How to Reglue or Repair Your Backcountry Skiing Skins

Рет қаралды 19,131

Күн бұрын

Sarah Carpenter, co-owner of the AAI and lead instructor, spends a good deal of her time on her backcountry skins. So when one begins to flap around on a tour and no longer sticks, it's ready to be repaired or reglued.
This video walks you through, step-by-step, how to do both.

Пікірлер: 17

@timhoenig 7 ай бұрын

this helped me rejuvenate some old skins that had been sitting for years; now ready for some backcountry touring; thank you, Sarah.

@220ski220 6 ай бұрын

Hair dryer and plastic scraper to get most of the glue off. Then use the brown paper bag & iron method for the residual glue.

@sargeorm 3 жыл бұрын

also can use a heat gun and a steel scraper to remove glue

@macdukart645 4 жыл бұрын

Excellent tutorial! Sarah's technique is great. (you can also use a heat gun and metal scraper to get old glue off). It's not that hard and well worth keeping perfectly good skins alive rather than abandoning and buying new.

@dougwhiting7631 3 жыл бұрын

or after first pass with iron and paper bag use a metal scraper to get more glue off then go back to iron and paper. Takes off a lot of glue and saves two iron paper steps.

@blues-indianer8667 3 жыл бұрын

@CHIP (see below) @Sarah: Hi Chip+Sarah, I'm Henry from Germany. For taking off the old glue I took an old duvet cover, which had an absorbent surface. I went several times by middle heat with my iron over it, and it took about 80% of the old glue. I repeated that, until it was gone. Some glue knobs I removed with a scraper and let all cool down. Then I did like Sarah showed. Now THE MOST IMPORTANT THING: What to do with the skin WHEN NOT IN USE?? I read this and practiced it and went very well: I cut the arms of a really old goretex/raincover jacket (hard shell surface). When putting off the skin from the ski, I pull the skin through the cutten arm (lenght appr. 25 inches). Then I wrap the skin on the outer side of this arm (one side) and wrap it a second time on the free side. So this is well for a skin about 70 in. This material doesn.t leave any fibres on the glue, and in this manner I save the skin in a plastic bag over the rest of the year. This works great! Kind regards, Henry

@donjezza 7 ай бұрын

great advice thankyou

@meredithmcconvill296 4 жыл бұрын

Thanks for sharing...I need to get on this before summer!

@andrewjohntomko 2 жыл бұрын

Great vid. I prefer a heat gun and scraper as I’ve found the paper bag route to be not that great at removing the goop first pass. If you choose to go heat gun/scraper route then scrape evenly and don’t press hard. Either way works to keep your skins healthy so see what works best for you. Good job on stressing ventilation - glue is super toxic so the sheets are definitely the least nasty.

@chipscialfa9119 3 жыл бұрын

Ummm..I tried this, just as you said, with old grocery bags instead of parchment paper. Problem! The paper is now hard fast to the glue...on the skin. Any ideas on how I can take this off?

@chipscialfa9119 3 жыл бұрын

To follow up on this, I've been told to never use paper bags for riviving or removing glue. The composition is such that they will disintegrate and/or bond to the glue and can't be easily removed. Getting off this mess is near impossible without removing the glue completely, which I've now done, using parchment paper. FYI, I made sure to buy 100% natural parchment paper, made of vegetable material. Some parchment paper has silicone and I don't know how it would work or react chemically with the glue. Second FYI: Sarah said once a scraper is used to remove glue, it can't be used for anything else. I used a putty knife to remove the glue and then cleaned it with Goo Gone. It's like new!

@allanlucier4651 3 жыл бұрын

I have always found using a wide (rather staff) metal scraper with a heat gun (usually on a the lower setting) is an effective and quick way to remove the wax before rewaxing skins.

@blues-indianer8667 3 жыл бұрын

Sarah, thanx for this vid, well done!! KR Henry