HOW TO PUT SPRING BACK ON BABYLISS TRIMMERS

[@Gunz_954]

I was disappointed because the video wasn’t focused, but if you actually listen and watch the full video it’s the best way

[@videonmode8649]

Thanks for having half the video out of focus, really helps!

[@giovannihernandez7147]

😂

[@princethexiii922]

Shit didn’t work at all

[@blackbobross4960]

Stfu bro be thankful someone took the time to help us that don’t know. Smh

[@caap2937]

Real shit

[@keithmccrary6882]

Ong I still can put shi together

[@bigquann2011]

Is it the same for the clipper?

[@Dubhuir]

Did you watch the footage you captured? It's completely out of focus.

[@daguy69]

Didn’t see anything 😭 might wanna make another video focused

[@ramin3474]

Once I opened and closed my gold babyliss trimmer, but it was never the same as before , it does not cut the hair anymore and just gets hairs and hurt

[@impodds]

Easy way. Tightened without the black plastic thing just alittle then put it together by raising the spring legs in it’s appropriate positions and tighten finally. Works great.

[@thefirsthat5408]

After two hours thank you

[@redzo8325]

after erasing my finger tips, thank you !!

[@sarahm1181]

What is “the black plastic thing”

[@shakeemwilliams9691]

goated

[@GetPapeStayOutTheWay]

Bro on my momma this worked 😂😂😂😂 THANK YOU SO MUCH!!!!

[@rizktv5720]

Does loudness on my trimmers depend on the spring only?

[@RONNIERIPPZCARDS]

So glad I aint the only one having issues with the spring, appreciate you 🙏

[@johnacutiefn6212]

I think my spring is broken😕 I put it on but one of the spring legs keep coming off the area it needs to stay in, so it goes all crazy when I turn it on

[@sinaklsindre2831]

Man the exact same thing happens to mine, did you find out?

[@ericmillan2341]

Will this work on a lo pro babyliss trimer

[@mannyDification]

Yes it will just screw it in the push the prongs in and you'll be good

[@brownyourbarber1370]

Where do you order a replacement spring for the Babyliss Pro clippers?

[@FadeMasterLos]

If you don’t have the spring. Usually better to buy a new set of blades.

[@shanesosaa9854]

@fademasterlos where can i get a replacement screw that holds the spring down

[@jadenrobinson8471]

My trimmers aren’t cutting like do I just need to buy a new blade? Cause the motor is fine and I just bought it like 3 months ago

[@kameishagreenunapologetica8210]

Mine not cutting neither; after putting back together

[@nortestar20]

Would u know how to do the babyliss pro trimmers?

[@luisornelas-eq6bp]

Could you dip that whole part, including the spring, into barbercide?

[@venturebeats7224]

This video was helpful thanks! I had gotten stuck and didn't want to break anything.

[@zzgo-hm4pb]

I have a Wahl Lithium Ion 2.0 that I was cleaning and I took it apart too far. That spring popped out and I can't figure out how to get it back in. Any suggestions?

[@anthonychimienti5386]

Thank you so much I'm a full-time student and Barber college, took my clippers apart today to sharpen the blades and completely failed putting them back together thank you for your video

[@ravsingh3405]

I was struggling to do this following the video, the spring would just keep popping out. I took everything off, then screwed in the bottom holder where the spring goes into, but halfway tight. Then turn it around so it actually faces the opposite way and not towards the blade. Slide the spring underneath and it should sit there, then you push this piece and the spring all the way round to face the right way up. Once that’s done, tighten the screw all the way and thats the hard bit done. Then just lift the 2 spring edges with a flathead screwdriver and slot the blade in underneath 2:04

[@KingNeeno]

The quality was trash for me to see exactly what u did

[@MagicTheKrakening]

Still couldn't get spring back in. Ended up using 2 zip ties in the other two screw holes then I screw the middle screw in. Much easier this way.

[@jaewilkerson2397]

I promise u wasn’t lying about that rag…I was doing it without it then I heard u say it’s the step most ppl like to avoid but mane as soon as I used it it was so much easier!

[@TwinNem333]

Can you do another one?

[@theolyone723]

I do it looks fine but it moves left and right and it wasn’t like that when I first unscrewed it. I have no idea what I did wrong

[@acewinters3855]

Man just saved my life with this video

[@nhiathor8155]

My spring broke. Where can i buy one?

