How to Remote Access Your Router or Network TP Link

[@SashankK-b4r]

Thanks for the detail explanation

[@foridulislam2679]

Thank you sir for the great content!

[@shabanimussa4359]

Hello sir, can ask questions I can set my home router to access the internet anywhere?

[@homeautomationmadeeasy3276]

Yes ofcourse you can

[@master_braure]

@@homeautomationmadeeasy3276 how do you do that

[@vgopalt4922]

Good Video between two networks👋 But ISP will provide their own branded routers. In My case: Jio Fiber ISP router and D-Link (DIR-816 Dual Band) connected fine but when power fails (no UPS) @ My Jio Fiber router side, it's restart, all my configuration gone. Again I need to reconfigure all the time when power fails. Where as power fails at D-Link side nothing will happen. Any solution for this Please help any time faced this problem🤝

[@SupremeSkeptic]

How to open a closed port? I tried port triggering and port fowarding but still failed

[@ferasawwad71]

Hello, do you have a video on how to configure the json API feature in the TP-LINK Archer MR200 router. The target host is an Android mobile phone only

[@jameelbaraja4098]

Could you please show the process of remote access to TP link model TD-W8961N

[@jamojames254]

Kindly can you do a video of accessing Huawei router remotely

[@homeautomationmadeeasy3276]

Okay

[@jamojames254]

@homeautomationmadeeasy3276 💯

[@roufe037]

Can you please make a video for the TP-Link VX220-G2V

[@chubritsa9255]

Hi, thank you for the great content! I just wanted to setup one other thing as well. Do you know how I could access a locally connected device to this router from another network (remotely)?

[@homeautomationmadeeasy3276]

Yes

[@chubritsa9255]

@@homeautomationmadeeasy3276 Could you please help with that? The port of the device is closed for other IPs than the local one.

[@gsandova11]

Please, I have the same question. The reason I'm trying to connect to this router remotely is to access the DVR for the security camera system.

[@berttammer4900]

Thank you for this video. But i want to access a thermostat in my network from a Remote location. How about that

[@homeautomationmadeeasy3276]

You can use tunneling. For that you won't even need router configuration.

[@BeltsandBuckles01]

My hhd that is connected to my routers usb port is not found if i make a new file with my phone on that hdd and if i scan in the router again for the hdd it is fine again why is that anyone?? So it looses connection if i make a new file on it

[@jigneshchauhan5866]

hello sir, i have ER7206 TP ROUTER, WHERE SECURITY OPTION NOT AVAILABLE FOR REMOTE CONFIGURE ROUTER. PLEASE GUIDE HOW CONFIGUR ER7206 ROUTER . PLEASE MAKE VIDEO ON IT

[@SoLuckyHD38]

Thank you 🐐

[@lifeatstartup]

no ip login is filled, but it is not being connected,

[@ragibnafiz8548]

helpful. undertstood the process

[@gairesuman5750]

How to do in powertech router

[@harshitraj693]

Help me , i have static Ip but i cant login throgh webpage from another network

[@homeautomationmadeeasy3276]

Are you getting any error message when you are following the steps?

[@harshitraj693]

@@homeautomationmadeeasy3276 in remote option 255.255.255.0 option not there .... And i Set all settings like 8080 and give all so that i access webpage from my internet but when i login then a popup comes cant connect to this webpage

[@jonathanm.c.8842]

Thanks but man.... It was sooooo slow.

[@akhbaralyawmi9402]

it works but when i restart my router i cant login any more , i need every time to go to no ip website and post the new ip adress and this is so hard and wastin time , do u have any idea

[@homeautomationmadeeasy3276]

How old is your router?

[@akhbaralyawmi9402]

@@homeautomationmadeeasy3276 tplink 2016 the problem is in the ip update , u need to update it manually in the website

[@homeautomationmadeeasy3276]

@@akhbaralyawmi9402 are you using noip or some other?

[@akhbaralyawmi9402]

@@homeautomationmadeeasy3276 I use no-ip

[@homeautomationmadeeasy3276]

@@akhbaralyawmi9402 check the noip credentials you have entered in router is correct. Also there is noip terminal based client. Try that if nothing works

[@swordali]

thanks

[@homeautomationmadeeasy3276]

welcome

[@pitz10]

it doesnt work with my two different tplink router. Even I follow all the instruction.

[@homeautomationmadeeasy3276]

Which model you have?

[@pitz10]

​@@homeautomationmadeeasy3276 I thought you would not reply thats why i didnt give the details of my router. but pls help.. heres my 2 router: Model No. TL-WR840N, Model No. TL-WR840Nv1

[@pitz10]

sir under my dynamic dns configuration it says Succeeded! after I login. and i already did what ever instruction in the video but when i try my customize ip the page says "This site can’t be reached"

[@harshitraj693]

@@pitz10 same here bro

[@harshitraj693]

@@pitz10 if you Know how to setup plz helpme

[@catchawakeup6411]

What is that annoying sound in the background. Stopped watching because that noise was making me crazy

[@homeautomationmadeeasy3276]

It's background noise, really sorry for that

[@danialtariq3977]

Lakh di lanat

[@anupdas3528]

Too much bokbok

[@samratacharjee3457]

too many pauses and saying "ahh".

[@homeautomationmadeeasy3276]

I am sure you can make better videos and that's why you have 13 sub.