How To Protect Your Car With 303 Graphene Nano Spray Coating

Graphene is the next generation of exterior automotive protection. 303® Graphene Nano Spray Coating provides superior protection in a product that is simple to use. DJ Goodson gives a detailed step-by-step guide on how to protect your car using Graphene from start to finish.
Products Featured:
0:43 - 303® Car Wash
1:49 - 303® Speed Detailer & 303® Clay Mitt
2:40 - 303® 3-Step Paint Correction
3:40 - 303® Touchless Sealant
3:58 - 303® Graphene Nano Spray Coating
SHOP:
www.goldeagle....
SOCIAL:
linktr.ee/303p...

[@swankwash4159]

It's really good to see a company going through the paint correction step rather than just selling the products without properly informing that the paint should be corrected first.

[@eppyz]

What people are not realizing is this product is also a Carbonized Polymer infused with Graphene. Not sure if people realize how good Carbon based polymer's are. Folks see "Graphene" and are pulled in, but for me, and 303 can correct me if I am wrong, but the Carbonized Polymer is also a very stout protection in its own right. Combined with the Graphene? Makes this product very unique in the detailing world. Very interested in trying this product out. Even if it doesn't last 12 months. The simplicity in which it is applied, and no need to paint correct as most do with most "nano coatings" makes this a more realistic approach to the average joe trying to keep his ride nice😎👍

[@myjrny2]

Can you use this stuff on matte/flat and satin finish paint jobs? Thx

[@jmizzlefoshizzle23]

If you turn the lights on it's easier to see the vehicle.

[@Diminish12]

Pan the Organizer made me want to search this.

[@JWL-UK]

+1! Check out the video here on the channel featuring their R&D manager David Gutierrez, cool stuff. Hope it makes it to the UK soon.

[@TheCoolBoyz0]

Same here!

[@rjwassenaar7511]

I have used 303 products for some years now and I am very satisfied with their quality. I used 303 graphene nano spray for the first time some months on my black BMW Z4. And again I am very impressed. Two days ago, I made a very stupid mistake, however. It has been very warm and dry here, so the Z4 looked very dull, dusty and it had some bird-dropping on it that I usually remove asap, but ofcourse it never goes away completely without washing the car. So, the next day it was supposed to rain and it did. That cleaned the car up already to a great degree, and then I rinsed it with water. I expected that to rain of afterwards, but it did not start raining again, so the water dried and we have very hard water here: the car looked absolutely disgusting, full of waterspots and there were very hard to remove. So, this morning with the dew from the night still on the car, I rinsed it again and then properly washed the car, and dried it properly afterwards. The car looks very good again and I am sure that it is because it has been coated with the Nano-coat and that is what is preventing the waterspots to really destroy the paint.

[@GRJCLyon]

All Sold Out in 24 Hours. I guess they only made one case of this? WTF???

[@randyragon]

Many of the KZbin detailers got a bottle to do a video at the same time as the release. I wonder if that was most of the stock they had. I guess I was at the 25th hour. I put my email in to 303 on their site to let me know when it is available. Got a confirmation email, but no email since that it is available. I searched every auto parts site and none have any reference to it.

[@RedPillAlways]

I promise you you are not missing out on anything that graphene spray is not good.. I have tried it and put an honest and truthful review on it.. I did not find it worth it Nor did I find it next level of protection. The only thing that came good was the depth in gloss enhancement everything else was below subpar.. I went back to using what I was using before

[@roninjotatan]

@@RedPillAlways Hey bill thanks for your honest opinion on the product. I thought you might have done a video or review as well of this product but all I can find is a video of you ranting about immigrants in America and realized your opinion is worth shit you uneducated hick.

[@michaelb.hardiephotography2776]

Worst product launch strategy ever! Absolutely ludicrous and infuriating.