[@nhiathor8155]

@49 Keyz Beats Amazon don't carry any.

[@cappxd.6126]

I lost that small part is there any way tj geg jt back tigethrrv

[@jamesmorgan4596]

Honestly they made the spring holder bs on purpose. It's designed to fail so you have to buy replacement parts. It's a god awful design.

[@exotic_blastz651]

Really helps that I can’t see cause of the blur great job 👏🏼

[@MadeinDade47]

Love blurry tutorials, thanks!

[@alonzogodwin5907]

Where to get the spring for the clippers?

[@FadeMasterLos]

They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades

[@AirForce318]

Fellas an easier way to do this is to put the spring and the blade holder in place first. Then bend the prongs back on the spring and slide the blade in. The spring is strong enough to snap right back in place. It’s way easier and you know it’s right bc that spring instantly pops into place.

[@hugovalladares6919]

??

[@THEPPLZBARBER]

Facts

[@kobebladez]

THANK YOU DAMN ALL THESE VIDEOS I WATCHED …. all i had to do is read your comment

[@ramonposey1207]

this was so much easier !!!

[@ricardotorres525]

I did this way, and it's working bro, thanks, a lot easier. 👍🏽

[@monkey_ish4117]

Man I just did it but every time I turn it on, the red light goes on for a sec then nothing. And the batteries are full.

[@lexstel]

My dude I appreciate the video, it came in handy. I have a boost and it’s the same system.

[@ninjar4860]

would of been so helpful if I could see whatever the fuck you were trying to show in the most critical part of the reassembly.

[@masvidal.markez5527]

u know where i can buy the spring ??? please

[@FadeMasterLos]

They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades

[@neshia1111]

Yes 🙌 can’t our this thing back in ! Thanks

[@Lupegutierrezz]

You can’t really see anything you see most of your hands but the rest looks foggy didn’t really help me but thank you for sharing explain things very well😊

[@paulhudson8717]

Having the prob on my supermotor uk . It doesn’t have a spring holder

[@FadeMasterLos]

Uk trimmer are usually similar. Slightly different with power outlet.

[@paulhudson8717]

@@FadeMasterLos thanks for reply . I figured out in the end . There’s no screw that holds in spring it’s a case of just fitting spring into the holes and then snapping back on the unit while holding blades down firmly and screwing down .

[@TracyAshley-t5d]

Your video is unclear no help

[@SheenDolla]

Just saved me some money!!! Thanks

[@naitexvr4504]

The spring keep on popping out

[@devinsperry7520]

Same

[@Longenecker1776]

Yeah I’m having no luck.

[@OfficialGundem]

same

[@skinnyjess2451]

Much love brothers and sisters 🙏❤️

[@seliahernandez7389]

The video was blurry in a lot of parts and it was hard the see the details

[@Asseater-lp7dm]

This video saved me money

[@kristenstollar4932]

Thanks for the video where you can’t see any thing your doing 👍🏼

[@raghavbhutada9267]

Atleast show properly how to attach the spring, everything is blurry except the title

[@skinnyjess2451]

God loves every single one no matter what🙏❤️

[@CS1337]

Thank you 🙏🔥

[@CSMITHFLYGUY]

My spring keeps popping out every time I turn them on 🤦🏽‍♂️

[@ElCompaJesseOficial]

Happend to me had to get a replacement unfortunately

[@jrthebarber_91]

Omg ty so much bro this helped

[@cartro-]

i put it back and i jus bought my trimmers then it sounded bad

[@JohnnyDeaux]

i had to use two people....i hold the plastic holder piece down flat with two thumbs while the second person screws

[@GladiatorWC]

When recording, you should show what it is youre doing.

[@therockstarbarber68]

I love how you litterly can see nothing

[@SpecialDelivery12]

This was clutch af thank bruh.

[@rashun583]

Man thank you I almost brought a new blade 💪🏾🥶

[@Nathanael512]

Access? It’s excess

[@karamaacademy5954]

How can you use the clipper if the spring got lost

[@FadeMasterLos]

You must have the spring to use them.

