642]

Thanks so much for tutorial that a beautiful and well illustrated 👍👍

[@winifredogochukwuogbuowelu5973]

Nice one sewing mate.!

[@chizomaofoegbu8740]

Guy, you are just good in what u are doing. I have just sub. Keep it up

[@osaretinogunmola4600]

Please how did you join the shoulder bustier

[@millicentsamuel1463]

Great teacher.God bless you.

[@folahanmiariikeade350]

Thanks so much for this tutorial.... My problem is the side is always longer that the middle part....tho I start my joining from the half length to the shoulder

[@ekeminiinyang5790]

The reduction from the zipper ( back) won’t it affect the front in teams of length?

[@iheomankemneme9651]

Is the model if the dart at the back the same with the front?

[@phinaemegu9096]

I wish to ask, why is it that whenever I cut and sew my princess dart, the front is always shorter than the back. Please help me

[@patiencetorkornoo6467]

Very nice work ,but I did not see back dart?

[@NdifonNtui]

Hold a regular back dart behind

[@veratrends042]

Princess bustier n this shoulder dart bustier which one is better..

[@abionaolanike6726]

Good

[@keaphie]

Good job and thank u. I noticed that when taking ur dart at the UB and HL u only take whatever u want to take by the side front bodice and leave the center front bodice. Pls explain thanks

[@NdifonNtui]

Thats what i do when i want it to have that Nigeria padded vibe, when I'm drafting other darts I use a different method as explained in my "how to draft a princess dart" video

[@oopsykreations3656]

Thank you so much for the vid it really helped me alot....u re the best sir

[@queenigwilo6196]

Thanks so much, very clear and easy to understand. Pls can I have ur number

[@peaceekwere4122]

Thank you

[@SeyiMyjewel]

Please can you show how you did the back and front joining, I've tried severally and always have issues with the cloth balance. Thank you.

[@chisomokere2561]

Please how did you get the measurement from the under bust line to half cut line

[@NdifonNtui]

It's standard

[@unik_afrik]

Thanks for the illustration, plz how many will u take from the shoulder if the bust is 44inches?

[@NdifonNtui]

Sorry please, I don't understand the question.

[@unik_afrik]

@@NdifonNtui just as u took out 1.5 from the shoulder for the bust that you used, how many can be taken out for bust 42-46

[@unik_afrik]

@@NdifonNtui for the dart

[@emmanuellaanyaneji9601]

Good afternoon A video too late again What if we were sewing a sweet heart neck line that extends to the shoulder dart line Would there still be a need for the dart at the top/shoulder Or just the bust dart from the underbust to half cut is necessary

[@benedictawegbe1126]

Mmwaaaa thanks so much

[@miriamyakubu1960]

Weldone Sir. I noticed u didnt put dart at the back piece. Why? Thank u

[@dorcasnjumbe503]

Thanks for the tutorial. So u don’t need any kind of dart in the back

[@ulomachijioke8258]

Please send video of off shoulder peplum blouse

[@roselinekoma5052]

God bless you sir for sharing ur knowledge

[@peaceowanghogho1927]

Please how do you get the vertical measurement

[@mabelakwetey4753]

I like the video

[@iheomankemneme9651]

Do you always determine the underbust length by measurements cos in the videos, there had been several like, 15,14,13....Is there a standard?

[@edidiongedoho8115]

Can this dart be used to make a tube gown?

[@NdifonNtui]

Yes, but you'll need to modify it a bit

[@JangaiB]

Pretty

[@apriltarila697]

I have always been having issues with my shoulder dart cut..after am done cutting and join I notice the shoulder doesn’t meet and I really do not know why but I will try this method and see if it would be any different..please I would like to see how you cut the back also thanks

[@julietujunwaezenagu1444]

Nice