How To PUT BRAIDED Fishing LINE On A Baitcaster❗️(EASY)

#shorts #fishing #bassfishing
The MOST FUN Thing EVER ❗️The ELECTRIC BIKE USED In The VIDEO (CODE:DAT VAN)-www.mokwheel.com/products/bas...
Get Your Very OWN ProFishiency KRAZY Reel HERE-profishiency.com/
Get Some MoTivated Baits Here!! Make SURE To USE CODE “datvan10” At Checkout-www.motivatedfishing.com
Get Your VERY OWN Kayak Here At No Bad Days Kayak-nobaddayskayak.com/
Go use CODE “DVPro” to get %20 off EVERYTHING at CASTAWAY RODS-castawayrods.com/
Hope you enjoyed it & thanks for watching :)
LIKE, COMMENT, SHARE & SUBSCRIBE!!
STAY POSITIVE AND STRIVE TO BE BETTER EVERY DAY!!
Business [e-mail]
CLICK HERE TO SUBSCRIBE ⇩
/ @dat_van
FOLLOW ME ON INSTAGRAM ⇩
/ datvantv
FOLLOW ME ON TIKTOK⇩
www.tiktok.com/@dat_van?sourc...

[@Dat_Van]

Hey guys! There’s a few ways you can spool BRAIDED line on a baitcaster. You can tie it through the holes on the spool or use electrical tape. In this case I used backing in this video since I didn’t have a full spool of braid. I hope this helps!!

[@queenkhan1205]

Ha

[@richardanderson2837]

Hey man, who makes that reel. I've been wanting to get one like that. But forgot who makes it

[@arletz]

baitcaster reel name?..

[@alycdabomb4222]

@@richardanderson2837 ProFishiency Krazy bait caster. They have spinner ones as well

[@alycdabomb4222]

@@arletz look above this comment

[@austinhernandez2716]

I've never added backing before and my line never slips.

[@Dat_Van]

It’s bound to happen you’re going to be like my drag broke but in reality it was just your line slipping

[@zach9937]

@@Dat_Van I’ve always threaded the braid through two of the holes on the spool and tied it on to the spool, if that makes sense 😅that way it’s impossible for it to slip

[@ederson927]

@@zach9937 same here never slips for me by doing that

[@hoodiegriffo]

@@Dat_Van if your spool has holes in it tie it thru one or two of them. the line will now actually have something to grab onto thus making the line tighter on the spool and stop slippage. it’s simple physics.

[@austinhernandez2716]

@@zach9937 not all of them have homes though but that's what I do too if there are holes

[@bassmaster9571]

Use backing for solid spools….that’s why they started making spools with holes so you can tie your braid straight to the spool so it won’t slip. 👍

[@huntermoore7888]

Pretty sure it's also there to help the line dry out better when not in use.

[@hvuu1628]

​@@huntermoore7888multi function by design.

[@intensity.density2208]

And to reduce the weight of the spool, too!

[@mpell4110]

Its to reduce the weight of the spool. Tying line through the holes is generally a no no.

[@Apexfishing2010]

I like how you matched the line to the reel color

[@Dat_Van]

😂 it’s like the saying look good feel good so that’s why I guess 😂

[@donnieharness2]

how cute

[@bakerhead_]

Do you know what line that is or brand looks good

[@fritzthecat9451]

Red Abu Ambassador with Cajun Line was always my go to.

[@murf77donnelly33]

Yea fish love it too 😂😂😂😂

[@Harrison_golf]

Don’t need backing if your spool on your reel has holes just feed the braid thru one or 2 holes will never slip

[@Dat_Van]

That works as well! I didn’t have a full spool of braid so I just used backing in this case !

[@MrFLUFFYtheMEXICAN]

We use this exact technique in tackle shops, try fly line backing instead of mono, mono definitely works but fly line backing is a bit cheaper and really bites into the spool. Plus it last a long time as opposed to mono

[@SuaSponte75]

Mono as backing lasts forever as well.

