How to Remove Door Panels on 2013 Dodge Dart

Note: on rear door my video got cut off how to remove the handle part, but i do show how to remove it on the front door prior to going to the rear door. sorry, must have accidently edited it out, trying to get this video up quickly. How to Remove Door Panels on 2013 Dodge Dart.
I show how to remove front and rear door panels

[@smokegrindingwigwom3988]

My door panel is different, doses not have that handle grip.

[@raiderman28]

What year is yours? The drivers sides, usually dont have a handle grip, but similar to take apart

[@smokegrindingwigwom3988]

@@raiderman28 2013 but the door panels are newer ones same on each side. For some reason. I bought the car used with 50k on it and wanted to try and fix a couple of small dents. Who knows what they did to this car before I had it.

[@chynabarnescb]

Exactly mines doesn’t have it neither 😢

[@jimfloyd3292]

2 screws behind door pull t25 . Pop center piece out to get to them

[@raiderman28]

Yes torx t25 behind plastic door pull piece.

[@johnbeckham1483]

Raul, are you related to Tony Romo formerly the QB for the Dallas Cowboys and now on CBS for the NFL?

[@raiderman28]

No. But i do have a cousin that looks like him.

[@johnbeckham1483]

@@raiderman28, that's neat! Replaced my speaker today inside the rear driver's side door panel! The key is having some good quality wedge tools in particular a good nylon set!

[@280Dredfan]

Steven Sagal brother

[@raiderman28]

LMAO. i have never been called that. been called tom hanks, and kurt Russell.

[@exclusivechiraqlive9782]

How do u remove exterior trim off the rear door Dodge Dart 2013

[@raiderman28]

I am not sure on the dodge dart. If there is no screws or nuts that you can see holding it from the inside of the door, then usually its held on by some sort of clips and pops off from the outside. I have never removed one. Sorry i can’t be more helpful, but this has nothing to do with removing the door panel.

[@dwells3536]

Nice video! Used it to replace my passenger side mirror. Thanks man 👍

[@debjaramillo8573]

Is there a way after removing the door panel that the arm rest can be removed from the panel to replace the arm rest?

[@raiderman28]

Deborah Jaramillo if its a separate piece, you might be able to unscrew it. But I am not sure if its a separate piece, since I don’t really look at that. I usually only remove these panels when i tint windows or replace the door speakers

[@QuickShade]

Very helpful, I’m tinting a 2013 Dart tomorrow for a customer. I typically 2 stage windows but with those deep front windows it’s gonna be much cleaner to just remove the sweeps. Thanks again sir

[@raiderman28]

QuickShade yes. Always cleaner to remove the sweeps and also easier to install one stage and take film under seal, to avoid any type of peeling

[@hunnerd4566]

How do you put it back on?

[@raiderman28]

Hunter Peters connect everything ( handle, locking mechanism, switch, etc, then hook it back on to the top door channel ( thick rubber piece) then snap it into place, then bolt it down

[@johnbeckham1483]

Raul, thank you for your door panel(s) removal on the 2013-2016 Dodge Dart as you make it look so very easy to do!

[@raiderman28]

Your welcome, but my name is Raul not Paul. Hahhahaha

[@johnbeckham1483]

@@raiderman28, my apologies, Raul, as I guess it's late and I must be getting tired. Yes, Raul, your video will help me have a blown 6x9 speaker replaced in my Dart!

[@jasminerocks12]

How do you actually take out the actual window

[@raiderman28]

jasminerocks12 sorry i dont remove windows in my videos. But usually after removing the door panel, there is usually a few bolts in the center of the door that attach it to the regulator. And it pulls out through the top at an angle.

[@jasminerocks12]

Okay... I need my window removed coz somebody throw a gum in it and it got stuck, it won't roll up anymore. Thank you!!