How To Rebuild or Clean Carburator 4 stroke Tohatsu Niss Mercury Outboard 4HP 5HP 6HP motor outboard

[@billmoore4554]

One of very few videos on cleaning these carbs that shows the idle jet. Very thorough!

[@AnotherHobby35]

I watched this video because I have the newer version of this engine and my caburator was not working properly. Watching you disassembling this carburator made me see how easy it is to do it yourself. Now 2 hours later including buying the carburator cleaner and spark plug my engine is running as new ! thank you sir.

[@johnbrianneary8844]

Thanks for the video. Small learning curve makes it quite easy after the first attempt. Had a gummed up carb on a 6hp Tohatsu, despite draining the bowl over winter. Cleaned the main jet with a steel wire strand, which allowed it to start. But could not idle. As there is no jet to clean, but a circuit, I left it soaking in White Spirit. Morning after resulted in a telltale mucus residue at the bottom of the container. Voilá, runs like new.

[@tiberiu_nicolae]

Thank you mister. I followed your video and managed to do it myself. Thank you very much once again

[@AbReam]

This is the most perfect how-to video I’ve ever seen.

[@SteveSeas]

Thank you for posting this video. I am the least handy person on earth and you helped me do this. I swear KZbin is like that machine in the movie "The Matrix" that uploads information into people's brains. Great video!

[@delcoleman7121]

Stephen Navarrete, how dare you assume you are the least handy person on earth. I've held that record all my life and can't imagine ever relinquishing it. Yes, these video's are a life saver for us dim wits.

[@solosailorsv8065]

Thanks for reminding me of where all the TINY holes are ! BTW, Set the float to be parallel with the housing when inverted. by gently bending the tab, only if needed

[@kwitee]

Thanks for the video. The bolt you unscrew at 5:30 is corroded on my carb. A bit broke off as I tried to loosen it. Do you happen to know how I can get a replacement part? Thanks!

[@kennethkinross2290]

Go to Boats.net they have online parts books for Tohatsu by Year, Model, and Horsepower. Great illustrated parts breakdowns and part numbers.

[@dexter2433]

also stop using fuel with ethanol in it as it is the worse thing ever for a boat motor .....try and find a ethanol free fuel if can ...I know some time you have no other choice but if can use ethanol free fuel ....

[@J-Justice666]

That bolt is actually a jet -The Main Jet.. The long skinny one he takes out is the slow jet. He's uses a tiny peace of wire to clean them out.

[@plobezuki]

A man needs no words.. Thank you!

[@kentowakai1234]

Gracias Senor, su ere lo mejor.

[@455ur3]

At the 2:25 mark, something fell out when you pulled out the carb. What was it? Same thing happened to me today and I can’t find it and it’s driving me crazy. Thanks for your help I’m advance.

[@coccobill7982]

I think it was the bushing that sits in the holes i the flame supressor where the 2 bolts goes through, that holds the carb with the flame supressor to the engine. They looks like a short piece of alu pipe. The right one fell out. If you cant find it, the motor will work just fine without it.

[@jimmatt8005]

Great video . Thanks for sharing.

[@marcellvisball]

Great video. My needle is stuck I unscrewed the top but it is not coming out. Is it possible to push it from the inside of the vent?

[@artemas33]

Prolly got it by now but soak it in gumout or other carb cleaner.

[@dalesdingen]

I see that you opened the airbleed-screw cover. Did you change the setting of the airbleed screw! Ritcher/Leaner?

[@HoangTran-ek3to]

Hi. You don't need to change any just open and clean up every thing like me and replace it will work like new thank you.

[@dalesdingen]

@@HoangTran-ek3to yes but mine is new. Tohatsu. I think it runs a bit lean at idle. I want add more fuel on idle.

[@nelsontaggart]

What is the wire being used?

[@HoangTran-ek3to]

Hi. I don't know what is yopur question thank.

[@nelsontaggart]

@@HoangTran-ek3to sorry what gauge wire are you using to push through the pinholes?

[@HoangTran-ek3to]

@@nelsontaggart Hi. That not electric wire it is the metal cable thank you.

[@richardlarose8863]

Gracias. Algien mas noto los aguacates. Saludos desde Canada

[@richardhohenberger2072]

When he had the float bowl off he never removed the main jet to clean it??? (center of carb)

[@HoangTran-ek3to]

Hi don't need it just clean thank you.

[@HoangTran-ek3to]

Hi, this video it working for rebuild or clean if you want your carb like new please replay the hold kit if not just clean up that it thank you.

[@womackke]

yes he did

[@pauls466]

The idle jet should be claened from the tip up (0,35mm), not from the side that you tried to . But I still like the video .

[@jia810]

Second that. That idle jet causes idle problem because the hole is so tiny and it is easily clogged. It should be cleaned with thinner wire.

[@nelsontaggart]

Can you tell me how skinny that wire is?

[@ltclaw392]

Anh o so cal ha... Toi can nguoi xua outboard cua toi. May nho

[@kentowakai1234]

never seen an avocado tree before

[@tonescott414]

no talking? thumbs down