[@shadowcard6923]

Braided line can also be tied through holes or if you wrap it around twice over a layer of masking tape it’ll also stay put. Key is giving the braid something to hold to. Also you have to spool at about your max drag you plan on using or 1/2-3/4 line strength or you’ll get braid bite

[@S2pidMedia]

Electrical tape works great

[@WesleyAPEX]

The albright knot aka ALBERTA KNOT

[@stevejohansen5373]

My preferred method to prevent line slipping is adding a small piece of electrical tape over where I tied my line onto the spool

[@Stonehorn]

Exactly. I’ve been doing this for 20 years now. Just a tiny strip, I’ve never had a line slip. I’ve had lines backed by Cabelas/BP slip on me, because kids are dumb, and nobody else but kids and retirees work for them (this is because of their awful employee staffing practices and the way they prevent people from working full time, and understaff stores, so nobody can afford to work for them, in Canada at least). A piece of tape people! And give your money to mom and pop tackle shops wherever possible!

[@Lloyd_Will]

Personally I put electrical tape on the spool and then arbor knot my braid to the spool, if a fish runs you out and you’ve got a leader to main line to backing you’ve got too many potential break points

[@jaredbeetham314]

Braid should always be put on wet and under much more pressure than your fingers can provide. If you put it on loose the first time you catch something decent the line will cut into the line below and bind. Putting on wet via a wet towel removes all the waxes and excess die from manufacturing.

[@CPTFiXtion]

That makes so much sense. Thank you for the tip!!!!

[@chrishealy1381]

No it shouldn’t be put on wet.

[@CatfishCameron]

Lol Cabela’s spool job right there..hope you don’t have a fight to the backing cause that fish’ll be gone, wrap the line 8-10 times around your spool then uni knot= no more line slip

[@AJFishing2009]

What braided line do you use?

[@thereelanglerfishing7240]

Dad Van you’ve always been my favorite yt shorts fisherman and I love watching these shorts. I hope to someday make it to bass masters elite

[@TheLastCastwithTicktolic]

That’s the perfect way to show it. Thanks bro!

[@JustinTopp]

Did this a while back on my catfishing poles which had a terrible problem with slipping. Works great now

[@grahammiller4127]

I love your reel and vids keep it up

[@Astr0_rl]

Where did you get that reel? It looks awesome

[@hen_17]

If you have a small size spool, or don’t want to do a mono backing, or just want to maximize your spool capacity. Use electrical tape! Just do your normal line to spool knot then add a short or decent length of electrical tape over your knot and make the tape flush to your spool and line; and then spool your reel up. Works for me and I have not slipped or had any issues 🎣

[@NeutralBruu]

That's my go to method and it works great!💯🤘

[@sambageian2948]

i use silicon tape used for bike grips, it self seals on itself once you do a single layer wrap and never comes off or slips

[@garybarajas9607]

Use electrical tape for backing and you won’t have to worry about a weak knot. And use a fg knot way more stronger and closer to the diameter of the main line

[@noloriver6687]

sick ass reel brotha, line is dope aswell

[@shanedelgado666]

What is that glorious baitcaster?

[@GetCr0ss3d]

ProFISHiency Krazy baitcasting combo. I got mine for about 200 but it’s worth it very solid rod

[@nicholasrowe9877]

Love the video. If the reel has holes though, you can tie the braid through the holes.

[@Dat_Van]

You can do that as well I just happen to not have a full spool of braid so I used backing. I appreciate the love and I most definitely appreciate your viewership and comment!!

[@nelchestrasmonte9968]

Thanks for the info love this

[@Mylesmoore11]

What line is that

[@Sanotsuke]

I'm interested to know what reel is that lol

[@a15navar]

ProFishency Krazy. Pretty sick reel for 80 bucks.

[@luketoofamous2922]

I use 1 layer of electrical tape on my baitcasters and spinning reels so the braid won’t slip.

[@Therealcarlwheezer]

We’re did you get the rod and reel I’ve seen it everywhere and want one for myself because I love the way it looks and have heard really good things about it

[@DosDos66]

What reel is this

[@GMDaddy1]

Step one: electrical tape. Step two: spool the braid.

[@cheapshotfishing9239]

Chad electrical tape enjoyers vs virgin backing users

[@tacot5983]

What rod and reel is thay

[@Upnorthfishing44]

Most of our saltwater rods have thick braid as the backing followed by a top shot of mono. I don’t know much about freshwater fishing but I’m pretty sure you’re fine with just braid.

