Рет қаралды 2,484
How To Remove And Replace a Front Hub bearing on a Without a Press machine.
Replacing a front hub bearing on a WagonR without a press machine can be challenging, but it is possible with the right tools and techniques. Here are the steps you can follow:
1.Jack up the car and remove the wheel from the side where the bearing needs to be replaced.
2.Remove the brake caliper and rotor from the hub assembly.
3.Remove the cotter pin and loosen the axle nut.
4.Remove the steering knuckle from the strut assembly and remove the axle from the hub assembly.
5.Remove the hub assembly from the steering knuckle.
6.Using a bearing removal tool, remove the old bearing from the hub assembly.
7.Using a bearing installation tool, install the new bearing onto the hub assembly.
8.Reassemble the hub assembly onto the steering knuckle.
9.Reinstall the axle into the hub assembly and reassemble the steering knuckle onto the strut assembly.
10.Tighten the axle nut and install a new cotter pin.
11.Reinstall the brake rotor and caliper onto the hub assembly.
12.Reinstall the wheel and lower the car to the ground.
Note 🫵
It's important to note that this process requires some mechanical expertise and specialized tools. If you're not confident in your abilities, it's best to have a professional mechanic perform the repair.
#mechanic #front #hub #bearing #wagnor #tools #mechanical #pressmachine #mechanicaltools #automobile #wheel #trending #viral #cartipstv
/ cartipstv
/ nisar.khan.98478
/ nisargkhan143