How to remove and clean Samsung Transfer Belt CLP-365

[@petraotto9681]

Top, hab nach einem anderen Video nur das mit der Alufolie gemacht, was nichts gebracht hat. Aber der Hinweis mit den Zählerständen zurücksetzen war GOLD WERT!!!!!! DANKE

[@FARABALE66]

this video is the only one giving precisely the steps. Thanks a lot

[@thalakullick9272]

Finally I did make it. Thank you so much! I just used a qtip (cotton) in order to entirely clean the residue container.

[@acp1542]

Thanks so much for this. I was on the point of throwing out this printer for

[@alekseylattu1650]

Very useful video. Solves many problems.

[@gpmoja]

Great tutorial

[@franciscofortunato1864]

Muchas gracias por mostrar tu meticuloso trabajo!!

[@mateoblum]

This is the best tutorial ever! Samsung should pay you for this

[@jorgeiturri]

Excelente video... muy ilustrativo. Muchas gracias

[@philippebich1635]

Bravo ça marche. J'ai pu tout nettoyer 👍👌

[@gerthuber2204]

Very useful video, my printer prints clean once more. Thx!

[@silsila5040]

Hi, this video has been most helpful. Upon cleaning the transfer belt, it has started to make very loud screeching noises when calibrating and printing. What can I do to solve this issue?

[@viandant5]

I the unit has been correctly assembled, I think you have to lubrificate the cleaning blade of the belt, or wait until the loud disappear

[@Sarwiz1]

Very good video

[@tuamigo64]

Gracias por compartir.

[@NOUREDDINESOUIKI]

THANK VERY MUCH

[@JudithLang1]

I’m having problems with paper jams using glossy vinyl paper. Will this help if I clean that part?

[@viandant5]

No, probably the problem are the feed rollers, or the fusers

[@jessicaabigailscott]

Hi, thanks for your informative video. I bought a new transfer belt and fitted it as per your instructions which went well. But, when I turned the printer back on the error message "prepare new transfer belt" still came on. Any suggestions? Thanks.

[@MrSuicycle]

After replacing the unit, you still need to reset the counter of the printer, which is done in the Tech Setup. To enter it, the combination of keys varies depending on the printer model - and unfortunately, Samsung didn't make them public (but they can be found for some models around the internet and on YT).

[@thomasspielhofer3229]

@@MrSuicycle It's usually 1934 for most models

[@vasilisntafos_Billy-Bo]

excellent...thanks man!!!!

[@pattanantasb.1061]

Very well thank you.

[@renanramirez6805]

Thank you!!!

[@IanMcPherson_ab]

I performed the cleaning process, but the printer won't print colour anymore - just black and white - any suggestions?

[@viandant5]

a cleaning process in a CLP-365? I think it's a problem of settings

[@IanMcPherson_ab]

I figured it out - I missed replacing the screw that holds the black flat plastic part at the end near the wires. After installing the screw (which I now call the colour screw) the printer works perfectly - no more ghost images and bright colours. Thanks again for the video it was excellent!

[@abdulhakeem_tweel]

The right plastic lever shown you opening from the minute 1:18 was suddenly fell down of my printer, I tried to return it back but couldn't know how, any help?

[@viandant5]

probably it's broken, try to reassemble the printer without that lever

[@Suselinchen1]

can i do this for samsung clp300 too?

[@viandant5]

No it's different

[@armandas101]

How do I find out what error my printer has ? Because it is flashing red and not printing I don't know why

[@sergio67p]

Buongiorno, è dovuto alla cinghia una linea verticale sulla stampa? composta da un assieme di vari colori e non completa da cima a fondo. Come posso intervenire. grazie

[@viandant5]

E' più probabile che sia il tamburo. Comunque controlla se la riga è presente anche sulla superficie di tamburo o sulla cinghia. In questo caso potrebbe essere la lama di pulizia

[@sergio67p]

@@viandant5 grazie mille, buongiorno

[@patas100]

mi impresora samsung c460w no imprime a color y si tiene toner, se le cambio la cinta de transferencia porque manchaba mucho, ahora imprime pero no quiere a color, que puedo hacer?