[@martindavies2126]

I don't use backing just a Arbor knot never had a slip while using braid

[@Dat_Van]

That will work as well !!!

[@Therealcarlwheezer]

How much did you pay for that rod and reel I have seen it everywhere and want one for myself

[@braxtonberry2174]

I do the opposite braided fully with a mono leader. I like the responsiveness of the braid and the the invisibility of the mono

[@teeanahera8949]

The line visibility is irrelevant. All colour wavelengths are absorbed by the water, each colour wavelength is absorbed at different depths until only blue goes last (that’s why water is blue and so is the sky). Fish don’t take any notice of the line in the water, it’s just another bit of weed to them.

[@J10_33]

That’s the coolest reel I’ve ever seen

[@haydenrand2385]

Trying to find out what it's called

[@michaelmartin2606]

​@@haydenrand2385i have it its the KRAZY

[@Eric-469]

Total newb fisherman here, but this probably explains why my braided like went on so loose and messy. Thank you!!

[@Naxatthedoor]

I don’t fish bait casters or conventional gear in general but on spinning gear backing is useful for when you’re getting spooled, I even use it on braid ready spools because mono does better under extreme resistance due to it being able to stretch, also it’s cost effective as well and it helps with keeping the braid from digging into itself under immense pressure, but I’m sure some fishing gurus on here will say “I’ve been fishing for 60 years and never had that happen with braid” but it’s not like grandpa ever told stories of catching world record fish, well at least none that he can prove lol

[@constancedragonette1919]

You helped me so much😊

[@thorjet2112]

I needed this so bad. I am investing in a bait caster right now, but I don’t know how to put line on any real. So I thought I was gonna have to go to a store that would do it for you. Thank you for this

[@michaeljorgensen1984]

Tie your braid directly into the holes. Only time you need backing is if u don’t got holes in your reel.

[@krogerroosipuu3060]

what reel is that?

[@Dat_Van]

Profishiency Krazy reel click the product tab on the video if interested!!

[@kummerinnigge4853]

Can you share video how you tie that knot

[@Un11Hoe]

It's very easy to tie your normal knot and then using a little piece of tape or part of the sticker that comes on your spool of line to prevent your line from slipping

[@albeezy6608]

What kind of reel is that ?

[@Daniel309]

Its called the KRAZY reel

[@chaitern6075]

A small piece of tape is what i use full braid

[@manafishing6065]

Did you colour your rod and real if so how did you do it

[@hodymaayo5169]

I really want to but it's very expensive maybe there are fishing friends that are no longer used for me to learn 😞

[@SuaSponte75]

Tighten down your tension knob to spool. You don't need to tighten the drag... it's called a tension knob for a reason. 😂

[@trumps-a-hoe]

Never had braided slip and never had "backing" to prevent it. The reels I use have a way to attach the line to the spool, either holes or a little nub to tie to.

[@acluuX]

What type of reel is this

[@kasutburukk1922]

Thanks for this video ❤

[@madxp9668]

did u use a braided line for bottom fishing on casting applications

[@mikesilva8493]

Electric tape or a band aid will work also

[@jay_jay99]

What Reel Name ??

[@LANsolo12]

I use the mono or floro for my leaders because it is hard for the fish to see and use orange braid as the backing because it is more visible on the water for me to see where my line is.. but to each their own

[@iinirawan7013]

Reel name broo?

[@theofficialtk1660]

What kind of baitcaster is that

[@gurreg1524]

You can also use double sided tape instead

[@user-xq7re5sq1d]

I've never added backing and have never had braid slip. As long as your knot is tight and line is tight when re spooling it'll be fine.

[@toasterstrudel19]

What size braid and mono are you using and do you have to match the line weight to each other or does it matter?

[@Dat_Van]

Great question it doesn’t matter in this case it was 12 mono to 40lb braid

[@reptilesforlife656]

@@Dat_Van what the name of that rainbow braid?

[@Dat_Van]

@@reptilesforlife656 reaction tackle braid it’s some cheap braid I just had laying around!!

[@antoniuskriskuncoro4103]

What's the brand of your rail bait casting

[@bradyprice5596]

Crazy

[@hoodiegriffo]

if your spool has holes in it tie it thru one of two of them. the line will now actually have something to grab onto thus making the line tighter on the spool and stop slippage. it’s simple physics.

