Thanks for watching! Quick video today how to remove and install your front bumper on your 22+ WRX Like Comment and Subscribe!
Пікірлер: 23
@paintsplatta99 Жыл бұрын
Dude, THANK YOU for this. That little rubber flap in the front groove was the culprit for me and I spent 2 hours trying to get this back on. For whatever reason, every single other video that shows the bumper removal neglects to show the re-installation and that is by far the trickiest part. For others still needing help: once the bumper is anchored at the top, wrap your fingers around the very bottom edge of the black plastic in the front and feel for a little thin rubber sheet. Hold that down and pull out/back until the sheet slides under the intruding part that rests above it. This was the trick that did it for me. The plastic intruding part of the car was in the fender groove that he mentioned but the little rubber sheet was bunched up and it blocked the front fastener holes from lining up.
@MattN034 ай бұрын
That bottom had me stuck too until i found your video. Thanks!
@JoeyMontalto4 ай бұрын
Glad I could help!
@Bossk07710 ай бұрын
I just want to say plenty interesting, but wasn't expecting this to pop up in Muyskerm's PayDay 3 playlist😅
@thes2kguy10 ай бұрын
I guess we know what Bob is driving 😂
@Bossk07710 ай бұрын
@@thes2kguy he mentioned on Distracible that he got a new grill for his car. I guess he needed help installing it.
@mmyers674821 күн бұрын
Bruh . I been struggling with this haha. Got a sub from me. That bottom part was getting me.. this made it so easy now. Thanks
@JoeyMontalto21 күн бұрын
Thanks for the sub! I have other install videos too. Lmk if you need help 👍🏻
@asibley18647 ай бұрын
Super helpful, much appreciated man.
@jeffrenz147 ай бұрын
Thank you 🙏🏽
@andrewthomolaris68743 ай бұрын
Hey Joey, I just had my front sports grill installed and the sides of my bumper and the bottom seem a little loose. Is this normal?
@colew2178 Жыл бұрын
I’ve been trying to put it back on for over an hour after putting a sport grill on and a splitter. Do you think the screws for the splitter would be an issue or prevent it from lining up right
@JoeyMontalto Жыл бұрын
The screws on my front lip were not effecting me installing the bumper. I don’t think there will be any issues with having a splitter installed
@tommieboi7075 ай бұрын
I installed the grill today and broke 2 of those push clips lol. Have to go get some more from local subie dealer tomorrow
@josecerrud10792 ай бұрын
Those clips are much cheaper at car shops.
@NikNikJuice Жыл бұрын
Is there a front camera in the grill?
@JoeyMontalto Жыл бұрын
There is not a camera on mine but there is a small piece that can be removed on the grille for the jdm camera. Not sure if there is a way to hook up the jdm camera
@NikNikJuice Жыл бұрын
Noted. Thanks. Didn’t want any surprises pulling the bumper off a limited. Someone mentioned that the directional headlights operate based on a front camera.
@JoeyMontalto Жыл бұрын
@@NikNikJuice direction of the beam would be controlled by the steering angle sensor. The auto high beams are controlled by the front camera on the windshield/rear view mirror.
@JustisFlame Жыл бұрын
Oh god I’m about to attempt this but it intimidates me for some reason
@JoeyMontalto Жыл бұрын
You got this!
@Claustropbaoeia Жыл бұрын
How about "how to walnut blast the fa24.."
@jonnyperez33233 ай бұрын
By any chance do you know the measurements of the holes for the crash bar back bumper?