HOW TO REMOVE PRINTER INK FROM YOUR EPSON 2720 PRINTER | WE NOW HAVE $14.99 SUBLIMATION GANG SHEETS

[@lisamb4269]

Like a Dummy, I went and put the regular in in my new sublimation Printer. I specifically asked the Walmart Electronics rep, if this particular printer did sublimation. She said yes, but failed to tell me not to put the regular ink in it. A friend told me, that I had to purchase a new printer. So i went on here looking for ways to empty the cartridges, thank you!!! Will be doing this today. I'm pretty tech savvy, so I'm confident I can get this one. I want to start sublimating. My sub ink came, and so did my coffee mug heat press and mini press. I'm excited to learn!!! new Sub!!!

[@StraightOuttaContent]

I hope you read this before you go and jack your printer up. PLEASE DO NOT PUT SUBLIMATION INK IN THIS PRINTER THINKING YOU ARE ABOUT TO HAVE A SUBLIMATION PRINTER AND DO A BUNCH OF CRAFTS! This thing is not meant for sublimation. Please watch my updated video where I warn people do not do what we did!!!! If you are looking for a full color answer, we sell DTF transfers and have been since 2020. We currently only print on Mimaki DTF printers. Once again, do not! proceed with this printer unless you are using regular ink. Its a great regular ink printer that we still use today because we can buy the regular ink off amazon for super cheap.

[@jenniferhulliberger1312]

I just did the same thing today. I’m so mad. Didn’t even realize it wasn’t sublimation ink. First 4 steps of setting up your printer is adding the ink.. I wish I didn’t add the ink. I’m so upset..

[@lisamb4269]

@@jenniferhulliberger1312 Girl, I'm pissed too. The idiot that sold me my printer, i said does the label say SUBLIMATION??? she goes yes, then she failed to tell me not to put the REGULAR in ink. I removed all the regular ink out of my printer. I syphoned it out, and it still doesn't work. I'm a tad bit livid. Have to go by another printer. I 100% totally feel you!!!

[@lisamb4269]

@@StraightOuttaContent Thank you for the response. Sorry, i just saw this. Lesson learned, i will due my research prior to learning about sublimation. I'm going to get another printer. Thank you ma'am...the one i bought was like a 5,100 series. Again, very useful information, Stupid mistake on my part.

[@NotTodayGeraldine]

Omg thank you both for saving my life. I’ve had a terrible week, so when I thought I’d even ruined my chances of doing sublimation on my printer, I honestly almost cried. 😂

[@ericamorgan8344]

Thank you so much! I am new to sublimation and I put the ink that came with my printer in it. So this video really help me

[@StraightOuttaContent]

Awesome but make sure you check out my newest video if your printer decides to stop working all of a sudden we have a fix video

[@jgomez7639]

@@StraightOuttaContent can you please tag me in that video? I followed your steps to empty the existing ink now I’m getting an error 😩

[@AllovertheSpace]

Thank you thank you thank you I was wondering why my tumblers weren't sublimating. Wasted so much paper Ugggh😩 I appreciate you guys so much.

[@staceygriggs8602]

Did it work

[@vagary3403]

I just did the same damn thing

[@jodycave7925]

This video is a godsend. I have been told over and over the epson had to be brand new to switch to sublimation ink. I was determined to find a way to switch inks. And here you are. I just wanted to do some sublimation projects for our car club so didnt want to buy a new printer (after I switch I will buy a new printer for myself and use this old one for the club). Thank you so much for sharing this video

[@isahcavallaro99]

You are the best!!! I have searched and searched for a good video that was simple and to the point. THANK YOU THANK YOU THANK YOU!!! I almost gave up on this whole thing!

[@StraightOuttaContent]

lol You still might want to give up this entire process. This ended up not working in the long run and we out regular ink back in this printer. We manufacture DTF transfers now. No longer have a need for sublimation. This video is actually super old. We suggest you check out our more recent content.

