How to Remove a 2007-2011 Toyota Camry Hood, Part 1

[@ReveMoto]

Thank you for watching our video. 2007-2010 Toyota Camry Hood, Where to Buy: bit.ly/revemoto_camryhood If you need any other high quality painted auto parts or want to chat with us, Visit us at : www.revemoto.com

[@nicksdragon6929]

That was an incredibly well-done video. The camera work was really well thought out as well as the process. Thank you.

[@ReveMoto]

Thank you so much Kyle!

[@davidgibbs3294]

How much do you think frame work would cost like a push in by the headlights?

[@ReveMoto]

Hello. Sorry for the delay. Frame work varies depending on the damage, labor what may have to be replaced. Frame work can easily start at $200-300 and up at any collision shop. Good Luck.

[@static_Tricolor_camry]

I wanna get a Carbon Fiber hood for my Camry, but it's almost 2 Grand. Also the Carbon Fiber trunk as well. I wish it wasn't a moving violation, driving without a Hood.

[@ReveMoto]

Yeah that would be pretty cool too. Unfortunately it does help with preventing issues with water going into the hood. If you need a hood go to www.ReveMoto.com

[@speedyrunner101]

Can I replace my 2011 hood with a hood from another year or model?

[@ReveMoto]

The newer 15-17 models don't look to be compatible with the older bumper or or fenders. We would recommend looking into the Toyota forums but it may not seem likely without changing other parts.

[@DanielMartinez-tf3vp]

So 07-11 are hoods are compatible with each other?

[@ReveMoto]

Yes sir, the model range is from 2007 to 2011.

[@frankpotter8465]

How do you lower the back section of the hood, it sticks up in the rear.

[@ReveMoto]

That’s probably the hinges needing adjustment

[@melforbes592]

@@ReveMoto Toyota Camry "frozen hinge syndrome. Get new hinges. There is no "adjustment"

[@bayshark7o7]

Hood on passenger side is crooked after oil change. Noticeable gap. Any idea what happened?

[@ReveMoto]

Oof. Hello and that is quite odd. No idea why it would be crooked. An oil change does not require the hood to be removed for any reason. You just have to open it to pour the new oil in. The only think I can think of, is maybe the bolts were loose and it just shifted over time. You can easily fix it by loosening the bolts and adjusting the hood. You slightly move the hood forward or back until you get the desired spacing. Good luck and thanks for watching!

[@inarigains11]

You could just replace the second person with a towel and a broom stick🤷‍♂️

[@ReveMoto]

Lol, yes. I have suggested this with a 2x4 and some towels for the corner but we play it safe with a customer vehicle. We don't want to ruin anything, especially on camera. Thank you for watching!

[@hollyhyeh9854]

Its not a 10mm socket, it’s a 12mm!

[@ReveMoto]

Thanks Holly! He probably just got a little confused. Take care!