[@viandant5]

es decir, ¿imprime en negro lo que debería imprimirse en color?

[@bertaeats937]

I have an error door open when all the doors of the printer is closed. it also says PAPER PROBLEM

[@viandant5]

If all the doors are open it's normal to have a printer error

[@LearnerBoy]

Hello, I have refilled on CLP365 only black powder on all cartridge by local toner for black printing ,now printer is working but sounding very bad , how can remove it , please suggest me how to remove the sound .

[@viandant5]

the bad sound may be related to the gears, the internal meshing bar or the toner powder. It's difficult to remove a bad noise, try lubricate all gears. If the cartridge is working I suggest you let it work

[@LearnerBoy]

viandant5 thanks for your reply.

[@stunetwork101]

What is the problem when the pick up roller won't engage? It won't turn.

[@viandant5]

II think it's not an electonic problem to the main board, you should have an error message. It could be a mechanical problem, a gear or something not in the right position

[@iNord.]

Mhm i had a loooooot of waste toner in my drum unit, is this normal?? tried to purr it out but only got the unit very dirty :(

[@viandant5]

Yes, if the toner does not completely fill the waste toner deposit. Near the end of the drum life the deposit may have lot of toner powder

[@iNord.]

@@viandant5 wow, thx for your fast answer on a 6 year old video, amazing! 🤩 Things started to get messy when my waste toner deposit was full and i've emptied it... the printer still complained about a full waste container so i put out all the parts as per your (very good) video - i think i got quite a lot waste toner out of the drum unit in the end, thankfully its still working without major print artefacts/issues - guess the drum is simply near the end of its life then (got the printer used already)

[@viandant5]

@@iNord. I always try to answer all questions! Waste toner depends on enviroment too. In winter and with high humidity there is more waste toner. If the quality is still goos, no problems

[@tanner1985]

Salve Gianni, dopo aver seguito questa guida, ho rimesso tutto a posto ma la stampante adesso stampa solo ed esclusivamente in nero, i colori li salta, cosa potrei aver combinato? Strano perchè ho davvero fatto tutto abbastanza precisamente... Se hai qualche idea potresti rispondermi? Grazie

[@viandant5]

Stampa solo le parti in nero e i colori non li stampa? Non mi sembra un problema di cinghia di trasferimento, a meno che sia stata rimontata non correttamente e ora non sia parallela alle cartucce

[@tanner1985]

@@viandant5 sebbene stampava male, comunque stampava sia nero che colori. Ho trovato questa guida, per la quale ti ringrazio, visto che lavoro come tecnico informatico ogni tanto metto mano anche a stampanti, prima volta che manovro una transfer belt, pulisco tutto sistemo tutto, rimetto su, provo e cosa succede? Stampa solo le parti in nero e salta completamente i colori! Da computer mi indica anche i livelli del toner presente ed è tutto nella norma… hai in mente cosa potrei aver danneggiato? Non è neppure mia, sono avvilito 😞

[@viandant5]

Purtroppo non mi è mai capitato, mi viene solo in mente che a lato della cinghia ci sono dei contatti, uno per ogni colore. Forse in qualche modo quei contatti sono difettosi o collegati male tranne il nero

[@tanner1985]

@@viandant5 Per conoscenza sono tornato a riportarti che, ordinando una cinghia di trasferimento nuova, i colori sono tornati, quindi ho in qualche modo manomesso la cinghia precedente! (Però ho tirato un sospiro di sollievo, non ho danneggiato la stampante in sè)

[@fedorov7184]

my samsung clp315, the colours are total off. It can't print the colours that show on monitor. do you know why?

[@viandant5]

If you have no error messages, probably the problem in is the printer settings. look at the printer folder, may be you selected grey scale

[@anne-lisenerfin5540]

Bonjour ! J'ai changé la courroie de transfert de mon imprimante Samsung XPress C48W series, puis je suis allée sur tech menu et fait tout ce qui est indiqué. Mais quand j'ai voulu imprimer, un message est venu sur mon ordinateur : défaillance du capteur #C5-1710. Qu'est-ce que c'est ? qu'est-ce que je peux faire ? Merci !

