How to Read P&ID Drawing - A Complete Tutorial

[@HardHatEngineer]

Get 20% off on my Full Course on " *How to Read P&ID, PFD and BFD Used in Process Plant Like Pro* " Check here - learn.hardhatengineer.com/YTCPID Test Yourself, take this 10 question quiz on P&ID - learn.hardhatengineer.com/ytpid

[@albertg9557]

I watched this video when I got my first job in the chemical plant as an inspector. I’m here to say the best way to learn is to actually go out in the field and practice. I use to print out P&IDs to whole systems and walk it down on my free time. Hands on experience is key.

[@march11stoneytony]

Do you have any actual P&ID's you can share? Looking for work now but hoping to hit the ground running

[@albertg9557]

@@march11stoneytony I’m sure I have some somewhere.

[@march11stoneytony]

@@albertg9557 Thanks for the reply. If you could share any I'd greatly appreciate it.

[@albertg9557]

@@march11stoneytony how do I contact you?

[@march11stoneytony]

@@albertg9557 I've left my email a couple times but KZbin automatically deleted my comment

[@jaykesapalaran5434]

WOW 😳, very much informative and easy to understand. Thank you for the knowledge that you share ❤️

[@karlalee2199]

Thanks for such good explanation. But mostly to use the real phrase instead brief will be more useful even say brief . Eg, say Product Flow Digram while mention PFD

[@andrewm0960]

Thanks bro I'm an instrument fitter but I rarely get the p&ids so watching This vid makes it easier to understand, I'll sure will buy your course to be good at reading this p&ids thank you 🙏

[@fodic6021]

Watch P&ID video using EdrawMax at @FODIC kzbin.info/www/bejne/oHndiouNZddjd7c

[@tjalappuzha]

Very useful video ... Thanks

[@abdessamedghettas7167]

Thank you for such valuable video.

[@danielconsidine3863]

If the fluid in a tank was cooler than it should be, what would you look at for possible causes?

[@InstrumentCalibration]

Great Video. Thanks for sharing !!

[@RESTRAINTS1]

fantastic explanation...

[@NanaNini313]

Good Video on P&ID...really helps me

[@ragesh166]

Great job sir thanks

[@Tony_Musante]

Congratulations! Good explanation. I follow you from south america. Just in case, do you have material about piping? I am interested in static and dinamic stress.

[@fodic6021]

Watch P&ID video using EdrawMax at @FODIC kzbin.info/www/bejne/oHndiouNZddjd7c

[@saranyadevi6468]

Very wonderful message sir

[@shaileshdesai733]

Interesting. I was Piping Engineer, Worked for Bechtel in San Francisco.

[@HardHatEngineer]

Thanks Sir, If you want to share your knowledge on piping, please let me know. I will host your content on my website. So that you can share and help with your knowledge to others.

[@talgatshinzhirbekov2584]

Great and easy explanation, thank you!

[@IMTIAZALI-yy9gj]

please explain in detail about Mechanical Seal called as the Dynamic Seal and Static Seal with uses examples according to their service and Pressure ....your videos is so informative so nice work ..

[@GemmyHeart]

Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material. Free technical support (sealing, heat preservation, heat insulation, fire prevention problems) All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere.

[@G3le4h]

Ty so much

[@Mr.XYZ6775]

I would really appreciate it if you could do a diagram of a hydroelectric generating system. Just the hydro piping please.

[@dharampatel3955]

Great bhai 👍🏻 tame aagar ne aagar vadhta raho. Also, Chemical Engineering na Funda pan clear karta rehjo bhai. I heartfully appreciate this.

[@HardHatEngineer]

Thanks.

[@imtiazali-rd9ug]

Dear I have Question with you, How we can murk Hydrocarbon Line (HAP/VOC) In P&ID? I'm working in oil and gas industry but don't how i can't murk Hydrocarbon Line or Stream value calculation.

[@tasadduqmajeed68]

Very good tutorial and very calmly explain.

[@enoedohoeket6972]

Thanks for the information and clear explanation of the system

[@HardHatEngineer]

Glad it was helpful!

[@fodic6021]

Watch P&ID video using EdrawMax at @FODIC kzbin.info/www/bejne/oHndiouNZddjd7c

[@nadhir123456]

Good job Sir thanks for sharing your experience with us

[@251631ful]

Please let me have the video asnd more of them .very educative indeed.

[@ashton3616]

I had to watch this video for a class and it was probably the most boring video I've ever watched, which is unfortunate because it's very informative and detailed.

