Can this guy just go ahead and make a video for every car? This has to be the best how-to video I've ever watched.
@raiderman2823 сағат бұрын
@@MichaelRamos-k7s thank you. It means alot. I try to make them simple and to the point.
@raiderman2823 сағат бұрын
@@MichaelRamos-k7s i usually try to make videos for vehicles that come into my shop for tint. If i have a bit of a hard time removing panels, i will usually try to make a video. Because if i am having a hard time, the average person is definitely going to have a hard time, especially if he or she doesn’t know where to start.
@zelowatch30Ай бұрын
Wow, you put it back easily. It took forever for me to put mine back on.
@raiderman28Ай бұрын
@@zelowatch30 did you take off the rubber seal and clips? Thats the most important part. If you don pull those off the door good luck putting it back on.
@zelowatch30Ай бұрын
@raiderman28 Those top clips were the problem and a hard to snap back on.
@raiderman28Ай бұрын
@ when i put them back on the door, i usually look to see if they are lining up. Sometimes they are a bit too much to the right or left, and are not going into the slotted hole correctly. They will cause issues putting the panel back on and get it to snap back in.
@howied.853713 күн бұрын
Very detailed .best video I’ve seen so far thank you
@raiderman2813 күн бұрын
@@howied.8537 thank you. I try to be as detailed as possible
@LakesideAutobody5 ай бұрын
Great video Raul - thanks 👍
@ronniewilliamson65483 жыл бұрын
How can anybody dislike this video. My guy explained throughly, good video quality & wasn’t mumbling the whole video. You helped me tremendously! Keep up the good work! Thanks for info bro 👍
@raiderman283 жыл бұрын
Appreciate the kind words Ronnie
@raiderman28Ай бұрын
@@ronniewilliamson6548 thank you
@donaldshowe2780 Жыл бұрын
ThanKs alot for your videos I own a tinting business myself and appreciate you. It way easier to pop panals to get a good bottom load on the film. Again appreciate you
@raiderman28 Жыл бұрын
yes sir. thats why i make videos, to help our jobs be easier.
@ethan1993032 жыл бұрын
So helpful! I just swapped out a damaged door and had to swap over the handle, window, mirror, speaker. I would have been so confused trying to put the trim back on but it wasn't so bad with this video.
@kurtledesma59932 жыл бұрын
Very helpful , thanks I actually installed a panel without removing window seal ,what a pain in the a.. to install, now I know there is an easier way!
@Rose-dy1xi6 ай бұрын
Does anyone know where I can buy a replacement for this specific door handle? My current door handle is peeling and I want to replace it, but I can’t find the part anywhere 😢
@raiderman286 ай бұрын
@@Rose-dy1xi probably only at the dealership. The vehicle is too new.
@dylanroberts69153 жыл бұрын
On these 2016-21 malibus do you by chance know if the door lock switch has do be removed without having to remove the plastic welds from the housing bracket?
@raiderman283 жыл бұрын
Not sure. Have not taken that area apart. Usually the actual switches should come off , just a pain to take out
@JustWasted3HoursHere2 жыл бұрын
Great video! Do you know how to remove the black plastic B-pillar trim on the outside of the front door(s) for the 2021 Chevy Malibu?
@raiderman282 жыл бұрын
Sorry, i do not.
@raiderman282 жыл бұрын
Come to think of it, most of those have double sided tape from the manufacture. Many people wrap them or have them repainted
@JustWasted3HoursHere2 жыл бұрын
@@raiderman28 Ah, that explains some things: I found 3 torx screws that were holding it in place: 1 on the interior side of the door frame and 2 hidden under the window seal. But even after removing all 3 screws it still won't come out. I figured it must either be adhesive or something like double-sided tape preventing it from coming out. I'll keep investigating. Thanks though.
@riograndhustla95653 жыл бұрын
Would this be the same process for the 2012 malibu
@raiderman283 жыл бұрын
I don’t think so. I believe those don’t have this weird clips.
@Slickpuller9212 жыл бұрын
I need to replace back passenger window so is there anything special I need to know before starting? Please help
@raiderman282 жыл бұрын
I don’t know, because i have never removed the window before, just the door panel …sorry!!
@ethan1993032 жыл бұрын
I just did this, having someone to help is a big plus. Unlike other cars, the window isn't bolted in but has clips. I lowered the window most of the way, pulled the clips a bit apart and the window pops out. Once you have the detached window out a bit, tilt it to one side or the other until it is free of the tracks on the sides.
@MrZiadmh3 жыл бұрын
On this Malibu do you have to remove the door panel to replace the door check ?
@raiderman283 жыл бұрын
I have no idea. I tint windows, so i have to remove the panels to tint the windows
@ethan1993032 жыл бұрын
Yes
@notyourregularvideos86203 жыл бұрын
This is really helpful
@salvadormosqueda4213 Жыл бұрын
Took off the rear door panels and now the doors wont open, tried opening them from the inside and outside and nothing… any advice?
@raiderman28 Жыл бұрын
Trying pushing the unlock button on the drivers door or passenger switch. Hopefully that will work. Make sure the rod is coming out of the hole on the top of the door panel
@angelzm6301 Жыл бұрын
Great video 👍 , thanks
@JBIRD5752 жыл бұрын
Can I just pop the top on these like Chevy trucks??