[@viandant5]

Try to remove and replace the Transfer belt, turn the machine on and off

[@anne-lisenerfin5540]

@@viandant5 je vais essayer. Merci !

[@liefka22]

I replaced the transfer belt, but the red light keeps coming up and the message is still saying prepare new transfer belt. what do I do?

[@viandant5]

Try to reinstall the printer driver. was the trasfer belt new and original? there is a fuse, you can't install an used or remanufactured unit

[@annisalin4367]

I did it

[@amalsundeed7266]

i am having paper jams on my printer, how can i fix it?

[@viandant5]

in this channel you'll find a video on paper jams

[@Marco.Hofmann]

while trying to remove the transfer belt I pulled the cable out of the plug. Now it's damaged and cannot be fixed. I don't even know where the cables go. Such a flimsy piece. Is it possible to purchase just the cable because buying a new transfer belt is not worth for me.

[@viandant5]

The connector at 00:46? I think it's difficult to find the cable.

[@Marco.Hofmann]

@@viandant5 yes exactly that one

[@viandant5]

@@Marco.Hofmann It's difficult to say without seeing it but for sure there is not a spare part, unless you remove it from an used transfer belt of the same type.

[@Marco.Hofmann]

@@viandant5 yes that's my idea too. I'm trying to get another printer and hope I can just switch the transfer belt unit or the cable with the small circuit board. My mistake was that I tried to disconnect the cable with small pliers and unfortunately ripped all the cables out.

[@ahairstonification]

Thank you so very much. You saved me time and money. People like you are the reason good moral values are still in place

[@eriktennant737]

Exact same setup as my C430W. Thank you for taking the time to make and share this.

[@pnp6408]

Just saved me from buying a new printer. Thank you!

[@clearcreek69]

I was having difficulty removing the transfer belt & decided to go online for help. Thanks for this video

[@clearcreek69]

I thought I fixed my problem yesterday but I printed something this morning & my printing is still smudging. I'm going to try cleaning the drum today

[@Elnasir]

Your video helped me detect why my transfer belt wasn't printing properly. Thank you.

[@viandant5]

happy to help you!

[@steinolavsletten2537]

Lots of fellow print-users praise Your video, today I join the congritation of happy print-users with a fixed and working transfer belt !!

[@fredaustria2133]

That was the solution for my big problem about the yellow lines on the C460W- Great....Thank yu

[@CreArtationUk]

Geat video and explanation thanks. I had a transfer belt fault on a CLX-3305. Completly taking apart as per your second half of video and cleaning has solved the problem👍 the only different thing I did was fitting the side springs before the outer cover was reftted. Acess to them was then easier.

[@WilfriedMehlhopLange]

😎 SUUUUUPER- Thanks so much

[@amitlec]

why I feels like I am cleaning my AK 56 !

[@ineterceptor]

I have different model, but the basic principle is the same. Thanx for saving me buying new printer! Merry Christmas!

[@JuanCeSS]

Muchas gracias me ayudo mucho tu video.

[@JasonBlue-qn6zm]

Thank you very much! I don't use my printer often, but for the last few years, it's been printing dirty. I followed your steps here, and it's printing like new!

[@Thomasisport]

Super erklärt. Und bei meinem Drucker hats funktioniert. Danke

[@ezrayates2175]

Excellent informative clear instructions. My printer had been fine until I needed to replace the black toner with a new one and the next print was awful quality with faded strips. Followed your instructions and felt very comfortable with my execution of the process but unfortunately made no difference to the faded bits. Could it be my new black toner cartridge?

[@viandant5]

Probably the cartridge is defective. The low quality is on all colors?

[@timdemeyer6844]

Thanks a lot! Very detailed video and nice breakdown of steps!

[@Qlii256]

CLP-315 with transfer belt not being wiped. I did clean it and disasembled just like in the video. The wiper has two rubber parts that do the wiping. The bigger one came loose when I tried cleaning it properly however. I cannot find a replacement part. Do I need a whole unit or will just the wiper fix my issues? It seems like the wiper does not take off all the powder left on the belt for some reason.