[@HardHatEngineer]

Ha...ha... Sorry and thanks. Please share my videos with your friend and colleague. So that they also gets bored and informed. 😅😆

[@mohamedmusthafaa5647]

Very each Coach given, 👌

[@WaleedAlHatmi-hd4nv]

Please explain this drawing Pipeline alignment sheet

[@realflowjon7794]

Thank you good helpful

[@akshaycharan90]

Please sir.. Ek request hai.. Pressure vessel aur oil storage terminals ke upar ek video banaiye plzz.. As soon as possible.. By the way great video... U helped me a lot in learning p&id in more better way

[@dhasuvideos273]

Very good sir

[@wismantosetyadi2323]

Thanks Sir

[@samirmondal4301]

Very very good

[@daizbrahim1378]

Very interesting lesson thanks

[@KannanKannan-yt9el]

So good

[@fatimajahangir9073]

Very Helpful and concise. GREAT WORK. thanks a lot

[@rishadkarimov5447]

Great, very clear explanation!

[@Love_above_hate]

The actual video starts @ 5:17

[@rustamosm869]

Thanks for saving our time!

[@miguelbustos8274]

EXCELLENT

[@tdeepak5805]

Thank u bro

[@copievillamaria]

Sir, aren't Normally closed valves marked black inside?

[@hdadam203]

Thank you so much

[@machanneil12345]

Awesome man

[@FuryKarRar]

please make a video on all documents and drawings required in the fabrication of pipe, pressure vessels, and tanks a Q.C engineer need

[@sir9129]

Stream flow must be mentioned in PEFS. This is very important.

[@HardHatEngineer]

True

[@Enayatmauna]

Please upload one more video which in Explained From your side How can I find Blind in P&I'd please upload sir I need .. thanku sir

[@nunoeusebio8244]

Do you know which are the deliverables of a FEED (process plant)?

[@HardHatEngineer]

Yes, I do, will create video in future.

[@ademolagoodlukaransiola507]

Very good lecture

[@lalitabisht737]

Can you provide Admin Training of SPPID?

[@devindernath45]

thank you sir

[@HardHatEngineer]

Most Welcome, keep sharing.

[@pratikkasabe1232]

Sir, can u provide some tutorial on PDMS?

[@lindonlezama6916]

Need to see more videos

[@afsanej]

please tell me what is SFS on p&id? i have no legend

[@rambhuvanabavi]

Thanks bro

[@Ls_light]

Sir,by Saying process condition and physical data are not included in P &ID does it means it does not show temperature , pressure at which we want to do the reaction.

[@HardHatEngineer]

Yes, Process data will be given in the PFD.

[@hassimessaoud9853]

Excellente vidéo

[@archanakprakash3964]

Can u please make a video on separator sizing,both vertical and horizontal?

[@vishnuprakashr]

VERY HELPFUL...THANKS

[@albertorodriguez6287]

Thank you!

[@theblackboard8570]

Very well explained..!!!

[@gerryalan6715]

thank you ! please more vidéos..

[@HardHatEngineer]

I am infected by procrastination virus. So will add more videos when I am recovered. 😀

[@sahilkadam9737]

Thabk you

[@firmanst8349]

What software do you use to make a P n Id sir?

[@HardHatEngineer]

It is outsource to draftsman.

[@vijayamale8029]

Hello sir , please provide lectures on heat Exchanger Piping pump piping , Rack piping, tank farm piping column piping routing , please sir I have to learn these all

[@mohammedameeruddin3445]

Any discount coupon codes wanna buy the course!

[@HardHatEngineer]

Use "Ebook" to get 20% off

[@Curious_MindTV]

Dear Varun, I purchased one of your courses but it's not available in my courses. Why? Thanks for your support.

[@HardHatEngineer]

Check your email

[@Curious_MindTV]

@@HardHatEngineer Thank you. I received an excellent support 🌟🌟🌟🌟🌟

[@doraikarthikeyan2659]

please send the link

[@navnitpatel9410]

If any device or instrument removed permanently from plant than how to indicate correction in p&id

[@HardHatEngineer]

You have to update P&ID accordingly.

[@ajaykatroj7565]

Please explain column layout and it's piping considerations..

[@narasingk6630]

How to given injection point identification in P&ID

[@HardHatEngineer]

I think it is shown just as any branch connection with flange.

[@nanayyaw622]

Please can you recommend any software that can used to draw such flow sheet?

[@HardHatEngineer]

Microsoft Visio

[@nanayyaw622]

@@HardHatEngineer Ok, thank you.

[@fodic6021]

Watch P&ID video using EdrawMax at @FODIC kzbin.info/www/bejne/oHndiouNZddjd7c

[@louiedupaya4140]

Do you have soft copy to download

[@HardHatEngineer]

check my website - hardhatengineer.com/how-to-read-pid-pefs-drawings/

[@nagendradubey586]

share me more detail for P&ID drowing

[@mohammed_assam]

if I buy your course will I get a certificate also and course fees ??

