How to remove door panels 04-08 f-150 work truck edition. (Hand crank windows)

[@JDIZZY024]

Appreciate the greatly detailed video some A hole! forced my passenger window down I'll have to do the same thing 😭

[@DaKingUvFishin]

Happy to help

[@AndrewAlvarez-py1zz]

Thank you so much Johnny. Every other video I found was how to remove a door panel from an F-150 with power windows. This was super helpful. Thank you.

[@DaKingUvFishin]

You're welcome! Glad I could help. I wish I could have been even more detailed but I hope the video helped.

[@parkerware5346]

Thanks dude, great video

[@DaKingUvFishin]

Glad you liked it!

[@bucketmouthinc82]

As they say “When in doubt, pull out!”

[@ibpeepin331]

Thank you for making this video, I have no power windows or door locks and I could not figure out why it would not come off when I followed all the other content providers described. It was the winow roller that you described and then the panel came off, thank you again & take care.

[@DaKingUvFishin]

Your welcome! I intended this video for those who need help with something that just didn’t make sense to me. I had to share with the world.

[@gabe7321]

Thank you so much !!!

[@DaKingUvFishin]

You’re welcome

[@americancastles]

As I always say, I am very thankful for people such as yourself for making life this much easier for the rest of us. Thanks again.

[@zymurgan]

you just saved me some money - not sure how much, but I'm sure it was more than I wanted to part with - thanks for posting this video !!!!

[@DaKingUvFishin]

Happy to help!

[@cesarconcepcion4302]

Excellent explanation. Thanks

[@DaKingUvFishin]

Happy to help!

[@stevenlawrence9930]

My hand roller drivers window SQUEAKS all the Way Up/Down, I tried to spray wd40 but no change! Do I need to take the whole door panel off?

[@DaKingUvFishin]

There is a rail that the window goes up and down on. It probably needs a little bit of white lithium grease. Remove the door panel like shown in the video and add some white lithium grease to the rollers on the inside of the door. This should help you significantly. Here is the link to the grease tube you need. Permatex 80345 White Lithium Grease, 1.5 oz. a.co/d/77dV2AU

[@jonathan472501]

I had the terrible window squeak. Could not figure out how to get the door crank off and this video helped me so much. Thanks! No more squeak for me!

[@DaKingUvFishin]

Jonathan Moore you're welcome! Glad I could help!

[@jsusna1972]

My son's 2006 has a really bad squeak, too. What was the solution? Was it the window crank? Use some WD-40 or silicone spray?

[@jamesthompson7914]

Perfect. Short and sweet.

[@DaKingUvFishin]

Happy to help!

[@rollingthunder5501]

Well done . Very informative

[@DaKingUvFishin]

Happy to help!

[@johnmoesner6784]

Left out the two bolts at the Bottom of the door. didn’t know they were there 😕😐

[@DaKingUvFishin]

2:59 in the video

[@frank1128]

I love KZbin. Exactly what I needed in a short and simple video. Thanks

[@DaKingUvFishin]

Frank you’re welcome!

[@TimmyFannin]

Always wondered how to get the door past the crank handle. Thanks for the video!

[@DaKingUvFishin]

Timothy Fannin you’re welcome

[@Senile_Rambo]

My Service driver caught a vulture with the mirror on our 08, you saved me from throwing a rachet through the windshield, thank you!

[@oscargarcia5098]

Thank you

[@2000Renovatio]

Great video. Helped me out a lot. Thanks for uploading

[@DaKingUvFishin]

Dean John You’re welcome! Did it years ago glad I can help

[@erickrgarcia]

Awesome that you have the manual window handles for this truck. Thanks.

[@1_slow4.66]

The window crank doesn’t have a little metal clip like how the old school ones did to remove it

[@jameshudson9479]

So that’s how it comes off !

[@lz1259]

Awesome work! Exactly what I need!

[@JimmyGreenThumb88]

The hole in the plastic looks like Michigan

[@DaKingUvFishin]

Jj M 😂😂 I backed into a fence with the door open at the time

[@condew6103]

How to remove the Ford window crank -- thanks.

[@DaKingUvFishin]

It shows in the video how to remove the crank. The cable that makes the window go up and down you have to take off the plastic and remove a few bolts.

[@I_know_what_im_talking_about]

Yep. I needed this to figure out how the damn window crank comes off. Thanks a bunch. 👍🏻

[@TSKseattle]

You don't need to remove the crank knob. Just slide a flat screwdriver down the sides at the mount end and pop the cover off and let in dangle around the knob. Mine was a #25 torx bit to remove the screw. Note to engineering, stop using every different kind of fastener on a common assembly. All these screws should be hex drive, torx drive, whatever, and preferably a common size.

[@shannonbrooks8834]

Anyone can take a door panel off, the right way or hard way. Putting it back on... That can be a pain. Why? You forgot how you took it apart. An old fart.....

[@etc865]

You do realize no one can hear you with your back to camera