[@RedPillAlways]

@@roninjotatan LMAO.. You mad bro.. for an uneducated hick I do rather well... Sit down kid.. you seem to care more about me than I do about you... but also since you seem more uneducated than I do let me try to break this down a little better for you. I'll try dum-dum terms. It wasn't about immigrants( that's people that have moved to another country) or immigration(that's people that are moving to another country to Live). It was about legalization(that is people already living permanently in a country and becoming a legal part of the community an country and having all its benefits and downfalls). Something most every country does and expects.. Wow I Know.. Your brain exploded. If I move to another country and decide that is where I'm going to live then it is only right to do whatever it takes to be legalized. BUT.... I didn't know an opinion over a car detail product would leave you so anal gaped that you would throw a little youtube hissy fit and we would be here.. Seek help little buddy you will be ok.. Sincerely, your Uneducated Hick

[@MannyGonzalezReyna]

I just received mine today, can't wait to wash both cars [Honda CRV & Hyundai Elantra] and apply this awesome product (Y) greetings from Arizona

[@PureOctaneGarage]

Looks like an awesome product! We look forward to buying, using, and reviewing 303 Graphene Nano Spray Coating on our KZbin Channel. We have used 303 products for a long time and love seeing companies, like 303, advancing and moving forward with new ways to protect our vehicles.

[@manrex5238]

I bought this product when still available and not on back order like it is right now,it was October the first... today 13 days latter and I don’t hav it yet...costumer service is not bad but I should have it already.... and for what I see it is not going to be soon lol this product is commercialized by Golden Eagle company...good luck everybody. Ok update someone’s from the office called me and let me know the product was arriving late that night of October 13 and it did so now you know it takes around 15 days from the chipping to your hands and yes is great!!

[@Laimix]

When is it coming to EU or UK at least?

[@playingbadgolfwell9732]

I started using a 3x3 process on my car -- 3 coats of ceramic graphene; 3 coats of 303 Graphene Nano Spray as a topcoat; and finish it off with 3 coats of 303 Graphene Detailer spray. Once a month I follow up with a cleaning and more 303 Graphene Detailer (and once a year with another 2-3 coats of 303 Graphene Nano Spray). Admittedly, its a lot of work up front, but I haven't had to recoat the ceramic graphene since using this approach.

[@chadh6478]

Pan the Organizer lead me here, doing my due diligence learning about this product, seems like a good solution for protection/longevity/cost. Gonna have to try it out!

[@LSD04]

Mug

[@4u2nvme4ever]

Works great. It rained for two days after applying LOL. And it only has a faint water spotting. My other sprays allowed bad water spotting. Shine is great too!

[@jacksonvang2946]

Thank you ! You got to the point nice snd short love the video.

[@303Products]

You're welcome. Thank you for watching!

[@FranBushardt]

My Only issue with the 303 Graphine Nano was a defective Sprayer but I was able to change it to a Usable sprayer. The beading is Lasting through a BUFFALO NY WINTER and thats Impressive!

[@303Products]

Thanks for trying and letting us know!

[@IAmChaos78]

This is really good to hear because I'm only several hours south of you, just over the PA border, and I know our winters are pretty rough...But you guys definitely get slammed with winter up there. I'm glad it will work through the elements.

[@chouston8042]

Just applied to a new Lexus rx350 matador red, easy to apply, easy to remove, looking great. Saw a vid where I can add the detailer topper coat, plan to buy and apply that tomorrow. Thanks 303

[@gibbstints]

Question to 303 certified only.........On trim right? Does the "wait to haze" really safe to wipe away on textured black trim? No residue & no comeback haze later in time? I'm a serious inquiry & appreciate your time & effort to respond with honest experienced answers. Sincerely 💯

[@4score]

Just got the product and will try it this weekend. Here's a tip though....since @303 Products is the author of this video, why wouldn't you answer literally each comment? It looks bad when you see questions from 3 -4 weeks and no reply.

[@sidedoor38]

And three YEARS later looks even worse!

[@garretrocha8]

How tf are we going to apply this if we can't even get it LOOOOL

[@ShisuiHack]

You have to search it on online. Amazon or eBay

[@atorres061509]

Would love to buy it but I can't find it anywhere

[@ShisuiHack]

Buy it on Amazon or eBay

[@smward1126]

Advanced auto parts

[@louisdominguez7347]

Just brought it from Amazon $19.00

[@UsetoCud]

When is it available? Can’t find it anywhere.

[@jameskyle2238]

amazon now

[@mattduffy2023]

When is it going to be back in stock?????

[@cliffbartram4974]

Really love this stuff and never going back to waxes etc just amazing!

[@Tjikkko]

True?