[@pablitoways]

Gracias

[@tutholebicker-_-7905]

you got the camera all blurry on the main part

[@devinsperry7520]

Thank you king I was losing my damn mind

[@desmondmitchell5602]

Hell yea los I got it

[@slayuh]

THANK YOU!!!!

[@jamarflanagan4812]

In other words don't take that shit apart not worth time and effort.

[@FadeMasterLos]

Facts 💯

[@street13sp]

I was happy to find this video until I couldn’t see shit! Huh

[@robrealcuts]

Yo I still can’t get it bro

[@FadeMasterLos]

Which part you getting stuck on ?

[@jasonmoreno1895]

Same I’m hella stuck

[@jasonmoreno1895]

My metal part don’t lay flat when I put it down

[@robrealcuts]

@@jasonmoreno1895 I finally got it. You gotta add pressure bro

[@FadeMasterLos]

@@jasonmoreno1895 there not suppose to lay flat. The lay as if there a triangle facing up .

[@ItsLiRod]

Ts don’t work for me

[@EnzoVerdonck]

Thx you I love u bro

[@guiomarlopez6353]

Easyy????

[@parrking31]

Can’t tell with the blurry vision

[@Baycasso]

Video didn’t help as the rag did nothing lol. I managed to get them in by putting the piece that goes on the spring backwards loose enough to slide the spring under it. I turned those around to how they are suppose to face and lifted the springs with some scissors so I could put in the black blade. You do have to insert the spring is shown above in order for them to work properly again!

[@woo_shynen8805]

Lol got these babyliss fx skeletons a week ago and these motherfucking springs dont pop in🤦🏽‍♂️

[@anonymousperson4821]

You didn’t show where to put it back !

[@SoloStormz]

Bro this is a major F YOUUUUUUUUUU TO BABY liss bro ICANT EVEN USE THE TRIMMER AFTER TAKING IT APART TO SHARPEN IT THEY REALLY THINK THEY A FOREIGN CAR I FCKING HEATED YALL LUCKY IM NOT ASS OUT NOW I GOT 2.0s cuz THATS RIDICULOUS

[@skinnyjess2451]

God bless everyone 🙏❤️

[@bthebarber916]

Thanks, this shit was a pain

[@deldia]

Thank you for your efforts but this is one of the most painful videos I’ve ever watched. Can’t see a thing.

[@dwill0408]

Quality of that video is not good very blurry can’t really see

[@warava9780]

i will describe how to do it since this guy doesnt watch what he record and doesnt show anything , the easier way for me was to put the blade it self for half so it can easier be. so what you need to do is put the string inside where it suppost to be then the bart with screw you put on top of the string , so the string is under the thing you need to have some force then you screw the bolt in and it will work fine

[@emir0324]

Should be titled how to zoom your camera on your hands while I do something nobody can see

[@HiddenKey_210]

Appreciate it cuz! 💪🏾

[@C0nspiracyNy]

babyliss pros are absolute garbage, i bought 2 of them and the bullshit spring kept slipping out of position on both, they over complicated something that doesnt need to be that difficult to fix, the moment that spring comes out thats practically it for those clippers, unless you make your own makeshift spring to hold it in place. theres cheaper clippers on amazon that look like babyliss that dont even have that issue

[@camelio10]

The very thing you are showing is unfocused. Common bro

[@schwainerschinkler5664]

Great the hardes part wasn’t in focus

[@jasontamay228]

Jesus Christ thank u!!!

[@youngxmarvolous]

Excess bruh excess

[@FadeMasterLos]

😂😂😂

[@karlosblends]

Access hair lol

[@deshawnwilliams6290]

Video is to blurry

[@mikehelper997]

You guys need to know how to make a video because half the things you were doing was impossible to see and you took it away too quick please get somebody else to do your videos

[@RalfHome]

You video blurry af the whole time

[@A1Cuts-cw7ts]

can’t even see the thing bro

[@joseluisaguilarzuniga4071]

No grabas nada

[@tallard666]

3/4 out of focus impossible to see

[@breanamcdowell]

This was so blurry

[@rahiemmartin1724]

Whole video out of focus….why even post this?

[@MushiShiFuego]

😂😂😂

[@byronromero9416]

si ni se veee

[@davidross6954]

Impossible

[@thabrooklynfellah]

Comon man remake the video focus sucks