HOW TO REFILL DIY XIAOMI FOAMING HANDWASH DISPENSER

I have received a lot of questions on how to refill this machine, after several attempts, finally was able to perfect it. dont mind the dents on the cap, just be careful not to break the teeths inside the cap.
xiaomireviewph/
#GadgetGang
‪@TopDownTech‬ ‪@SulitTechReviews‬

[@mymc4life1]

Thank you so much for this tip!!! I bought a lot of these dispensers for Christmas gifts, i needed to refill mine but didn’t want to break the top cover. I’m glad i found your video and now im forwarded your video to everyone i gave this dispensers to 😁

[@rajievranjansingh220]

Really nice and easy to follow tip. Was able to refill on my own after watching the video

[@lysiew]

the zoom in part to see where to screw and cap it back is especially useful from this video. I just did my refill perfectly and it's easy, thanks for the video

[@aniruddhsali]

Opening the lid for the first time is tough, but afterwards is it easy to remove? Or you have to struggle the same way as the first?

[@riveravenergioa.9409]

Salamat sir richmond tan makakatulong to sa madami

[@nimrodegina5547]

Indeed a very useful info 👍🏻

[@clodremodo274]

Tipid tips sir...👍 nice 1

[@rogerjimenez07]

Worked great, thank you!!

[@btnbiker]

A flat side of a dinner knife will prise off the top. Most liquid soaps are thicker than shown here so 100 MLS and top up with water or 1 third to 2 thirds. Many sellers if Alixpress now sell the empty bottles and caps cheaply if you damage yours

[@Devijg]

Every handsoap will work with this machine: 1 part soap 2 parts water Put the cap back on, shake a little and you will have the best foam ever till the end without having to shake it now and then. Good luck 👍🏻

[@MrJatinder44]

Good Job! Thanks

[@ronnygarrourena7813]

💯 Thank you very much!

[@angelicagracecapacia8322]

very informativeee

[@cutecat1440]

Good afternoon sir Richmond!

[@johnpaulodtojan7725]

very useful Xiaomu NumbaWan

[@shrisuyash6714]

thank you so much...

[@aldrinpaulebron6533]

Too risky if the sealed cap got wrecked, just open carefully, but thanks sir Richmond by giving some tips (Tipid). This was useful specially this pandemic struggles. Stay safe everyone.

[@carmelolevi7417]

You prolly dont care but if you guys are bored like me during the covid times then you can stream pretty much all the new movies and series on instaflixxer. I've been watching with my girlfriend for the last few months xD

[@corbinadam9374]

@Carmelo Levi yea, I have been watching on instaflixxer for years myself :D

[@eugeniomatias4749]

Super Tipid tips 😎

[@trishab9300]

Thank you!!!

[@jun-junbaccay]

👍👍👍

[@prasathvishnu]

Very nice useful video - really 3 packs of refill is 599 rupees - they made these tanks non-refillable just to ensure we can buy these refills ONLY from them.

[@Orlanzepol123]

You’re right about that. I don’t like when businesses to things like thsty

[@cutecat1440]

Re-watched

[@ViciousZee]

Thank you for the video. I did it successfully, but the plastic is slightly damaged and I won't be able to repeat this too many times. Need to be tooo gentle with it, to not damage it. My thought before I saw the video was, to make a small hole on the top part of the soap container, from where I can refill it. And it should not be a problem after that, because this hole will be on the top, and unless someone turns it upside down, it should be fine. + it will be screwing-unscrewing the way it was meant. I like the idea mentioned by Paule Paul about getting the container with the lid stuck on the upper part. After opening it with a screw, when I was screwing it back, I accidently made it stuck in this way, which seems to be another easy solution. Only downside is hard to get it back together without taking out the lid, that's stuck on top and putting it back on the lower part...

[@1lubo1]

you can make a hole and use that little silicone plug to cover it. You can also use a syringe to refill it, if it's too small. At least that's what I'm planning to do, when I run out of soap :)

[@n.kk.]

