Explained like a boss. Cheers. In case anyone was wondering what the blue tray is, it's called a silicone soldering mat.
@chocorose65442 жыл бұрын
This is exactly the type of tutorial I need, thank you so much !
@Fablades2 жыл бұрын
Awesome!!! Happy was useful, thanks for watching 😊
@Gluckstadt0072 жыл бұрын
Just another great video. For some reason, I love large blades and respect the pm2 but enjoyed caring the para 3. Thanks for the info!
@Fablades2 жыл бұрын
Hey thanks for watching, glad you enjoyed the content :) 👊
@skillerwhale76383 жыл бұрын
Excellent tutorial for a newbie like myself. The mat is such an ingenious setup for the knife mod. I can't wait to jazz up my Para3 in the future.
@Fablades3 жыл бұрын
Thanks 🙏 happy you found it useful 😀
@donkellington33034 жыл бұрын
Wonderful job Fab, very enjoyable.
@Fablades4 жыл бұрын
Hey thanks a lot!! Happy to hear that
@unfi6798 Жыл бұрын
Exactly what I need to see & know. Cheers mate.!
@DoingMoreKustoms4 жыл бұрын
Good job bud, keep up the great work !!!
@Fablades4 жыл бұрын
Thank you sir, glad it was helpful!
@johntowner18933 жыл бұрын
Looks so good in blackout with Ti, and backspaced. I don’t love the clip, but the dark and large profile adds a nice breakup of the Ti silver scales vs blackout blade. I just bought a p3 satin black g10, today, and instantly am regretting not have asked for a lightweight blackout, with flytanium and backspace add ons. I think I’ll get a pm2 In This config then.thanks for showing how it is not too hard to take down a p3.
@Fablades3 жыл бұрын
Yes not that difficult, and options are almost endless. I still would like to find a flush spacer, but no luck so far
@TpEric623 жыл бұрын
What a great video/channel, keep it up Boss
@Fablades3 жыл бұрын
That’s great to hear!! Thank you 🙏
@mazepa-slavaukrayini9323 жыл бұрын
Excellent description!
@Fablades3 жыл бұрын
Thank you very much!! Glad you liked it 😎
@Generation24343 жыл бұрын
Great video!
@Fablades3 жыл бұрын
Thanks for watching, happy you enjoyed it!!
@kevn4203 жыл бұрын
Or just get an already pimped Kapara. But seriously your para3 looks great! I’m about to do this with mine
@Fablades3 жыл бұрын
Sweet! I’m looking for a Kapara, never tried it, need to review one
@coreym328i3 жыл бұрын
If my estimation is correct that is the s35vn para3 which I own and customized as well but with titanium lanyard tube and green micarta scales. ;)
@Fablades3 жыл бұрын
Yes S35VN, black blade it goes well with titanium I think
@ferdinandfrancisco7403 жыл бұрын
Very Satisfying video that you made, im now planning to set up some tools, may i ask what kind of Mat are you using here? Thanks
@Fablades3 жыл бұрын
This is a generic soldering mat, you can find it online easily and it’s quite cheap. Some have a magnetic plate to keep parts from wandering around 😉
@ferdinandfrancisco7403 жыл бұрын
@@Fablades Thank you Sir👍👍👍
@sleary1233 жыл бұрын
Just subscribed!! Awesome channel! Reddit has a pretty awesome knife community also. Are you on that?
@Fablades3 жыл бұрын
Hey thanks for the support!! Yes I am on Reddit, but not really that active
@Vigilantea923 жыл бұрын
Nice video, I have a para 3 as well and I was thinking to put a back spacer but I don’t know what the purpose is or how it feels on the hand after the installation
@Fablades3 жыл бұрын
It looks nicer, and gives more structural rigidity, and the handle should be less prone to flexing
@wake7773 жыл бұрын
I picked up a para 3 yesterday and am planning on swapping to titanium scales and adding a titanium backspacer
@ek86523 жыл бұрын
Fablades where did you get that disassemble tray? It looks really handy for a lot of repairs.