[@cliffbartram4974]

@@Tjikkko yes true, I'm on my second bottle now it's incredible and cheap, repels even bird poo. Highly recommend it

[@Tjikkko]

@@cliffbartram4974 even bird poo wow amazing. It's not difficult to buffing? Because when it's become white, it can be rough ? I want to try, because I don't want to clay my car

[@Il-Cappuccino]

I love to buy this in europe, but can't find anywhere or i have to pay ridiculous high shipping cost from USA

[@ericanderson3533]

Yes, trying to get this, but it's out of stock. How long until the stock is replenished? You guys really dropped the ball there.

[@michaelwithers83]

Where can i buy it from in Australia??

[@Theseones]

This is a stupid question but how bad is it if it dries on the paint?

[@AndrewKellman]

Can't wait to try this

[@mynsxt6]

What about protecting the interior glass with this as well as interior trim???? I have that exact 20mm throw and it is a beast for creating that detailed high gloss before applying the graphene or si02

[@bobobaca7117]

Any tests around the increase of gloss or shine from this product? Looking to darken up and add gloss to a darker red vehicle that has not been coated yet.

[@SteveK99Sub]

Used yesterday for the first time. Here to learn what I did wrong. Easy to apply but a bear to remove. I did half my charcoal grey truck using 3 pumps on an applicator pad per panel. Did the criss cross patter to get an even coat. Hazing was mild not very noticeable. As soon as half the truck was applied I returned to front fender to remove. Could tell right away it was going to take work. Had to use a thin micro fiber towel and work to remove most of the product and then return and do again with a plusher micro fiber. Both towels felt grippy on the paint. Is this normal? Thinking about returning the product BUT really would like it to work. Any help is appreciated.

[@303Products]

Thanks for asking! The product can be grippy in nature when buffing off, but you should not have to use multiple towels. Our recommendation would be to reach out to [e-mail] to see if we can make sure you're getting the best result.

[@heathnunley502]

Should I put on top of my three year ceramic coating?

[@Thamac15]

Tests have already shown this does NOT prevent water spotting nor minimizes it.

[@tonyeliasson8634]

Nothing does that...

[@TimberWulfIsHere]

It doesn't, it is supposed to reduce the surface temp of the car. I don't know how exactly it would cool the surface but I think what they were meaning to say was that it increases the thermal resistance of the paint, thus taking longer for water spots to occur.

[@7071t6]

nothing does, no SIO ceramic coating or treatment, only a vinal wrap will protect the paint and clear coat, but it will still have spots on the vinal wrap which then needs to be cleaned as well?

[@RAZERSDRIVER]

Should I use paint prep solution before application of coating?

[@ZieXimeme]

After buff off the towels should be reused only for ditty jobs such as wheels and engine bay or they could be reused on paint? (after washing of course!) Congrats on this great video!

[@303Products]

Thanks for watching! If you just used them to buff off Graphene after it hazed, you can reuse on paint again. We recommend keeping the graphene application towels separate for only graphene use afterwards (Nano Spray Coating or Detailer).

[@17gethin]

When can we expect it to be available in the uk?

[@jeanchapman1301]

Si Dennis MTB they said on another post that they had not worked out international distribution yet, so it will likely be a while still.

[@Tim955w]

Will this be released in the UK?

[@jameswhitbread1988]

I watched multiple people test this and it dose not lower the temperature of your car stop saying that lol

[@19Clutch69]

Compare before and after..with and without?

[@JuanPerez-yy5hr]

That's awesome. Can you spray over ceramic coatings Thank you

[@303Products]

Yes! Graphene Nano Spray Coating is formulated to be layered. It can be applied on top of itself for added protection... as a base layer with a coating on top of Graphene... OR exactly what you are looking for, a topper on an existing coating. Whatever works best for your circumstances!

[@weightsoccer123]

Would this work and look alright on a tractor?

[@kakashi99908]

The soap claims to have added gloss enhancers, not the best choice for prepping for a coating.

[@PowerV2010]

My car has been previously treated with 303 Graphene , Can I use the Graphene Detailer with a clay mitt for a 2 yr maintenance re-apply instead of using the speed detailer featured in your video? After the Clay mitt I will re-apply the 303 Graphene coating spray . TY

[@303Products]

You can do that, it won't hurt anything. But Speed Detailer as a clay lubricant is more cost-effective than the Graphene Detailer. And if you're already going to re-apply Graphene Nano Spray Coating as a base protection, you will want to avoid adding a protective layer (Graphene Detailer) down first for best results. Again, won't hurt anything, but best practice is to lay down the most durable protection first, then top as needed with other products.