[@HardHatEngineer]

Yes, check my website hardhatengineer.com

[@rajendrawaghmare1223]

very helpful thank u

[@laftiskuno1357]

thank you very much.

[@arun4846]

Tha ks sir ❤️👍🎉

[@dillikumar7970]

What is the software for p&id for draw the p&id?

[@caligula2456]

AutoCAD P&id version

[@silver-gs8ne]

What standard do p&id follow ?

[@HardHatEngineer]

There are few ISO and British standards available that provide symbols and best practices to draw PFD and P&ID such as, ISA S5.1, BS 5070, and ISO 10628.

[@ALFURQONTAWABI]

Great vidio

[@sourabhg5418]

What are the inputs for a P&ID design engineer for design of a system? What is Balance of Plant?

[@HardHatEngineer]

Check this - hardhatengineer.com/how-to-read-pid-pefs-drawings/

[@sourabhg5418]

@John Patriot eagle freedom boner I am going to tell my children someday in future - choose life not engineering. He he he

[@sourabhg5418]

@John Patriot eagle freedom boner Its an office joke off course.

[@sourabhg5418]

@John Patriot eagle freedom boner I am thinking of BOP in reference to steam circuit in thermal power plant

[@sourabhg5418]

@John Patriot eagle freedom boner Why so serious john. Everyday, there should be fun time too.

[@Syedfendi]

Yes, i would like to have copy of this video and similar videos

[@HardHatEngineer]

Hi, I have full course on How to read P&ID. You can check it here courses.hardhatengineer.com

[@9907007013]

How to search pdf instrument tags if it is in two line

[@Bhanu_Prasad3105]

Well explained

[@RajuKumar-cd2yp]

Sir plz make video for pipeline (hdd)

[@venkatsasi6706]

Bhai I loved your videos very helpful to us but can you help me with isometric drawings I don't how to draw please do one video on piping

[@emmanuelbrown3520]

Pls kindly link me to your totural

[@amirjamal2598]

I am purchase your course but i face problem in payment mode but i am presently in Oman

[@HardHatEngineer]

Contact me at [e-mail]

[@isq_99kgb36]

Thank you

[@benjaminakotia1768]

I am interested in the full tutorial.

[@HardHatEngineer]

Check my website

[@georgeendrikusuma9023]

great !

[@mohammedsalihc8023]

Pls upload more safety related videos

[@HardHatEngineer]

Will try in the future.

[@JoseAntonio-sn6sf]

which software do you use for elaborating P&ID?

[@HardHatEngineer]

Screen Recording through - Camtasia

[@alexandru9917]

Usually Autodesk.Autocad.P&ID

[@fodic6021]

Watch P&ID video using EdrawMax at @FODIC kzbin.info/www/bejne/oHndiouNZddjd7c

[@SenthilKumar-gu3oc]

Please explain dilute phase conveying system

[@HardHatEngineer]

Will do in future. Please share my videos with your friend and colleague.

[@SenthilKumar-gu3oc]

@@HardHatEngineer sir, i have one doubt, one air blower connected to one silo and the same silo vent air given to another conveying line if it is possible?

[@akki1803]

Please mention the relationship PFD to PID & MSD

[@HardHatEngineer]

Will do in future videos

[@ramkumarsr1588]

Im Ready to Buy a Course from ur channel, But Just Clear it,What is 30 Day Money Back Return , I mean it, after Completion of Course, The Money will return to my Account,Its Correct ???,Pls Reply

[@HardHatEngineer]

If you don't like course, get you money back within 30 days. After 30 days no refund.

[@mdwaliullah6504]

❤❤❤❤❤

[@pvsinan]

From where i get the complete video??

[@HardHatEngineer]

This is complete video, You can check my full course on P&ID courses.hardhatengineer.com

[@imtiazali-rd9ug]

Your video very helpful for me. I'm work as a Environment Engineer in Refinery. I'm work according to P&ID . Our Team leader Colour the lines of P&ID according to Steam. My Question is How we Know what is inside the line (Gas,High Liquid, lite Liquid) Our Team leader not Tell us. Can you help me about this Topic. Thanks

[@HardHatEngineer]

You have to check the line list where all details of service is listed against the line number

[@anoopkurian6635]

in line number itself give the service detail eg : 8"-DW-454-1444 means its Drain Water Service

[@imtiazali-rd9ug]

@@anoopkurian6635 Thanks Brother I want to discuss with you about this Topic. can you give me time ?

[@HardHatEngineer]

@@anoopkurian6635 Most probably yes (It may be De-mineralized water, check line is connected to drain than drain water is ok) get the line list where you will find all these details. or ask your TL to give P&ID legend sheets.

[@anoopkurian6635]

@@HardHatEngineer You said right sir, I just want to say that if you want to know about the service of line, we can find it from the line number itself, Or if u want to know the details of design parameters then u have to check with line list