Step by step on how to easily remove your bumper carefully. this is useful to remove your headlights. more information at niabodykits.com/
Пікірлер: 93
@matthewbinslidin70554 жыл бұрын
The beauty of Japanese Cars No Rivettes or Over Excessive quarter panels that are impossible to move. Love Lexus.
@NIABodyKits4 жыл бұрын
i agree! Lexus is the best!!
@jparkhku Жыл бұрын
Thanks a lot for sharing. Among all videos available in KZbin, this one was the most helpful for changing a broken parking sensor of my IS250. It took me three hours--one dismounting and two assembling back. A caution for those who, like me, wants to put the same bumper back. (1) Do not pull out the parking sensor as shown in this video because you will break the external ring-rivet and render the parking sensor useless. You need to unplug its power socket, release the retainer side-wide and pull out the sensor from outside (2) It is extremely hard to put the bumper back to the original position, particularly for those six 10 mm bolts underneath . I think it is a work for two, one holding the bumper and another checking the alignment. I did it all alone, and was able to align only 5 out of six. Wish good luck to DIY people here
@NIABodyKits Жыл бұрын
my pleasure!
@Unplugged7042 жыл бұрын
Wow that was easier than I thought! I have 08 IS350 and thinking of replacing front bumper with the gen 3 versions.
@NIABodyKits2 жыл бұрын
This was the NIA Bumper. Not all conversion bumpers have the same fitment.
@masmargat69073 ай бұрын
Hey yo thanks for this how-to! Watched this everytime I've had to remove the bumper on my IS to make sure i don't forget anything!
@NIABodyKits3 ай бұрын
Glad it helped!
@AnM8tR Жыл бұрын
I could not figure out how those flathead clips came off! Thanks!!
@NIABodyKits Жыл бұрын
my pleasure!
@jumpinghighest Жыл бұрын
Great video! Would love to see one installing the bumper back on the car. Thank you!
@NIABodyKits Жыл бұрын
thank you!
@notyourbusiness135210 ай бұрын
Just reverse the video
@jumpinghighest10 ай бұрын
I was able to figure it out doing that. Thank you!
@gplunky5 жыл бұрын
Thank You
@alwayscuriousalwayslearnin3 ай бұрын
thank you for the video. What a hassle I miss the old days when it would be 6 bolts the bumper comes off, also the bumper actually had a purpose of safety not just looks lol, now days you remove the bumper and possibly break some clips so you might as well buy new clips beforehand
@NIABodyKits3 ай бұрын
Yea, old days where really different, Now days you have to be really careful to actually install and uninstall everything specially in the car community
@ltdees23624 жыл бұрын
Hey thanks, I have a 2011 ES-350 very similar removal to your video...manly just a matter of knowing where the clips are located...and take your time...piece of cake...🍺's on me 😎
@NIABodyKits8 ай бұрын
no worries brother glad we were able to help
@deceasedddd8 ай бұрын
thanks for making it easy and simple
@NIABodyKits8 ай бұрын
No problem brother
@dlumsf3 жыл бұрын
Great video! Thanks!
@NIABodyKits3 жыл бұрын
Anything to assist our valued customers!
@hrandmahmoudi1475 ай бұрын
Thanks for this great video 🌹👏
@NIABodyKits5 ай бұрын
Glad you enjoyed it
@theunstoppabledriver69784 жыл бұрын
Thanks for the vid. LOOKS easier than I thought. Over the years I think at least half or more my clips have been damaged by mechanics and/or service places who installed new headlights/fog lights... Any suggestion on good clips/generic clips and where to order/buy? Thanks!!!
@NIABodyKits4 жыл бұрын
my pleasure! and try lookinf for the clips on amazon
@zectorbroskii77052 жыл бұрын
Any tips on bumper cover sites
@mandomedia6299 Жыл бұрын
very helpful video thank you soo much for sharing
@NIABodyKits Жыл бұрын
Glad it was helpful!
@ronsnoey3 жыл бұрын
Thamks man very helpfull and a good nice film
@NIABodyKits3 жыл бұрын
my pleasure! thank you for watching!
@MatteoTodd Жыл бұрын
Don’t you have to remove the bumper to change your turn single bulbs on the second gen is 350s? If so this is a helpful vid for that
@edsumil9174 жыл бұрын
Thanks now I have to look for a replacement bumper any suggestions if aftermarket bumper can fit the is250
@NIABodyKits4 жыл бұрын
we offer a 3is bumper conversion, here is the link use the rep code "12yrs" to save 12% www.niaautodesign.com/shop/2006-2007-2008-2009-2010-2011-2012-2013-lexus-is-nia-conversion-3is-bumper/
@acetate62 жыл бұрын
Nice Video! Are there some proper options for Aftermarket Splashguards, mine are somehow gone on the Driversside
@NIABodyKits2 жыл бұрын
thank you and sadly we dont produce splash guards for this car
@A33C1A895 жыл бұрын
Thx
@cedrotoro980611 ай бұрын
Great video
@NIABodyKits11 ай бұрын
Thanks! 🙏
@hd-xx7ki2 жыл бұрын
thank you!
@NIABodyKits2 жыл бұрын
my pleasure!