[@stevenrenney1732]

Do you have a product for rubber?

[@lloydalmeida7699]

Hi does this replace sealing and waxing. Thanks

[@13pcbs]

Hi, you say to coat on glass, including the windshield? If so coat the blades too, to avoid wiper judder ??

[@Capt-Joe]

Can you use that on a freshly painted car

[@darrenwaite806]

Where can I get this in the uk?

[@paulelliott682]

Is this company CO based hence the Denver metro area code being used in the co. name ? 303 step process ? 1 - 302 just didn't quit hold up ? ( shades of 409 and WD - 40 )

[@303Products]

Hello. We are based out of Chicago, IL.

[@josebracero4050]

Would love to try the product but there's no shipping to Puerto Rico. Already tried to buy it.

[@paulf1566]

Can this safely be used on matte paint please?

[@FGC2012]

Can u apply to a light wet car?

[@laserfalcon]

What gets me about all these demonstrations is they use cars that have spotless paint to begin with

[@lukejackson9848]

303, What's the recommended sequence after I perform a decontaminate wash: First clean the windows with a window cleaning product, then apply 303 Graphene Nano to windows? Or 303 Graphene Nano to the windows first, then use a window cleaning product after?

[@303Products]

Thanks for asking! 303® Graphene Nano Spray Coating can be applied without prep, however, to get the best performance we recommend cleaning and decontaminating surfaces before applying the product. To answer your question: 1.) Clean the windows with your preferred product 2.) Buff to dry 3.) Apply 303® Graphene Nano Spray Coating

[@quinnhall4640]

I would need a sample size to see if it’s worth it

[@crimsonnightt]

Hi, Is there any supplier of your product in Trinidad and Tobago, WI?

[@cosmogtopper]

Can this be sprayed over wax?

[@303Products]

Yes, this product is designed to be layer-able. However, it's best practice to apply the most durable coating as the base layer, whether that's 303® Graphene Nano Spray Coating or another coating of your choosing.

[@kamalshukri1742]

Do i need to wash the car again without soap after i apply graphene? Or just leave it like that . Thank you

[@303Products]

Thanks for asking. No, the rinsing in this video was a demo to show the hydrophobic properties of Graphene Nano Spray Coating. There is no cure time or extra washing needed before the product is ready to hit the road!

[@burttackleberry8872]

How long should I wait to put on the detailer after doing a basecoat with the Nano?

[@303Products]

Thanks for asking! There is no cure time for Graphene Nano Spray Coating, so you could use Detailer after buffing off the initial coat if you chose to. Graphene Detailer is meant to boost protection between washes and add slickness and shine, so it really depends on personal preference on how often you want to apply it. Hope this helps!

[@lloydalmeida7699]

Hi does this product replace sealing and waxing. Thanks

[@303Products]

Thanks for asking. Yes, 303® Graphene Nano Spray Coating can, as it provides a durable layer of protection on most vehicle surfaces. It also binds well to most other coatings out there if you have something else already applied. It is best practice to decontaminate and correct your car's paint before application, but it is not required to see the outstanding gloss and hydrophobic properties the product provides.

[@IAmChaos78]

Hello. So the video confuses me a little. Should we put a sealant down BEFORE applying 303 Graphene Nano Spray? If it isn't required, would it make a big difference either way? I just purchased the graphene spray recently and I can't wait to use it, but I want to make certain I do it correctly the first time. I appreciate you guys.

[@303Products]

Thanks for asking! You should put the most durable coating down first. Most cases, in DIY scenarios that will be 303 Graphene Nano Spray Coating. Touchless Sealant or any Si02-based Ceramic Topper can be used on top of the graphene as a layer of additional protection after maintenance washes if desired.

[@IAmChaos78]

@@303Products Thank you for the response. Is a maintenance wash required before applying the sealant or can I get away with immediately applying it? I intend on doing the full 3 coats of nano spray.