[@viandant5]

I think it's difficult to find the wiper blade. May be on aliexpress

[@martinmuller2206]

I made all this and code (and red light) C5-1110 Still on printer. What can I do??😢

[@viandant5]

It's a general error, could be the toners too

[@ken353523]

hello, good afternoon, my printer marks the entire sheet with a very dark background, they told me that the problem could be the tape, if the tape is cleaned with alcohol and the blade, I will solve the problem or I have to buy the complete new tape, thanks .

[@viandant5]

Which tape? the belt? Yes you can try to clean it with isopropyl alcohol

[@emilylaney]

A+ video! For anyone with trouble removing the wire clip: I had to use pliers to firmly pull out the wire connector. It was too tight to remove with fingers. No damages.

[@zeckuss]

Thank you so much. Your video helped save our problem

[@marinesculucian6538]

Interesting and useful! How can you know how much toner is left in each cartridge? thanks

[@viandant5]

The toner level? You can print the printer status kzbin.info/www/bejne/iKK8ao1tl699mac

[@freda2758]

Thanks, guy! You saved me a lot of tears.

[@francoish9641]

MERCI pour cette superbe vidéo !

[@deDANIEL11609]

It improved quality a bit. But still there are two horizontal stripes that go across half the page, sometimes black, sometimes multicolored, which also interrupt the printing, and I don't know what it could be. Can anyone help?"

[@viandant5]

It could be a contact of the charge roller, either drum or transfer belt

[@deDANIEL11609]

i cleaned the transfer belt already, but does not seems like that this was it. What do you mean by charge roller? Does it make any sense to try cleaning the drum? @@viandant5

[@hirmizzz]

Thanks a lot dear Viandant ! Very clear & detailed video

[@aardvarkmcgillicuddy]

The transfer belt won't come out. It's stuck. Any advice?

[@viandant5]

No, sometime it mightbe a little hard to move but it should be removed in this way

[@tehsalt]

Thanks for the informative video, fellow human.

[@Mcfa]

your instruction helped me a lot. Thank you.

[@nickfontannaz4176]

Thanks for the clip, very helpful, I replaced the transfer belt with a new one (Samsung) however the Status light continued to flash any ideas? Thanks again

[@viandant5]

I've no idea, the transfer belt counter shuld be resetted.

[@jimsteinhauer5510]

This procedure will require going into the Tech menu to reset the counter for Transfer Belt (there are other KZbin videos on how to do this depending on the model, but it essentially a specific sequence of key presses on the controls: the display will read Tech menu if you are successful. For the printer in this video without keypad, the sequence is Menu, Back, Left, Right, OK, Stop/Clear, Menu. The C460 with a keypad uses Menu, #, 1,9,3,4, Menu. Once in Tech Menu, then go to Data Setup, then Clear Count (for the specific part you have replaced)). The mainboard doesn't "know" that the Transfer Belt (or any other consumable part) has been changed: resetting the counter is the only way to tell it you have completed the procedure. If you get error messages on any of these other "Consumables" and/or the Status light continues red/message appears you need to reset any of these parts, the Tech Menu is the only way to do this after you change out the part. Important: only change out parts once you have pulled the plug. Hot-swapping parts with the unit powered on may create problems with locking in error messages and may damage the mainboard processor.

[@jamgonzaga6754]

solved my problem !! Thanks to you, my printer's working again. Awesome, keep it up!

[@sjakob52]

Hi great video. I have the same printer. I bought black toner but it is not original - they promissed it would be just as good as the original. Now I am not sure why the black color is weak when I print. Would it help to maintain the printer (maybe I did something wrong when I mounted the black cartridge) or is the problem that the toner is not original. It would be nice to know before I start maintainance. Thank you in advace. Hope the spelling is ok.

[@viandant5]

I think there is nothing wrong mounting the cartridge. Probably the toner cartridge is defective but the problem could be the drum unit too. The compatible cartridge are often good quality

[@sicadiaz96]

Y scar todo lo de atras q tiene tornillos y cables master. Lo hiciste y ni lo filmaste

[@kings_pride]

thanks, had to clean the transferbelt because there was some dirt on it causing white dots on black images :)

[@MrCarissim]

THANKS FOR HELP ! :-)

[@AlinaDominikSanow]

Good Boy, i love you for this Video 😙

[@vovanfun]

Thank you for the video! It was interesting, this model has not yet analyzed the transfer belt! Best reguards from Kiev

[@viandant5]

+vovanfun thank you, have a nice day

[@YelitzaDeColina-kp6zc]

no hablo ingles pero estoy totalmente agradecida por su ayuda

[@viandant5]

There are spanish subtitles

[@waldemaraquino]

Who tô fix fanton print, Samsung clp 363w

[@viandant5]

you mean a repeteated print or text on the sheet?

