How To Remove Fox Body Mustang Front Bumper (1979-1993)

[@dntlss]

Your a lifesaver man,i removed my splash shields like a few months ago to do some maintenance on my Mustang and i'm gonna put them back on in the next few days and had totally forgotten how to reinstall them,lol

[@MorbidThrasher666]

Make a vid for the fenders now please.

[@captainhowdy9557]

Speaking of splash shields , you should make replacements .

[@latemodelrestoration]

Captain - I will pass this idea along to our Product Development team. Thanks! -Landan

[@johndirocco9972]

Prestiege Mustang has the splash shields if you need them i bought a pair and they look fairly new no cracks either

[@dabaiter5939]

You have to remove the bumper to start installing the on3 turbo kit. Is this video a hint that the turbo install is coming soon???

[@jkracinginc.4021]

NOPE……. BUT YOU COULD PUT AN 88mm turbo kit on it, & drill ur HUGE INLET HOLE where the Blue Oval Emblem was in your front header panel!! & it ALSO helps if you are doing an LS SWAP AT THE SAME TIME, 2 REALLY MAKE THAT PONY HAUL AZZ!!😂😂😂😂😂😂😂😂😂😂😂😂😂

[@7493prado]

i was gonna replace the bumper soon, now i know how to, great vid

[@mynameisfrank6519]

Your videos are a life saver! Thank you

[@latemodelrestoration]

Glad we could help Frank!! 💪💪

[@ddteal]

Late model restoration why don't you guys make repop slash sheilds?

[@Jon_Rivera180]

"Why did you take off your bumper?" "Weight reduction brooooooo" Thanks for the upload as always! And thanks for keepin' my fox on the road!

[@MorbidThrasher666]

Because race car,lol

[@staceysims7270]

I agree with ddteal... I’ve looked everywhere for inner fender splash shield’s & can’t find anyone who sales them.i guess i’ll have to check a few junk yards.

[@jolu7019]

Thank you for the video I have an 86 SVO slightly different from this 91. Need to adjust most of the panel it is not a one piece unfortunate. Again thank you

[@kevin95z]

You could make a video of how to install the Fox body Horn Whether you don't have the wiring

[@1calvin]

Does LMR sell the fender screws or know the sizes I recently replaced my horns on my gt and 3 were missing

[@Krossf1re]

No video for the rear cover and support bar?

[@latemodelrestoration]

Not yet, but we can get some new video ideas over to the video team to look into making them!

[@NotMorganFreeman.]

Looked for splash shield push pins on the site but I didn't see any. Are they the same as rear bumper cover push pins?

[@latemodelrestoration]

Since we currently do not offer a replacement splash shield for the Fox Mustangs, the hardware was never considered. I will pass this along to our product development. Keep an eye out in our "New Product" category! New Products: latemodelres.to/79-93-new-products -Landan

[@KingRetro626]

I have a 1983 mustang convertible . Would a 1985/1986 GT front bumper cover fit on my car ?

[@latemodelrestoration]

Because of how the body moldings work, it wouldn't match up to the rest of the car.

[@anthonyvillegas368]

I have a 1990 lx I wanna get a new front bumper and switch to a saleen bumper would it fit on my lx?

[@latemodelrestoration]

Hey Anthony, the Saleen front air dam will fit on your 87-90 LX front bumper. However, the one that we do offer is out of stock at this time: lmr.com/item/CER-4323/1987-90-Mustang-Saleen-Style-Front-Air-Dam

[@erktvr3567]

I want to convert my lx to a gt, will this bumper fit my lx (87)

[@latemodelrestoration]

Yes, a GT bumper cover bolts directly to a car that was originally an LX. You'll need the front extensions and brackets as well. Below are links to the parts that I'm referring to. -Landan lmr.com/item/LRS-16163D/1991-93-Mustang-Gt-Lh-Front-Fender-Extension lmr.com/item/LRS-16162D/1991-93-Mustang-Gt-Rh-Front-Fender-Extension lmr.com/item/LRS-8208A-K/1987-93-Mustang-GT-Bumper-Side-Reinforcement-Panels lmr.com/item/LRS-16162BRKT-K/mustang-front-bumper-fender-spat-reinforcement-kit-GT-87-93

[@sto1asgoetia600]

now that would make replacing the driver side headlights so much easier, that radiator is a hand cheese grater.

[@Acekid187]

Great video. Big help for my fox resto. Do you have a video for removing the fenders

[@jkracinginc.4021]

YOU MUST BE A “TARD” if you cannot figure out how to do that!!??

[@Indiansmoke1]

Thanks for the video. Removed headlights instead of the wells. Did a Race bumper shaved a lot of lbs but you have to weld a Fabricated bracket to hold your Foglights. Don't crank on top nuts too hard or you will warp plastic ..

[@scottg9481]

When are the 1979 to 81 front and rear going to be available for purchase again?

[@jkracinginc.4021]

HOPEFULLY NEVER!! THE ONLY REAL FOX BODY CARS WERE 1989-1993 !!!! I crushed an old 1985 F/B 4 head light Car , (Hatch-Roller) because it was OLD & UGLY!!!

[@rodbars]

You will need rivets to reinstall new bumper, its sad how lmr will make it look easy and not explain the most important parts of installation in every video they just care about selling you parts.

[@rodbars]

@Jason Hawk yeah open your hood and those round things holding the bumper in proper place are rivets if you want a factory look and proper placement you'll need rivets

[@rodbars]

@Jason Hawk no problem, get ready for headaches when restoring the fox just be patient and make sure your willing to spend big money don't go cheap you'll regret it.

[@rodbars]

@Jason Hawk that's sick bro it's hard to find low mile mustangs. You can do you'll have to take the bumper off all together, the rivets are only if your going to swap the bumper for another one.