[@303Products]

@@IAmChaos78 It's best practice to wash and decontaminate your paint before applying any protection product (Graphene or not). In some cases also correcting the paint. This allows proper bonding of the coating to the surface. You can use a clay bar or the 303 Clay Mitt to decontaminate with a detail spray for lubrication. And as far as how many coats, one coat should work well if applied correctly, but it won't hurt anything to add more. After three coats though, you won't see much more additional gloss or protection.

[@IAmChaos78]

@@303Products I apprecaite the intel and I definitely will be doing paint correction first because that was part of my original plan (I have some ugly swirl marks that blind me when the sun hits it just right). I love instructional videos and I'm really glad I stumbled on this one or else I wouldn't have known about Graphene Nano Spray. Keep the products and videos coming because they are very much appreciated!

[@RCGJR_]

Canada release?

[@gkirms]

Still sold out. I guess that one case they made holds true.

[@sergenity]

something is wrong with your spray bottles, they will break after not long use. I poured it into a bottle from Koch and it broke right away)

[@Pearl3Drummer]

Great product! The stuff is amazing! Do you discard the applicator and towels or can they be washed and reused?

[@bobnethen1180]

How could I get some ?

[@dhi699]

QUESTION.... Can 303 graphene spray be safely used on PPF?

[@303Products]

We recommend checking with the PPF's manufacturer to see if exterior coatings are safe to use before applying 303® Graphene Nano Spray Coating.

[@cpuuk]

Still no international delivery :-/

[@JohnSmith-id6qm]

It isn’t in the UK

[@PTerracina]

Is this product safe to apply on top of clear paint protection film?

[@303Products]

Please check with the manufacturer of any Paint Protective Film before adding 303® Graphene Nano Spray Coating to the surface.

[@BW-kv9wj]

But can it be applied over a car that has been waxed? Does it block UV rays and reduce the suns ability to oxidize paint? My car sits outside all the time. Any suggestions to stop sun oxidation?

[@303Products]

Thanks for asking! Yes, Graphene Nano Spray Coating is designed to be layered. So it can be used on top of an existing coating... on top of itself for added protection, or as a base layer with wax, ceramic, or si02 spray on top of Graphene. It also absorbs and disperses the energy from the sun to reduce the surface temperature and reduce water spotting. Hope this helps!

[@BW-kv9wj]

@@303Products Actually no, you didn’t make it clear. You said it can be applied to an existing coating or applied with wax. Does an existing coating include a ceramic WAX or Carnuba WAX? What is you definition of an Existing Coating? know wax can go on top of it, but can Graphine be applied on top of wax?

[@303Products]

@@BW-kv9wj Yes. Graphene is safe to use on top of wax, however, it's best to put the strongest protection on the bottom. So, if you're going to use wax, the best use would be to use Graphene Nano Spray Coating as a base layer, then use wax on top of it as needed.

[@BW-kv9wj]

@@303Products sounds good. Thanks

[@thomasuniat2939]

Hey, Dimitry's Garage is a great youtube channel that does epic product reviews. Any chance you could hook him up with a bottle of the 303 Graphene spray? I'm waiting to see his wash and shine testing before I buy. He said he cant get a bottle because they are sold out.

[@hiteshgajani5708]

how much price in india

[@myjrny2]

Can you use this product on matte/flat or satin finishes? Thx anybody.

[@303Products]

Thanks for asking! Yes, Graphene Nano Spray Coating is safe to use on Matte/Flat exterior finishes.

[@myjrny2]

@@303Products This product available in any auto parts store?

[@303Products]

@@myjrny2 Yes! You can purchase at AutoZone, Advance Auto Parts, and select Walmart locations. Or you can order online at www.303Products.com

[@sergenity]

Still not available?

[@303Products]

a.co/d/2NmU1HH It is available on Amazon to purchase. Thanks for checking!

[@jaafarrenggo455]

After i applied 303, can i apply ceramic coating on top of that?

[@303Products]

Yes, 303® Graphene Nano Spray Coating is meant to be layered, so it can be used as a base like you're suggesting. However, depending on the strength of your ceramic coating, it's best practice to apply the strongest coating first. In most cases, that WILL BE 303® Graphene, but there are high-end solvent-based ceramics that claim up to 5-years of protection. So, you would want to put those on first, before potentially using 303® Graphene on top of that. You could also just do two coats of Graphene for extra protection. Hope this helps!

[@jaafarrenggo455]

Thank you for your info.