@raiderman282 жыл бұрын
On the chevy trucks you can, but on these i have tried to pull back and they are super hard and have not been able to.
@JBIRD5752 жыл бұрын
@@raiderman28 you just need two tools when prying Jeff Welch does them daily....he knows his stuff....join these group tons of information....
@JBIRD5752 жыл бұрын
@@raiderman28 use one tool to pry and metal screw driver on top with pressure to pop clip....
@raiderman282 жыл бұрын
@@JBIRD575 i gave actually remove some of the older chevy cars with 2 tools, but found it a bit easier to do it this way for me.
@raiderman282 жыл бұрын
@@JBIRD575 that how i doe the older ones. Can seem to see the clips on these newer chevy cars. Thats why i have done it this way.
@junebugg19843 жыл бұрын
I followed these instructions & it worked out, but now that I put it back on I can’t open the door from the inside or outside? Any advice?
@raiderman283 жыл бұрын
Sounds like you didn’t attach the door handle cable correctly or door lock. You created a pretty big problem. Your going to have to remove the door panel again. But in order to do that you need to open the door. Without the door being open, your going to have to remove both front seats through the the opposite side of the vehicle. Make sure the car battery is disconnected, because some seats have air bag lights , and you can trigger them. So you want to make sure to move the seat back and forth and take off bolts, but do not disconnect wiring, until battery is disconnected. Then remove one seat then the other. This way you have room to remove the door panel. Hopefully you don’t break anything taking panel off. Once you get panel off, you can try and see whats not connected or if a cable is broken. Did you try hitting the remote unlock button and then open the door from the outside???
@AlexRomo14 жыл бұрын
so helpful!
@DjR3aper3 жыл бұрын
My door latch came undone after i closed the doors. Won't open inside or outside
@raiderman283 жыл бұрын
It will be very very difficult to remove the door panel to get to the inside of the door. I usually recommend pulling in the front seats from the opposite door to make room. You also want to disconnect the battery just before unplugging any yellow harnesses under the seat, if it has them. This are air bag plugs and you don’t want to unplug them while the battery is hooked up. It can bring on an air bag light. Once you have the seats out of the way, start to take apart the door panel and try to get it off. You might want end up damaging the door panel alittle in the process, but you need to get it off, to see why the door won’t open. Once the panel is off, hopefully you can tug on the cable to open the door, make sure the door is unlocked. Good luck
@normcarguy45712 жыл бұрын
great video thanks
@MR-fk5zz2 жыл бұрын
I replaced my back doors now they won't open is there something that I can do
@ethan1993032 жыл бұрын
Check the child-safety lock isn't on
@scripzy12532 жыл бұрын
Does anyone know the name of that little “panel” at the very beginning of the video inside the interior door handle im missing it on my Malibu and I’ve been searching for replacements but I can’t find the name or anything
@raiderman282 жыл бұрын
Interior door handle access panel
@raiderman282 жыл бұрын
If you remove the one for the rear door, it has a part number on it. I believe the front and rear door access panels are interchangeable ( so they use the same part numbers
@raiderman287 ай бұрын
This works from 2021-2023 Malibu. I ended up buying a package of red clips from dealership for further panel removals
@justthatsimpleamerika5256 Жыл бұрын
I just so happened to tint my windows and the cable to the door handle disconnected when the door was closed. Any ideas how I can get to that cable with the door panel being 1 whole piece and the door is shut? Im thinking of trying a hanger tomorrow but looking at this video that may be hard and i dont wanna cut thru the door i just got the car, any ideas anyone?
@raiderman28 Жыл бұрын
You should be able to unlock it from the outside with a key or remote and still open it from the outside.
@ttvreckless579 Жыл бұрын
So anyone about to comment I did this and now the doors won’t open (I did the same thing 😂) don’t pull your seat out either just remove the 7 mm near the door handle and it’s going to take force but pull the top of the door till the clips come out then take a pair of needle nose pliers and give the line a tug and keep trying to open the handle and then the door will open. The problem was that I didn’t clip the line back in the proper spot which caused slack and wouldn’t activate correctly, I hope this helps
@salvatorehowes36410 ай бұрын
jUst got my windows tinted and now my rear doors wont open. ANything to help with that?
@raiderman2810 ай бұрын
Wont open from the outside?
@raiderman28Ай бұрын
@@salvatorehowes364 maybe they forgot to hook up the cable or door lock rod came off
@bleedforme90583 жыл бұрын
Great video, thank you!!!
@Finesse792 жыл бұрын
Awesome! Thank you, thank you!
@raiderman282 жыл бұрын
Your welcome!!
@yousefalshiekh4074 Жыл бұрын
Can anyone please show how to insert the door handle on this car? It has a wire for keyless entry and I don’t know how to insert the wire because there’s zero videos on KZbin.
@xxxracer62 жыл бұрын
Nice work on explaining this.
@raiderman282 жыл бұрын
Thank you
@MarkusWITH_a_k4 ай бұрын
Right on brother
@360milliondollars Жыл бұрын
WHY chevy make there tin like doors so complicated to take off.... Ford is easier to deal with.. Christmas 🎄 that mess up when you pop the door off and just replace them....LOL