How To Read Rigging Schematics Of OcCre

  Рет қаралды 10,885

John Aliprantis

John Aliprantis

Күн бұрын

Пікірлер: 64
@mikegibbons4294
@mikegibbons4294 Жыл бұрын
Hello John. I built my first ship (the Albatross) and enjoyed the process very much. One of the critiques I had was that I found that understanding the rigging diagrams was a bit of a challenge. Oh how I wish I has known of this video before tacking the task. Even though I was puzzled at times in completing the task I was able to see the logic in the schematics. Certainly there were a few things I got wrong but I completed the model successfully. Your video confirmed many things to me and also educated me in the areas where I struggled. I have bookmarked this video and plan to use it as a reference as I tackle my next model, The Essex. Thank you for you clear and thorough explanation to decode the schematics. You have performed an excellent service for those of us new to OcCre models.
@JohnsWoodenShips
@JohnsWoodenShips Жыл бұрын
I am glad that i was able to help Mike!!! Welcome aboard this beautiful hobby! Take your time to check out the full series that i have made, i believe that you are going to like some of them and if you need any help with your build just ask me :)
@richardbarriere4683
@richardbarriere4683 2 жыл бұрын
Thank you for all your videos John. It's extremely hard to find someone go through the whole process of making a model ship.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Thank you very much for your kind words Richard!!! In this hobby the ones who know how to build a wooden model ship, are keeping the secrets for their selves. I don't :)
@TheSuperEverests
@TheSuperEverests 2 жыл бұрын
Hi John, absolutely fabulous, cannot tell you how much I have learned...thank you for the time and effort you put into this, I'm sure everyone has benefited. And yes John... I have watched your Santisima trinidad unboxing many times... I think around 27 in all.... 😊... And why not... It's the most perfect unboxing video on youtube.... Thank you again my friend....
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Hi Markos! I am glad that you like it, after all it was your idea :) Thank you again!!!
@richmondtigers7495
@richmondtigers7495 2 жыл бұрын
This was fantastic, I do not understand why do they not make the instructions easier to understand for beginners.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it was useful! They are simple, believe me, if you ever happen to see instructions from Corel you will know that those are simple :)
@richmondtigers7495
@richmondtigers7495 2 жыл бұрын
I have this kit and was really struggling with interpreting the reason for the two numbers, so your video was so helpful. Corel, they seem to have very bad reputation.
@davidfeinberg5599
@davidfeinberg5599 2 жыл бұрын
Thank you John for once again taking what was challenging for me and making it simple. You are enjoyed and appreciated. Be well.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Thank you very much David!!!
@damianj82
@damianj82 2 жыл бұрын
Fabulous my friend, we all need this kind of video, waiting for more, because you have a lot of expirience , love this, thank you John.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad you enjoyed it my friend!!! Thank you very much!!!
@zjiep111111
@zjiep111111 2 жыл бұрын
Thank you very much for this clear explanation. I am sure it will help me a lot finishing my HMS Bounty. It is my first model ship, so I still have a lot to learn.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
You will learn in no time, just don't be afraid to make mistakes :)
@markroberts1324
@markroberts1324 2 жыл бұрын
Great video John. Thanks for explaining the drawings as I am just starting the rigging of the Endurance and definitely needed that advice. 👍
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
I am glad that i was able to help Mark!!! :)
@genojoe3176
@genojoe3176 2 жыл бұрын
This tutorial is amazing! You have answered so much and clarified the rest. Again, thank you!!!
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it was helpful!!!
@GregWilson635
@GregWilson635 2 жыл бұрын
Excellent video John , I will be starting the rigging on the Trinidad soon and this will be very helpful.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it helped Greg!!!
@paddyohare1223
@paddyohare1223 2 жыл бұрын
Great video John, thanks for going through all this detail.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad you enjoyed it Paddy!!!
@buckchoppers2480
@buckchoppers2480 2 жыл бұрын
Thanks, John. I found some of the rigging diagrams a bit confusing when doing my first model ship. Once you understand them though the whole process is quite straightforward.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
It is not hard as soon you get the idea of how it works. I have seen the same style in schematics in many companies :)
@davidjed6948
@davidjed6948 2 жыл бұрын
Very instructive video, John. Thank you.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it was helpful David!!!
@S_MannMann
@S_MannMann 2 жыл бұрын
Very very HELPFUL!! Thanks for taking the time to make this video! (Regards to Buddy!)
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it was helpful!!! I will give him a big hug for you!!!
@andrewdonald4046
@andrewdonald4046 Жыл бұрын
Hi John I’ve thought a good video may be how to tie the various knots on yards, to sails, to blocks etc etc
