HOW TO REFILL BROTHER TN-1030, TN-1050, TN-1090 TONER REFILL AND RESET, RECARGA, ЗАПРАВКА

BROTHER TN-1030, TN-1050, TN-1090 toner refill video.
Compatible with printer models:
BROTHER DCP-1510
BROTHER DCP-1512
BROTHER DCP-1610WE
BROTHER HL-1110
BROTHER HL-1112
BROTHER HL-1210W
BROTHER HL-1212W
BROTHER MFC-1810E
BROTHER MFC-1910W
BROTHER DCP-1622W
BROTHER HL-1222W

[@Defcon2000]

Thanks, very interesting! For viewers who want to repeat these steps I'd like to point out though that I wouldn't use a "normal" vacuum cleaner for this (it might blow the fine toner dust all around your apartment). I would either use a special toner vacuum cleaner - if you own one - or go outside, put the toner cartridge in a plastic bag and shake the old toner out of the cart and into the bag.

[@TonerRefillVideos]

The toner is not supposed to be processed with normal vacuum cleaner.

[@lenslens7379]

What brand is the power? Universal powder is suitable?

[@TonerRefillVideos]

Using an universal toner powder is not the best solution. If you use the universal powder, it may cause printing problems/defective printouts. I recommend using dedicated powder. Using an universal powder is at your own risk ;)

[@subchan6595]

what was the purpose of the second step where you unscrewed the black casing ? I'm not sure if I saw what you did correctly but you seemed to turn the starting position of the small white plastic wheel back 15 degrees. Is it like a resetting that needs to be done every time one refills ? Thanks in advance.

[@TonerRefillVideos]

The purpose of the second step where I unscrew the black side cap is to turn the reset gear (the white plastic wheel) in starting position (2-3 cogs of it to be in contact with the nearest gear). And yes, the resetting must be done every time you refill the cartridge. Good luck! :)

[@subchan6595]

@@TonerRefillVideos Got it - can I get your advice then on some powder toner which is available here in Budapest. The link below of some of this powder for sale at a nearby shop says that this black toner is good for Samsung and Lexmark. Can I use this for my brother HL1112E ? www.patronbolt.hu/tonerpor-100g-black-fekete-samsung-lexmark-epson-p8988.html Secondly, after emptying the cartridge to begin with, with a vacuum nosel, not being able to see inside where the powder goes and not being able to therefore know when its full, how many table spoons should I drop in of the new powder approximately ? Thanks again.