Thank you

[@ex2ex2ex2]

Thanks

[@paulepaul1910]

There is a much easier way. You turn the upper part onto the lower part once and then move it a little further. This way, only the container comes off without the lid. That's how I did it with four pieces. Actually by mistake, but it works perfectly. Maybe make a pencil mark on the back beforehand, otherwise it's a bit fiddly to get them back into position.

[@peterjohnsoncastro0407]

Can you explain it more briefly....??

[@paulepaul1910]

@@peterjohnsoncastro0407 The upper part of the soap dispenser and the lower part (which contains the soap) can be screwed open and closed so that they are connected to each other. Just keep turning in the direction to close until it clicks or until it keeps turning without resistance. Now you can separate the upper and lower parts. The lid with the tube from the soap tank is now stuck in the upper part of the soap dispenser. Now you can easily refill soap because the lid is stuck in the upper part. Make a pencil mark on the back beforehand, otherwise it's a bit fiddly to get them back into position.

[@peterjohnsoncastro0407]

@@paulepaul1910 keep turning in until click or no resistance???? Its kinda scary to keep it turning in because im thinking it can damage the inside part of the dispenser. Make a video please hahahha

[@paulepaul1910]

@@peterjohnsoncastro0407 Don't worry, the likelihood of you breaking anything is very low. I have already done this with four pieces. Would love to make a video but my soap dispensers are all already edited hahaha just try it, it's super easy.

[@peterjohnsoncastro0407]

@@paulepaul1910 ok. I will give it a try.... 👍

[@melissayeo8280]

salamat po

[@Vignesh1087]

Can we use just simple hand sanitizer in it ? Output won't be foam right? So thati can use as sanitizer dispenser ...

[@jonscot8393]

Make own liquid 1/4 body wash to 3/4 water.

[@Ashish-hq9bv]

can we make hole on top back side of container and fill only from there?

[@josehalili8541]

For the rarfle!

[@Quickloaded]

I think the word you were looking for was funnel :)

[@nitesh7397]

what battery to use? Normal ones last 3-4 weeks only.

[@omkhond4406]

Bro can we use syringe to refill

[@royybaynavalta6054]

Sir Richmond pwde poba Kayo magreview ng K30 5G Speed Edition hindi kopo kase alam if ano bibilhin ko between speed Edition vs 10X 5g

[@shaikabdulkareem6678]

Cool. Can we use normal santizer liquid? thanks

[@XiaomiReview]

i dont think so. its a foaming machine inside

[@shaikabdulkareem6678]

@@XiaomiReview thanks for reply

[@salsacubayork2978]

I have the folllowing problem. The cap is stuck in the upper part. You have an idea how to get it out from there?

[@matthewyuen2814]

Thanks for teaching how to open the bottle. Now, next video would be the formula of the liquid soap.

[@arvinmarkpalencia4368]

Shout out po 🐱

[@ronch550]

Teka hindi ba ikaw si Richmond sa Unbox Diaries??

[@VrGugani]

I was wondering if it's gonna work if I make a hole next to the cap and pour the soap through it

[@immiteshk]

Good idea and i think there should be any problem.

[@hanochperi9445]

Where Can I purchase such cap to replace the broken cap?

[@immiteshk]

Cap not available, you will need to buy the whole refill bottle again. You can keep refilling the old bottle by removing cap till it works. Once the cap gets completely broken then you can buy new bottle.

[@youngog9037]

Chat me for the sanitizers u put in it and the automatic dispensers instead of changing batteries

[@odysseas174]

....Two months later....

[@mokuho]

How much water needs?😢

[@giselleng5425]

Can i use alcohol instead?

[@BIGHELLONE]

what kind of soap did you use to fill the tank?

[@Orlanzepol123]

It looks like Safeguard.

[@0546310344]

hello can ihave user manual

[@MrJatinder44]

Used too much brain ... kidding :P

[@VasifHuseynov577]

Opend is very very bed

[@AdiGoldsteinComposer]

There isnt really a way to pull this up without destroy this plastic cup :(

[@avada0]

Wow, what a despicable rip-off of a product.