[@roxmarie535]

You totally just saved me!!! I couldn't find a video in English that didn't make this sound ridiculously hard to do, but you guys made it easy to understand and being new to sublimation there aren't a lot of videos that really help! Thank you all so much! So glad I found your video and will be watching the others to learn how to put the sublimation ink in and what ever other tips you've posted! Thanks again!

[@StraightOuttaContent]

This is a very old video, we would not suggest doing this. We actually print 22x24 DTF sheets for all of our apparel needs and 22x24" sublimation gang sheets as well for all our sublimation customers. Please take the time and check out some of our most current videos.

[@nickichappell371]

Thank you for keeping things short, sweet and to the point! Y’all my new favorite power couple! I’m happy I found this video🙂

[@StraightOuttaContent]

Definitely check out our updated video. This video is very old.

[@shericewilliams1045]

Thank you for your knowledge! Equipment is very expensive and you two are a blessing to share your knowledge to keep it up!!

[@StraightOuttaContent]

This is super old and please don’t do this. We sell full color transfers and DTF printers if you’re interested

[@raschoneavila8388]

Thank you so much! Your video keep me from replacing another one. So easy

[@StraightOuttaContent]

This is not a good fix. Please check out our most recent videos. We suggest getting a mimaki printer

[@lisalamere7335]

My printer does not lift up like that. It’s latched. And I don’t know how to unlock it.

[@VlogwithK_]

You helped me tremendously!!! Wish i had a smaller syringe and gloves but I got it done!! Thanks so much!!

[@StraightOuttaContent]

Yea this is a super old video. Not a good idea if you are looking for a full color transfers. Hence why we have in the description not to do this.

[@jenniferjones4557]

Omg!! Thank you so much. I bought this printer in 2021. I only used it 4times. I decided to use it yesterday and learned my printer heads are clogged and it's FULL OF INK . This saved me! I still gotta buy another printer but no ink. Thanks

[@StraightOuttaContent]

This video is super old and we stopped using this printer years ago. Definitely check out our more recent videos

[@Cynfful]

Where do we buy the cleaning kits

[@JoiApple]

Can I just say THANK YOU!!!! here i was thinking i messed the ENTIRE process up but then you should such a simple solution and my printer was saved!!!!!FYI this technique works for the Epson ET 2850 as well. People you dont need a needle to make this work just simply "kiss the syringe and tube together" and it works just fine!!!!!

[@StraightOuttaContent]

We are glad that this video helped but this video is very old. We no longer use this printer for sublimation. Please check out our most recent videos because we are now the largest manufacture of DTF in the country. We print high quality commercial grade DTF full color heat transfers. We also have sublimation gang sheets as well. Check out our videos and email us at [e-mail] for more questions.

[@mrspatterson20]

My epson et 2803 doesnt have the screw in top right how can I get the top off?

[@droan9100]

Your video saved my life. Lol. I put the azul in the magenta tank when refilling it and this helped me get that out and get right with the world again.

[@ArtsyCrafsyChick]

Thank you!! This is the best explanation I've seen!❤❤❤

[@StraightOuttaContent]

This video is super old. Please check out our more recent videos especially if you are looking for a full color option

[@Les_NB]

Thank you!! I was going to get the solution, but this easier, less messy, and less expensive! I just cleaned my ET 2750!!

[@StraightOuttaContent]

This is a super old video. I wouldn’t do it again. If you’re looking for full color prints I suggest you check out our more recent videos because we manufacture DTF transfers now

[@TaylorWelle]

Seriously so helpful -- I thought I was going to have to have an entirely separate printer and everything in order to do this. Thank you so much!