@Fablades3 жыл бұрын
Got it from Amazon, it’s nice, has some magnets to keep the screws from running around 😉
@deeders74273 жыл бұрын
I’d appreciate knowing which tray. Amazon has many.
@johnwest44923 жыл бұрын
Can you please link in the description the place to pick up the lanyard tube tool , thank you
@Fablades3 жыл бұрын
Yessir www.sharpdressedknives.com/
@TE-ed9kv2 жыл бұрын
great video, where can I get the matt from. thank you
@Fablades2 жыл бұрын
Just got it off of amazon
@Mgtowfreedom3 жыл бұрын
What is the tool for the landyard removal ?
@Fablades3 жыл бұрын
It’s the SharpDressedKves SDK tool
@dubhead_dena Жыл бұрын
Hi! I have a blade from lightweight (plastic scales) and I'm having trouble inserting the blade into similar scales as yours. First, there is only one metal piece inside the plastic scales, not two (on both sides, just one). Also, I would like to add bearings, but my blade does not "groove" into the ring with bearings. What could you advise me?
@Fablades Жыл бұрын
I don’t think you can install bearings on a para3. I took the metal liners from a G10 one, not a FRN linerless
@dubhead_dena Жыл бұрын
@@Fablades Thanks for the quick reply! I have bearings on my Para3, a blade made of CPM S35VN steel (there are grooves for bearings on the blade), and I want a Para3 blade made of REX45 steel with bearings - there is no groove (?). Does that mean I only have washers to mount? I have one more request - could you recommend me a good website with scales?
@Fablades Жыл бұрын
Check Flytanium 😉
@jeremyneitzel32023 жыл бұрын
Where did you buy the backspacker und the Clip ?
@Fablades3 жыл бұрын
Spacer on eBay, clip from Apurvis 😉
@Othentic_Me2 жыл бұрын
Where’d you get that pocket clip?
@Fablades2 жыл бұрын
That’s an Apurvis timascus clip
@SUNDAYHRS3 жыл бұрын
What tool is that for the lanyard tube?
@SUNDAYHRS3 жыл бұрын
Saw your answer to someone else who asked! Just ordered one from Sharp Dressed Knives!
@Fablades3 жыл бұрын
Very nice, can’t go wrong!
@oscrm17603 жыл бұрын
Sorry my ignorance pm3 black dlc m390 not yet
@Fablades3 жыл бұрын
Yes there is a DLT with m390 coated
@jesush.vazquez68513 жыл бұрын
No oil on the washers?
@Fablades3 жыл бұрын
Yes it’s a good idea, of course! This one still needs break in period, so might want to accelerate that running it dry 😉
@dxevin36123 жыл бұрын
do you really need the tool to get the lanyard hole out?
@Fablades3 жыл бұрын
It depends, sometimes you do, the tube won’t come out, but in other cases a gentle wiggle will be enough..not sure why though
@pebbleinyoshoe5323 жыл бұрын
What’s the tools full nAme? Just f*cked my lanyard hole lol
@Fablades3 жыл бұрын
Look for www.sharpdressedknives.com
@bijantavana121 Жыл бұрын
where is the clip from I need one?
@Fablades Жыл бұрын
Apurvis 😉
@maxbravo96854 жыл бұрын
Where did u get the scales
@Fablades4 жыл бұрын
I got them on the secondary, but I think they are from Flytanium
@Alex-hw2me2 жыл бұрын
@@Fablades and it shows! shitty fitting! buy US or RU
@Alex-hw2me2 жыл бұрын
loctite was removed in pre prod :D
@Fablades2 жыл бұрын
😂
@jaredappleseed70373 жыл бұрын
Specialty tool to remove pointless lanyard hole spacer, bangs on liner, screwdriver and scale 🤦🏼