[@zerox4231]

Yea never tie your line in the holes. The edges of the hole can be sharp sometimes and this can also dmg the spool

[@hoodiegriffo]

@@zerox4231 yeah never had a problem, all the holes are smooth on all of mine. don’t have to worry about damage.

[@erikvillalpando5492]

What bait caster is that? Looks sick👍🏽

[@919mudproductions3]

what rod and reel is that?

[@Hudson_daly]

ProFISHeincy crazy combo

[@lilsippi0189]

I was thinking of buying the spinner version of that reel from bass pro

[@InzoneProd]

Nice job dat!

[@rakakykychanel4772]

Very good fishing rod sir...and creative I really like it. Usually I fish for catfish in my country..

[@alexrodley4854]

You don't need that much backing, only needs to wrap the spool 5 ish times

[@KatoBull]

What pound braid is that

[@benjaminburner2932]

What brand of string to you have on your pole

[@kushairiroslei]

backing isnt only to avoid line slipping but to save your line.

[@timothykee9702]

The real question is what is that reel

[@muhammadaqil8617]

What a reel name

[@filipjulin3669]

Finally a video were you learn aomething usefull. That baitcaster i sick whats the name if it?

[@Dutch9604]

If you're putting braid-line on your poll, you don't need any backing line. If anything, you want braid-line as a backing line.

[@summerobannon7784]

Is that braid an online order or is there a store that sells it... I havnt seen this for sale anywhere

[@mikedeguzman1]

I add some electric tape on the reel then add the braided line. It allows the braid to “bite on” the tape and avoid slippage

[@SuaSponte75]

The backing also help the Braid lay flater on the spool. Slipping doesn't only happen on the spool directly but 1/2 down on the main line in the spool... less Braid on the spool help with that. Even pros state 40-50 years of backing, then main line on a normal baicast spool that holds 110-120 yards of 12lb test.

[@fishingwithaaron314]

work perfect

[@Brittonclemm]

What’s that reels name and is it good?

[@SuaSponte75]

Iprofishency... str8 trash

[@levilundstedt7373]

What baitcaster is that

[@Pobreng.Mangingisda]

I like that rod

[@Taylorrogers1083]

You also can use electronic tape for backing

[@devanmarshall1739]

If you tie the braid to the spool like you did with the backing it won't slip😊

[@kevinharrison498]

How do you find good consistent fishing spots

[@rhyspitt8652]

Where did you get your reel from

[@THE-FISHERMAN-424]

NICELY DONE MATE GREAT JOB IAM WATCHING FROM AUSTRALIA TIGHT LINES 🇦🇺 🙂 👍

[@tannerfrancisco8759]

Backing isn't just for the line not to slip on the spool. It's so you don't have to put 300 yards of braid on a reel at a time. You are only casting with 50 yards max so you only need 100 yards of line at a time. You can calculate (or find an online calculator) the amount of mono backing to use first to then put on the 100 yards of braid. This gives you the weight of a full spool so you can cast further and more efficiently without the cost.

[@austinhernandez2716]

What bass reel holds 300 yards of braid? Maybe some but not most that you use for lures everyday.

[@S2pidMedia]

@@austinhernandez2716 right. Most hold between 110-140 yards of 30lb braid.

[@Jayden_saephan]

What brand braid is that?

[@cheapshotfishing9239]

Electrical tape is a lot easier than backing

[@benjaminmca7823]

What country do you fish in?

[@tanker335]

Scotch tape the line to the spool. Much easier and works just as well.

[@tamoose1]

What is that multicolored braid? And that dope reel?

[@anggitpurwanti7440]

what is the brand of the reel?

[@bb4ka]

what is the name of this fishing reel?

[@morgancooke5971]

I always just put the braid through the holes on the spool and tie a knot then reel. I thought that’s what those holes are for lol

[@javiclase]

What bait caster is this i love it

[@eastonfieldsfishing]

Can you post a tutorial for the backing to braid knot?

[@Dat_Van]

For sure man I’ll write it down!!

[@RandomChannel-eg3wx]

Instead of backing you can also use tape

[@domsantander2641]

What reel is that?

[@bradvickers2065]

I thought it was a Albright knot?