[@robertopattaro8875]

hi, i have do this deep cleaning but after doing that my printer print only in grayscale. I dont understand why? You have any idea?

[@viandant5]

What is a deep cleaning? Check the printer settings in the printer folder, may be it's set in "Grayscale"

[@raznal]

hello....... I have this error code with a red light: "Error Code: C5-1110 - Prepare new transfer belt unit"...... do you know how to reset this and keep printing??? maybe there is a similar method like the "drum unit reset"?? thanks for the help! :D

[@viandant5]

No, I don't know any reset method for the transfer unit

[@ChristianeHartmann-ij6mz]

Wir können den Stecker nicht lösen,er klemmt fest.Es ist der Stecker oben rechts mit den dünnen Kabeln.Was tun?

[@viandant5]

Try lift up the connector with a flat screwdriver

[@rabbitzki]

Hi, do you have a video showing how to change the Fuser in a samsung Xpress C480FW please?

[@viandant5]

it's similar to samsung clp 320/360, in this channel there is a video

[@DerThomes]

Great Tutorial, well done and thank you very much.

[@MK-hr5yv]

Great video, thanks👌

[@pierregautier9980]

Thks . it was very usefull for a 3170. it almost the same. now the printing are perfect.

[@angelruz9119]

thanks, i fix it

[@OmaLisbethsMaultaschen]

Great Video!! Thanks a lot - I just exchanged the transfer belt! My printer now is printing again :-) However - the note on the little display "prepare for ne transfer belt" is still there. How can I "delete" or stop this message ...

[@viandant5]

I don't know any reset method, it should delete itself with the new belt

[@TheProtheuz]

😍😍😍👏👏👏👏👏👏👏👏👏👏👏

[@omaroufkir7352]

thanks very mutch , شكرا جزيلا

[@sicadiaz96]

Te falto sacar todos los tornillos y la tapa en el video

[@SonjaSannert]

thank you so much!

[@sofiamiranda6477]

Hello, i have a clp 315 and i cant remove the drum unit, seems like its stuck?

[@viandant5]

Yes, it could happen i's hard to remove. Try to move it up using a lever or a screwdriver then pull it out

[@남극펭귄-n9k]

감사합니다 꾸벅~

[@rogerdzul4965]

No sabia que allan x el mundo tambien repara impresoras!!!

[@InspirationZoneandRelaxing]

Thanks for your help... It was very nice...

[@thalakullick9272]

I couldnt make it. Perhaps, it was very dirty. I did everything you mention on the video and no. :(

[@bernardschmitt1813]

Merci !

[@mimi-c8o2s]

Tausend Dank für dieses Video!!! Echt super gemacht 😍

[@DanBurgaud]

How often do you need to clean the transfer belt? once every 10,000 pages or so?

[@viandant5]

Not necessary to clean it often. MAy be 30-40.000 pages if there are no print quality problems

[@marcelolobfig]

I just replace the drum unit, a new cartridges toner, and the lights still blinking, all of them. I was wondering if you could get some solution to this problem. Thank you

[@viandant5]

There are no reset procedures. I think the problem are the chip. Are compatible cartridges? However Samsung make all they can to create problems to cartridges, even original ones

[@marcelolobfig]

@@viandant5 the cartridges are compatible but not original and the image drum unit chip was already replaced. Could it be the transfer belt? Many thanks

[@viandant5]

@@marcelolobfig Yes, it could be the transfer belt. Check the printer folder to have more informations

[@golfernst]

Excellent!

[@herbertwild9837]

Verstehe zwar kein englisch, muss ich bei diesem sehr gut erklärten Video auch nicht. Herzlichen Dank

[@viandant5]

There are the german subtitles