[@noemigonzales2809]

My 2720 went out and it is full of ink, Thank you for the video I can now remove the ink and place in the new printer once its comes in. Your video was so clear and easy to understand. i will also be going to the FCD site

[@StraightOuttaContent]

THANK YOU SO MUCH!!!! we worked very hard on that video and my wife @flashcustomdesigns will appreciate the sub to her channel

[@glennaoconner]

I'm glad I found this video. Finally a very pragmatic guide. Many thanks for it

[@StraightOuttaContent]

This video is very old. Please check out more recent videos

[@JPate-mb8te]

Thank you so much for sharing this video. With your help I was able to successfully remove the ink from my Epson 2800! Truly appreciate you! ☺️ 🙏🏽

[@StraightOuttaContent]

Super! Old video please check out our new content and our website flashcustomtransfers.com for all your full color DTF transfer needs

[@stebashley]

Thanks for posting this video! Followed it exactly and worked great!

[@StraightOuttaContent]

Please know that this printer will break on you. Please check out my most recent video on this printer. We sell DTF Transfers printed from Mimaki's so if you need a full color transfer please let us know

[@ciaranajera2395]

Can I change my sublimation ink to ecosolve ink? I wanna do this to my epson 7210..?? Help please.

[@beckyjackson4428]

I am so upset! I was not paying attention and i put the blue in the yellow spot! I am an idiot! Help!!

[@korettamiller7737]

So what do i do to get he ink back inside the cartridges

[@amandasanchez1475]

I did exactly what you did in the video and now it's printing blank pages! What am I doing wrong did I miss a step plz help!

[@kaylakayko882]

Me too!! I need help also please

[@lesliebriner7579]

I did this exactly like you did as well. Now my printer 🖨️ is not printing anything at all! 😭HELP PLEASE

[@kaylakayko882]

@@lesliebriner7579 you have to get the air our of the lines !! It worked for me. Hook your syringe up to the end you didn't suck from and just start sucking air out with it. .. it will eventually start pulling ink ! I hope this helps you ❣️

[@mirandaLegorreta-m9f]

hello, do you know how to issue ink charging on epson et 3760 model i drained and added new ink now i need help getting ink from tank to cartridges. I've also tried factory resetting but have not had any luck.

[@StraightOuttaContent]

@@mirandaLegorreta-m9f no. We are manufactures now.

[@anthonirodriguez2537]

For anyone wondering how to properly dispose of ink! Take it to your local staples or Office Depot. We take ink recycles and dispose of it properly for you! Do not throw it away

[@rosalindasanchez1923]

Does Office Depot recycle the ink and remove it for free?

[@hannahlynn8208]

i switched my inks today & converted to sublimation. For some reason my ink is not going into the cartridge

[@marinemanga9875]

Thank you!!! I'm dumb and thought my sublimation printer came with sublimation ink lmfao. Now I need to clean it out and put sublimation ink. No wonder my designs would transfer.

[@StraightOuttaContent]

Please don’t do this. If you’re new and are looking for a full color design, don’t use sublimation. This video is super old. Please check out our more recent videos. We’re one of the biggest companies for DTF transfers.

[@StarsHallow]

@@StraightOuttaContent do you know how to get the printer to charge and bring the ink back into the lines again? I tried holding the ? And pause button down at the same time because that’s a factory reset option (I THINK i don’t really know)… any suggestions? I will check out your DTF prints as well. TY so much

[@mandiraecoder7927]

I didn't see the links to the other videos or how to get on your wife's site... I loved this video!!

[@StraightOuttaContent]

Its right there in the description

[@nurseaprn97]

Can you remove the sublimation ink and use as a regular printer?

[@StraightOuttaContent]

Yes, but we have a video showing how you just put regular ink inside and then print on paper

[@annamain1]

I already have sublimation ink in my printer , but I want to change to cosmos sublimation ink , do I need to drain it if I already have sub in it ?

[@StraightOuttaContent]

Nope just add the new ink, this is a very old video so please check out our most recent videos about our dtf transfers and our sublimation gang sheets. Are you familiar with DTF?

[@murphy75571]

I've tried everything and can't get ink out? What am I doing wrong?

[@jasanie]

I just took my printer out the box and put the original ink by mistake I haven’t done anything with it bebidas filling it with the wrong ink do I have to do all these steps ?