[@LSD04]

How much REAL graphene is in your graphene spray?

[@huntthewild6643]

Probably none, they must use a polyamide structure that acts like graphene, real graphene is very expensive to produce.

[@goldenbear31]

Where is best place to get 303 products in Canada?

[@303Products]

Amazon is always a good bet and your local auto parts store should have a few products as well!

[@martinmcgrath8645]

When will this be available it has been sold out for sometime now

[@demetrios72]

Can this be applied on top of an exisiting coating wax or sealant? Thanks

[@303Products]

Thanks for asking! Yes, Graphene Nano Spray Coating was designed to be layered. It can be used as the base layer, and you can use other products as a topper. OR, as you mentioned, it can be used on top of an existing coating to add extra protection. (It can also be used on top of itself as a maintenance coat if you want.) Let us know if that helped!

[@demetrios72]

@@303Products Thanks for getting back to me on this topic, you mentioned it can be used over an existing coating but does this also include waxes & sealants? Thanks again!

[@303Products]

@@demetrios72 No problem. Yes, it can be used on top of those for sure! The best practice would be to put the strongest protection on the bottom, so depending on what you're using, 303® Graphene Nano Spray Coating could be best used as the base layer. However, it's completely fine to use as you're describing, on top of waxes or sealants.

[@demetrios72]

@@303Products Perfect!! Thanks !

[@derikesaucier654]

Next we need a graphene waterless or rinseless wash, and a graphene car soap.

[@303Products]

Who knows what's next...

[@albertteng6063]

Can we go from wash and skip to nano spray coating?

[@303Products]

Yes! If you are happy with how your paint looks, you can apply Graphene Nano Spray Coating after a wash. However, best practices would be to decontaminate your paint, with our Clay Mitt for example, and to correct any scratches or swirl marks with a polish, like our 3-Step Correction trio. BUT, it won't hurt anything to apply after only a wash.

[@albertteng6063]

303 Products thx for the info 👍🏻

[@smoooth6021]

Is this in any auto part stores yet? and if not when?

[@dantonacci67]

Not inAuto Zone yet.

[@SinCityDetail]

Does it offer any UV protection?

[@303Products]

Yes! The formula used offers UV Protection.

[@SinCityDetail]

@303Products I'm going to give it a try. I already use your plastic protectant and it great here in Las Vegas. That's why I asked about UV protection. It's essential here.

[@303Products]

@@SinCityDetail Glad you like it! Let us know what you think of Graphene. Thanks for using 303!

[@SinCityDetail]

@@303Products I just ordered a bottle, so I'll let you know what I think. I have an upcoming video on my Ram 3500 that hasn't been detailed since May of 2023. It'll be great to see how it makes the white paint pop!

[@mincooper]

Is this safe to use without gloves?

[@303Products]

Graphene Nano Spray Coating is safe to use without gloves, but we recommend using nitrile gloves to avoid the potential for any reactions to sensitive skin.

[@microminiskirt]

TO LOWER TEMP ON PAINT PAINT CAR WHITE. PRODUCT NO GOOD IF IT ISN'T AVAILABLE. LIMITED PRODUCTION🤑

[@user-gn4uo8sz3w]

Супер конечно!!! Но где купить этот продукт в Украине??? По нормальной цене

[@dtna]

How and when should you wash your MF towel after using this 303 formula?

[@303Products]

We recommend washing your microfiber towels as soon as possible following use. Same day as an application if you can. Wash on delicate, cold water, free & clear detergent, then dry on low heat. These recommendations are for any time you use microfibers and are not necessarily specific to use after applying 303® Graphene Nano Spray Coating. So, regular microfiber care works great after using Graphene too.

[@J1Z06]

I tried it...not bad. In no way did it feel slick.

[@paulff3]

No can find.......

[@aaronnoll3010]

Anyone use Adam’s graphene spray

[@michaelb.hardiephotography2776]

Yeah, good stuff. Now why are you pushing it so hard all over KZbin with influencers etc and literally not have it for sale anywhere online or in stores. Absolutely horrid execution of a highly anticipated product launch.

[@CHRiSQ_XIII]

Dude, I need this thing so bad! Where to get it? It’s out of stock...

[@johndoezg]

So many lies said in this video😂

[@middlegaautomotivedetailin1350]

NOPE