@vijayparsan86303 жыл бұрын
Nice video man. I like those rims. What are they?
@NIABodyKits3 жыл бұрын
thank you! and not sure what kind of wheels they are
@A33C1A895 жыл бұрын
Hi. Have 2010 Lexus rx350 Similar removal of bumper? Have dent I want to heat and try to pop out. Suggestions on dent?
@NIABodyKits10 күн бұрын
maybe by heating it up, and using something that can suck it
@bendude67484 жыл бұрын
when the bumper goes back on does the undertray bolt to the bottom of the bumper tabs or do the tabs go underneath? Hope that makes sense.. thanks. I just replaced my bumper for a new one and wish I took photos first lol..
@zectorbroskii77052 жыл бұрын
Where did you get the replacement homie
@crazymn321fan2 жыл бұрын
Any chance you remember the answer to this? Tore up my bumper on the freeway and finally have a replacement 6 months later lol.... Can't remember if the splash shield clips go above the bumper tabs or bellow...
@NIABodyKits8 ай бұрын
below
@ballzzinyourmouth88 ай бұрын
@@NIABodyKits3yrs later
@shem37374 жыл бұрын
I wish they (NIA company) would continue to produce the 3is conversion front end kit. It's a bummer that they stop producing it, not sure why.
@NIABodyKits4 жыл бұрын
the mold needs to be resurfaced, we may bring it back in the future
@shem37374 жыл бұрын
@@NIABodyKits Thank You for your reply. Hopefully it will be soon. Please notify me when you start the new production.
@yolandareid80854 жыл бұрын
Do you have a part number for the splash guard for the Lexus IS250? Trying to source it but unsuccessful. Thank you.
@NIABodyKits4 жыл бұрын
which splash guard would you be referring to?
@johnthenative83684 жыл бұрын
Wheel well cover maybe?
@notyourbusiness135210 ай бұрын
My two screws L&R, the one you unscrewed at 0:55 is wayy too tight even my screwdriver tip broke. How do I deal with that? I've put WD-40 on it as well.
@NIABodyKits10 ай бұрын
Try using a socket instead of the Philips.
@jumpinghighest Жыл бұрын
Great!
@NIABodyKits Жыл бұрын
thank you!
@patrickbacomo78978 ай бұрын
Hi can I fit the 2008 Lexus IS-F sport bumper into the IS250 as a conversion? If so, Where is the most reliable place to find them?
@NIABodyKits8 ай бұрын
hey, unfortunately we discontinued this bumper
@KSJZ004 жыл бұрын
Just like so :) 👍
@NIABodyKits8 ай бұрын
yes sir
@kenny0ly4 жыл бұрын
Where can I purchase the legit front bumper part?
@NIABodyKits8 ай бұрын
sorry we discontinued this product
@memegames6743 Жыл бұрын
The 2 Phillips head screws on the top seem to be stuck for me
@NIABodyKits Жыл бұрын
try using a drill to get them out, might be stuck due to age
@slayer11294 жыл бұрын
do you know if a 2011-2013 is 250 front bumper can fit a 2009 is 250?
@NIABodyKits4 жыл бұрын
i believe it can because the body of the car was the same from 2006-2013
@slayer11294 жыл бұрын
@@narrowempress1625 did you do this to your 2009?
@harveyandruss8748 Жыл бұрын
What about swapping fog lights in old bumper to new? Struggling. lmk
@NIABodyKits Жыл бұрын
you can use your factory wiring for fog lights, would all depends on how the new bumper foglights are
@harveyandruss8748 Жыл бұрын
@@NIABodyKits the bumper cover I purchased was just the plastic. There are a couple of snaps that hold the fog lights that are a little picky to get to release. Then you just fit them to the new bumper and connect the electrical connector. My issue witb all of this as a DIY layman is that they seem to purposely make it a pain to remove so people wont DIY. It'd be great if cars were designed for repair and maintenance ease.
@Othawize7213 жыл бұрын
“Just like so”
@NIABodyKits8 ай бұрын
yes sir
@ballzzinyourmouth88 ай бұрын
@@NIABodyKits3yrs later
@baksa61715 жыл бұрын
How about the 2017 lexus ct200h f sport sir?
@ambassadorfuneralhomes75194 жыл бұрын
It's pretty much the same exact process.
@NIABodyKits8 ай бұрын
lol
@youarewhatyousmoke75883 жыл бұрын
What about just the grill
@NIABodyKits8 ай бұрын
so sorry we discontinued that
@98KidCOOL125 жыл бұрын
Wats the song??
@NIABodyKits8 ай бұрын
lol
@bosmanragga513 жыл бұрын
Peace
@NIABodyKits2 жыл бұрын
✌️
@Othawize7212 жыл бұрын
Just realized it's an is350 like so
@NIABodyKits2 жыл бұрын
Yes correct.
@rubbertoe.3 жыл бұрын
Took me over an hour to get mine off, what a pain in the ass
@NIABodyKits3 жыл бұрын
these bumpers are pretty hard to get off the first time around
@greenkingrebels7882 жыл бұрын
Yeh and you have to do all that just to change the indicator bulb. Crap design
@NIABodyKits2 жыл бұрын
Changing the headlights to the v-lands is also a great upgrade.