[@StraightOuttaContent]

No, this video is very old and we do not suggest doing this. Check out my latest video on this printer and sublimation ink. We currently manufacture 22"x24" DTF transfer sheets and 22"x24" Sublimation Gang sheets as well. Check those out, it will save you a lot of time and money.

[@melissafitchett7565]

i cleaned the old ink out and put new in but when i print nothing comes out. what did i do wrong????

[@StraightOuttaContent]

Super old video. Please take a look at our more recent videos now that we are the largest manufacturer of DTF and UVDTF. Visit our website at flashcustomtransfers.com or email us at [e-mail]

[@crcdesign9886]

Can you buy separate tanks like you can for the workforce printers?

[@renbay2813]

I’m going to upgrade my printer like this but it’s filled with sublimation ink. Is it not possible to reverse this and remove the sub ink and repurpose to inkjet?

[@StraightOuttaContent]

Yea I have a video on exactly that.

[@renbay2813]

@@StraightOuttaContent excellent. Thanks for replying so quickly 😃

[@isellalotoncraigslis]

Best video by far! Thanks!!

[@Littlemismartha]

Why not just use the rest of the ink until it gets low then put the sub ink in it until the ink pushes through?

[@brendaromero7642]

Great video, cleaned out ! But now it’s not printing anything. What did I do wrong ?

[@StraightOuttaContent]

My new video on this has just posted! Please watch it you will learn so much

[@Josh-qf3uc]

After doing all these steps I printed a picture and it came out faded what did I do wrong

[@samanthanicholson9015]

I got a clog or something it didn't work awhile after a power outage, then had to redo install, it's working then we replaced ink and stopped printing. I don't see color on the front and it prints now but very light. Do you think the printer would work for something else?

[@PlayKun-Channel]

Thank you!!! it was very helpful cuz the machine I got has some bad old expired ink, gotta pump them out!

[@SweetThirties]

Thank you so much I just thought I had to use all of my ink first before putting my sublimation ink in . Great and useful information

[@lexievz2593]

Where do u purchase the syringe cleaning kit for an Epson eco tank 15000?

[@deannboyne1976]

That's what I want to know where to get the kit cuz I need one

[@mechellelloyd4730]

Please help!! I accidently put regular ink into my black ink tank that was about half full of sublimation ink. What is the best solution? I have the Epson ET-2760

[@StraightOuttaContent]

This is a super old video and we now sell Mimaki Sublimation printers. The ink mix wont hurt it but you wont be able to do sublimation. We did this when we went back to regular printer ink and use our printer as a normal everyday paper printer. Which we love because ink is sooo cheap on amazon. But if you are looking for full color images for apparel or full color images for accessories, then please check out our more recent videos.

[@debbieyoung7186]

Hi I only put a little of epson ink in the cyan sublimation will it make a difference will I have to drain it I haven't run it yet only to set it up. Please help not even done any sub blanks on this machine, I felt sick after I have done it.

[@StraightOuttaContent]

I am uploading a new video on this entire subject as we speak. Please stay tuned with your notifications on so you dont miss this very important video about these printers.

[@lindseyknox1060]

I just swapped inks and printed a few things to drain the rest of the ink, tried to sublimate and it wouldnt transfer.. i assume i dont have all.of the ink out? What now?

[@justinelambert4129]

I have a different model. Will I still follow the same steps?

[@jillmartin5402]

Hi guys I followed your tutorial and the ink doesn’t print please help

[@netaunger4201]

Hi there, I followed all these instructions and it worked well, I filled it up with sublimation ink, now It won't print color, only black, help please!

[@MasterRudiment]

Great content! I enjoy the energy, too 😂😅

[@mallorikerr4092]

My husband said no to a new printer, but he said if i can drain my current epson, i can get the ink.....hmmm🤔 thank you for your help. I am going to get another epson ecotank so i will be keeping the ink to use in it when i get the money to use the ink i pull.

[@StraightOuttaContent]

Don’t do this, old video. Please watch new videos, if you’re looking for full color options we have been printing DTF transfers since 2021

[@burakburak1173]

Hello. I have a problem with the ET 2814 printer. At the same time, 4 lights flash, namely the power button, the lower wifi light and both ink lights. When I plug the printer directly into the socket, the printer turns on automatically, the power button does not work because when I press it, the printer will not turn off. I am asking for help.

[@loribuj62]

Can this way be done with an ET2800 printer?

[@rachealwilliams1960]

So I put in regular ink because and then found out that it wasn't the sublimation. So then we removed it and but in the sublimation ink in. But it's still not working. I have a Epson 2800 sublimation printer the right ink now and the right paper what do I DO?

[@southernsteeldreams5427]

Can I do these steps to change my/Sublimation printer to Eco Solvent Ink?

[@larissaabreu6629]

My case was tottally different, I change for sublimation ink and they ruin all my t shirts, they look blurry, do you know what is the problem? what kind of papr do you use it? please help!!!!!

[@StraightOuttaContent]

We have more videos on how to fix this please watch them. We now are the largest manufacturer of DTF full color heat transfers. So you can ditch this printer and get your peace of mind back. This video is super old so please check out our most recent videos

[@user-kq9yd6ih3v]

What about if you get an error that the ink pad is at life end? Thank you for the video

[@ShirleyBennettTexas]

Can you remove regular ink from a epson 2400? We cannot figure out how to get into it after removing the screws as the top doesn’t open all the way

[@microtasker]

So is anyone flushing their systems with alcohol or is that just not necessary?

[@StraightOuttaContent]

I am uploading a new video on this entire subject as we speak. Please stay tuned with your notifications on so you dont miss this very important video about these printers. Its not necessary. We have the easy solution video to fix it but I did an even better video today because this keeps happening to all of us.

[@JoscelynR]

I have the Epson 2803 and I took out the screws but it didn’t do anything. And I can’t figure out how to take out the ink.

[@HeatherPorter-r6c]

So my new ink kit didn’t come with a syringe. Where should I get some at?

[@brendanichols9067]

Need to remove ink from 4760 but i don't have the 2 screws in the front

[@nellykarpinski799]

I made the mistake of adding the regular ink. However, I removed it and converted it to sublimation. I ran a ton over 100 sheets, and my sublimation still does not transfer. I don't know what I'm doing wrong. I have sublimation mugs and tumblers. I have the sublimation paper. Do you have any idea what the problem could be? I emptied as much as I could.

[@sherrylynn7771]

I put in a different brand of sublimation ink into my printer. Now it isn't printing blue and the black is brown. Do I need to do this and put new ink in?

[@tammimilos770]

I just did this whole process over 2 hours ago and the new ink is not filling up into the cartridges… ive done all the nozzle cleaning, head cleaning like 6 times now, printed out over 12 pieces of paper and still nothing….. any suggestions?

[@EmberBusby-ty4id]

That's the problem I'm having to. Did you ever get it fixed?

[@cristinalifestyledyiprojects]

Thank you both !!! Great video

[@biancamitchell1420]

You sublimated onto that cotton hoodie? Pls tell me how before I send this printer back

[@StraightOuttaContent]

We didn’t. This is not a real printer. Please read the description.

[@kelh7987]

AAAAAhhhhhh!!! I did the taking out of ink. It was easy and done with little-ish mess. I put in some new Hiipo sublimation ink...and nothing. No ink on the pages. I did all the maintenance buttons and nothing. I have ran pages thru dozens of times and nothing. HELP what do I do now???

[@secondchancechurchofdelive7695]

Hey I was just watching this video, I was about to toss my printer, but was curious to know if this method will help me to unclog my black ink tank on my Epson 2720 printer. I' ve tried print head cleaning, and purge sheets, you name it. My other color are printing just fine.

[@ClipanBeats]

did everything, now all lights flashing and black ink is getting smudged all over

[@StraightOuttaContent]

Very old video, check out our new videos. Sublimation is a dead art unless you are using it for large fabrics.

