How to Quickly Install JIC or BSP Reusable Hose Fittings onto Hydraulic Hoses

A quick less than 3-minute Do It Yourself video created for our e-commerce Store Listings Specifically if you prefer to remove repair and or replace Hydraulic Hoses that have JIC or BSP Reusable Hydraulic Hose Fittings.
These kits are essential If you are operating in remote locations far from home be it on the Land or Out at Sea.
If you are in the U.S. get your reusables fittings shipped direct to your door from our Texas warehouse click the link below,
valvehalla.com/collections/featured-products
If in Australia grab a handful of these as they are cheap insurance if you blow a hydraulic Hose
www.hydraulic.online/Reusable-Fittings-for-Hydraulic-Hose-Straight-90%C2%B0-&-45%C2%B0-Elbow-Field-Fit-c30238252

[@michaelrowland2186]

Thank You so much for saying left hand threads!!! You saved me !!

[@Hydraulic.Online]

You are so welcome!

[@smca7271]

Ive bought (from you guys) and had great success for about 30 of these at 3/8".....but the last ones I bought 1/2" have leaked between the fitting and hose,on one hose only ,out of three (also a pin hole spray out of hose when dead headed,reliefs at 2000psi)....I redid the fitting and again leaks between fitting and hose (is the delivery hose from pump.....I know I'm not doing it wrong,could a faulty hose cause this,don't know what else to try....love your online shop,keep it going.

[@Hydraulic.Online]

You need to make sure that you are using "new" SAE 100 R2 Specification hose with 2 wire bodies, and new SAE 100R1 Specification hose with a 1 wire body. A "2 wire body" will have two thin rings or grooves machined onto the neck and a "1 wire body" will have one ring or groove machined into its neck. Also we do not recommend that you use Old or used hose to make assemblies as the rubber may have perised with age, temperature, and prolonged contact with oil. You should have been given the opportunity to download assembly Instructions when you placed your order. Please let us know if you continue to have issues.

[@m7874m]

Can these be used as a permanent repair?

[@Hydraulic.Online]

Yes when used with new hose we have seen these last many years. When used on a damaged hose or older hose it is better that you change out to a new hose as soon as convenient to you.

[@casualpeen]

great video. I love you showed to leave some gap on the inside for expansion.

[@Hydraulic.Online]

Thanks for the feedback, was it helpful?