@JohnsWoodenShips
@JohnsWoodenShips Жыл бұрын
It is a great idea, i have that in video in each of my series but in each step. Maybe i should get the knots all in one video. Thank you for the idea!
@ludovicdebeuckeleer9266
@ludovicdebeuckeleer9266 2 жыл бұрын
again a verry interesting topic John, thank you.
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad you enjoyed it!
@StandByShields
@StandByShields 2 жыл бұрын
Thanks for the instructional video!
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it was helpful!!!
@michaelryan6884
@michaelryan6884 2 жыл бұрын
Very helpful, John....thank you!
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Thank you very much Michael!!!
@chrisbarber5842
@chrisbarber5842 2 жыл бұрын
Very helpful video thanks for the information
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Glad it was helpful Chris!!!
@TheSuperEverests
@TheSuperEverests 2 жыл бұрын
Hi John Can I just ask, is all running rigging duplicated on both sides of the Ship?
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Hi Markos! No not all, there are the vertical sails between the masts and also the vertical sails on the bow and the stern.
@nickpearson111
@nickpearson111 8 ай бұрын
Thank you that was resally helpfull
@JohnsWoodenShips
@JohnsWoodenShips 8 ай бұрын
Glad it helped!
@gbresaleking
@gbresaleking Жыл бұрын
I have been a frame carpenter and construction superintendent most all my life, I can read blurprints for huge commercial buildings no problem but these are like alien manuscripts to me lol
@andrewdonald4046
@andrewdonald4046 Жыл бұрын
Thanks very much John. Now I can pretend I know what I’m doing😂
@JohnsWoodenShips
@JohnsWoodenShips Жыл бұрын
Glad to help!
@fernandomanuelperez
@fernandomanuelperez 2 жыл бұрын
Gran trabajo, por favor ¿no se podría traducir los subtítulos?
@fernandomanuelperez
@fernandomanuelperez 2 жыл бұрын
es que pone subtitulos no disponibles
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Thank you very much Fernando! I do not know how to put on subtitles, never the less how to translate them in Spanish or in another language. Sorry for that. If you know a way i would be happy to hear it :)
@danielefelix6983
@danielefelix6983 2 жыл бұрын
Grande aiuto ma è lo stesso un casino... :) le istruzioni della occre sono più difficili o più facili delle altre?
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Many other companies have instructions with the same way. But OcCre's are a bit more easy to understand.
@marcellogemignani6714
@marcellogemignani6714 Жыл бұрын
Hello Jonh: ho solo chiesto, se fosse possibile, avere in lingua italiano, le tue recessioni: anche con sottotitoli, nei tuoi video.( es. How to Real Rigging Schematis Of Occre ) X favore, mi puoi rispondere, in italiano?????
@JohnsWoodenShips
@JohnsWoodenShips Жыл бұрын
Hi Marcello! Unfortunately i speak only Greek and English. I wish i could do that but i can't. The following has been auto translated in Italian : Purtroppo parlo solo greco e inglese. Vorrei poterlo fare ma non posso.
@cajunrandy2143
@cajunrandy2143 2 жыл бұрын
nautical name for the rope ladders is shrouds
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Thanks for the info :)
@cajunrandy2143
@cajunrandy2143 2 жыл бұрын
@@JohnsWoodenShips welcome !
@mikenielsen8738
@mikenielsen8738 2 жыл бұрын
🙂
@marcellogemignani6714
@marcellogemignani6714 Жыл бұрын
Magari, sarebbe meglio con i sottotitoli, disponibili, in più lingue........non sarebbe una ottima, idea????? GRAZIE.
@JohnsWoodenShips
@JohnsWoodenShips Жыл бұрын
It is very hard to make subtitles Marcello, if you have any questions please fell free to ask me :)
@konstantinosskodras1625
@konstantinosskodras1625 2 жыл бұрын
Αναφέρομαι γιά τό Endeavour occre
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
Και ποιο ακριβως ειναι το ερωτημα σου Κωνσταντινε?
@konstantinosskodras1625
@konstantinosskodras1625 2 жыл бұрын
@@JohnsWoodenShips Γειά σας , στό endeavour occre ,στά πλάνα 1/1, Main mast & fore mast , σχέδιο Β , στήν αριστερή εικόνα τού καταρτιού , στό κάτω μέρος του καταρτιού έχει μία τρύπα Φ1mm πού δέν καταλαβαίνω σέ τί χρησιμεύει. Άν μπορούσατε νά μέ κατατοπίσετε γιά αυτό. Σάς ευχαριστώ Κωνσταντίνος Σκόδρας
@JohnsWoodenShips
@JohnsWoodenShips 2 жыл бұрын
@@konstantinosskodras1625 Το εχω δει σε πολλα μοντελα, οταν περνας τα σχοινια εκει περνας το σχοινι σχηματιζοντας 8αρι με το μπροστινο μερος του καταρτιου. Τωρα που χρησιμευει ,δεν εχω ιδεα ☺
@konstantinosskodras1625
@konstantinosskodras1625 2 жыл бұрын
@@JohnsWoodenShips Σάς ευχαριστώ γιά τήν ανταπόκριση στήν ερώτησή μου.
How To Make Cannon Coils
10:51
John Aliprantis
Рет қаралды 3 М.
HMS Endeavour - The Making Of
19:04
John Aliprantis
Рет қаралды 12 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
San Felipe - part 42 Making The Lanterns
35:17
John Aliprantis
Рет қаралды 828
Rigging, sails and sea - part 03 of building the HMS TERROR from Occre
10:29
TOMs Modelling in Motion
Рет қаралды 161 М.
Montanes - part 81 Tying Deadeyes
26:45
John Aliprantis
Рет қаралды 11 М.
How to do ratlines using the clove hitch
21:16
RJ Scaleships & Replicas
Рет қаралды 40 М.
77.ВАНТЫ(установка)/SHROUDS(setting)
15:00
How an 18th Century Sailing Warship Works (HMS Victory)
25:27
Animagraffs
Рет қаралды 11 МЛН
Model Building, Using A Rigging Tool
8:00
The Model Shipwright, Paul Lester
Рет қаралды 26 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН