How to refill STIHL FS55, FS85, FS90, FS110 and FS130 Super Cut 20-2

[@WalkOverHotCoal]

This is the best instructional video for re-spooling a Stihl Supercut 20-2. Unlike most bump-feed heads, this one doesn't work the same way I am familiar with. I was mystified by the two spring wires as well as how the auto-feed works. This video actually explained what the two wires are for as well as how the auto-feed works. This is most appreciated. Thank you very much for your efforts.

[@davidthomson6954]

Most helpful I hadn't used it for almost 12 months and forgot how to load the spool. Now back to the garden

[@trevorwalliss6681]

😊 one of the best instructions I've seen.

[@universalhybrids]

Thank you Single mum here, most useful 💛 I wasn't rapping the cord around the chrome brackets. 👍 See ya I'm off to do some brush cutting. Cheers

[@stevewilliams5761]

You made that look easy, I'm back to the shed to re-spool the correct way, appreciate your video

[@dontrufit7889]

I love these instructional videos that show you how to do things correctly when you acquire a machine that you have never seen before and need tutoring.This was gold to me, I was able to correct my mistake by watching this video (mmmm I wonder why this spool does not automatic feed like it supposed to) Thankyou! Sir very very valuable to me, Keep them coming

[@neilschultz355]

Finally, a video showing the head we find on our Stihl weed eaters in Australia. Thanks.

[@davewatson7070]

Excellent straight to point video demonstration - well done mate! You obviously know what you are doing and thanks for sharing; potentially saved me a lot of swearing and cursing.

[@stevesmith6528]

Dave Watson lol bit late for me with swearing and cursing lol 😂

[@lynnuttall]

Best instructions for this that I've seen. Well done.

[@coma3550]

So simple, but i have never come across this design and had me stumped. I love you and KZbin, thank you so much.

[@adriank9234]

brilliant saved me a bloody trip to local stihl dealer as this is my daughter's whipper snipper, I've only used Tanaka/Honda's before.

[@shaynemitchell5180]

Awesome, nice, clear and easy to understand instructions. Well done

[@sustainableliving880]

Thanks for that. Saved a lot of over phone instruction!

[@loveniacannon3302]

It costs a little more to have a pre-spooled line, but when you're in the middle of a trimming job kzbin.infoUgkx429xwEjNPnwzQohFrURRyKF51YfOD_Du , it is so nice to just pop out the old one and pop in a new one. Love Black & Decker tools. Especially the 20-volt battery operated ones. And, as usual, it came on time. Thanks Amazon!

[@graemesweetman8182]

Very easy to follow. Thank you a big help.

[@bonkerjohn1543]

Here's me today smashing my FS70 trimmer against the ground because the line won't come out haha. Thanks for the explanation.

[@johnrichardson5804]

Great video, very well explained, followed instructions and was working perfectly

[@the2kerrys]

Thanks for this instructional video. Really handy for those of us who put their maintenance manual in a "SAFE" place. Your initiative is much appreciated. Hope this brings you more business somehow.

[@nipapirini9402]

Solid!!! Bro ❤peace blessings For all hallelujah

[@Simpsoner2006]

Great Instruction! Greetings from Germany.

[@OmnivoreNZ1]

Not just how to do it, but *why*. Excellent - just what I needed. Thanks.

[@ejaaye7410]

thank you so much for that awesome video 👍🖐️

[@louisesochacki2260]

Great video, made it really straightforward, thanks!

[@furball7134]

Cheers Chris ... nice video mate

[@brianatkinson8975]

Thank you you just assisted me greatly. Well done

[@pilgrim5355]

Thanks man this was really helpful and easy to understand.

[@johnpeach610]

Thank you saved the day

[@derekanderson4940]

thank you for that video nice one👍

[@kiwitoffee]

That's just what I need to know - thank you.

[@rosselgarand1318]

very useful video thanks buddy ☺️

[@bosanac3734]

Amazing video mate. How does it work while cutting? Can you bring out more line while cutting ?

[@mustang67dk]

👍 great and super explanation

[@michelledodunski2667]

Awesome thanks. Wondering where I was going wrong!!

[@ilyk49]

Exactly what I was looking for. Great video. Thanks a lot for posting this.

[@Juani2392]

It works on the fs55?? And 2.5mm nylon is right for this machine?

[@leszekebertowski]

hi there.... great video...(great work :)Could You tell me please what is the best head to go for stihl fs55? supercut 20-2 or there is a newer model for it ?kind regards

[@efrenvenegas3346]

Do you know whats the regular trimmer head for fs100rx

[@goldentrowel1968]

Hi I just bought a Stihl FS 55 I wont be using a blade should I take the extra bar sticking out the side off the handle do think Or leave it on

[@FastEasyEngineRepair]

thanks very much the2kerrys! We're really glad we can help

[@kalebfletcher715]

Ive got a stihl fs 85R and my head is nothing like this

[@michaelmena9626]

good Instructions

[@bushwickbillOG]

where can i find this head? im sick of the bump feed

[@surfcaster654]

To awesum 👍....

[@anthonycampbell1846]

I have one of these and rewound it as per your video, the problem is that on start up or idle the. Rev it throws out about 1/2 a meter of cord. Didn't do it with factory one. In using the stihl 2.4mm cord too. Any suggestions? Thanks

[@brentonkelly3780]

good video, very helpful, except audio could improve in spots. The instruction manual is very poor in terms of covering this topic adequately. Thanks, much appreciated

[@rudessu]

At the 2:42 part of your video u say the spool moves to let more line out but you turn it clockwise which shortens the line. You can't move it anti clockwise to lengthen the line. Thinkin it is supposed to drop down slightly to release itself and feed some line out. No matter what i do mine will not work the way Stihl says it should. It will not self feed. Will take it back to the Stihl dealer tomorrow.

[@streamlight2]

What size threads does the super cut 20-2 have?

[@evanking6737]

great video - all the detail one wants. I do have one problem. when I pull the cord to start the machine - the line retracts about 25 mm back into the head, after 4 pulls the line has vanished and I have to stop and open it up to pull it back out. I am tensioning it and placing the line on the outside of the guides as per your video. I replaced the head with a new one thinking it was worn but the new head does the same thing. This never used to happen. any ideas anyone?

[@Juani2392]

u had to fix the realenti carburation, the cardan shudnt move on ralenti.

[@silviosilva8859]

Valeu colega, você ajudou muito!

[@beayoungs]

Why is it so hard to find a string replacement for a FS110?

[@ryanwells5035]

This is not how a FS55R head is

[@burtvhulberthyhbn7583]

I put the echo head on my Stihl. It's what most people do.

[@danutakozie5946]

Czy można to przetłumaczyć na język polski dziekuje

[@idek9041]

Cheers

[@shivamaraj7055]

Any video on fs 500

[@FastEasyEngineRepair]

Is this head brand new? If not then check the wear on the eyelets and the bows. Make sure you're wrapping the cord around the outside of the bows and not inside or through. I just had a new tab on our website made to make things a bit more understandable in terms of part names that will show you the bows/eyes/everything in the head. I hope this helps! just check the description above.

[@santiagoguzman5567]

hooola tengo una f5 55 noo sele puede sacar el protetor por que ria

[@FastEasyEngineRepair]

it has .095" inch - 2.4mm nylon cord.

[@latt46]

Was going to buy this whipper snipper but after seeing this much prefer the Honda speed feed head. This is too fiddly

[@budbrewsky6658]

It's so complicated. WHy hasn't anyone invented an easy way to respool these stupid tools? I;ve bought 3 differnt models over the years and just throw them over the fence in frustation.

[@karlvorderwinkler4130]

Useless. Doesn't work

[@TRUENEPHILIM1]

THANK YOU