[@khmer_4ever501]

Hello can you please help me, i already did my printer to sublimation but now I’m printer clogged well since I haven’t used for awhile and I did all the stuffs but still not working also my lnk kinda low I’m sure to order more if my printer can’t help . Is any way I can save my printer? Thank you in advance

[@GayleAdams-zd8um]

Do you have to clean anything else

[@StraightOuttaContent]

Don’t do this. Very bad and this printer is not good

[@kandi2421]

thanks i got my printer sublimated but now im getting a area wat should i do

[@DebraLyman]

Hi, I have sublimation in my ET 2720 but it has been sitting for over a year, how long is the ink good, trying to use printer but it's not printing😬

[@charmainehess920]

Hi I put the wrong ink in my sublimation printer, I did watch your video on how to remove the ink. Did that but now my ink won't get to the carrier. Can you help.

[@iAmBigKountry]

Thank You So Much This Video Is My Lifesaver!! I Have Subscribed, Liked, & Comment!! You & The Mrs Are The Best!! Subscribed From Alexandria, Louisiana!! Will Be Making A Purchase From The Company Also!!

[@StraightOuttaContent]

Ditch the sublimation printer! Try our $19.99 22x24 full color heat transfers! Check out all the videos on our channel

[@paigesmith2614]

I just did this yesterday, but my printer is not printing anything now. What should I do?

[@StraightOuttaContent]

@@paigesmith2614 this isn’t a sublimation printer. Please check out my more recent videos

[@daniarifai6610]

Hello, by the way, there is an easier way. I tried it and it worked. If you like you can make another video and try my method. I just opened one color at a time and put the empty ink bottle on it. And flipped the printer over the sink, just in case. It worked perfectly and all the ink went back into the bottle. I repeated that for all the colors. Then I just let the small amount of ink that was left in the printer drain into a container in the sink. It worked out fine. I used acetone to get some small splashes off. But I think my only mistake is I should have tapes the lids of the colo compartments on the printer open. That way no splashes of ink. Also, tape the scanner lid and the paper tray so they won't break or cause any trouble. Good luck 😊

[@TabithaRJohnson]

Where is the link for the sublimation ink kit?

[@coreygamble835]

What size syringes cuz the link for sublimation ink didn’t come with any

[@firsttimeforeverythingcraf6155]

Hello, I have sublimation ink in my 2720 and my question is, will it be the same process if I wanted to change my sublimation ink to eco solvent ink? Thanks in advance

[@StraightOuttaContent]

I wouldn't do that because that will damage the printer. If you are looking for a way to make a full color print for apparel check out our more recent videos and our DTF transfers.

[@precioustyler8808]

Soo! I’m devastated. I did this, and then saw another video that said we shouldn’t do this, after I’ve already done it. My printer now had an error saying scanner epson et 4700 scanner error 10077. I cannot get passed this error and I do not know what to do! Can someone tag me in the new video? Or provide any assistance?

[@StraightOuttaContent]

Check out our current videos. This printer is not designed for sublimation. We manufacture DTf transfers and sublimation sheets. 22x24” sublimation sheets for only $14.99 whatever you can fit we will print.

[@GinaMenera]

I took my Epson 3600 back from my daughter to use as my regular printer, and chose to convert my newer, but fewer bells and whistles ET 4800, to sublimation. I was using it as a regular printer, so when I pull the ink out, can I use it in the other Epson EcoTank?

[@StraightOuttaContent]

TOP 5 REASONS NOT TO USE SUBLIMATION IN 2023 | THE EPSON 2720 PRINTER IS THE WORST PRINTER EVER! kzbin.info/www/bejne/nobLm6yJi92LiLs

[@hertoy1103]

I need help I’m using the Epson 4800 sublimation ink and using sublimation paper and heat press but nothing is is happening no design is sticking also caps are acrylic have I have a deadline for this Sunday, can’t return caps

[@nicolemoore879]

Can I use this method to remove eco solvent ink?

[@StraightOuttaContent]

No. It will damage the printer

[@lesliefelder1124]

My ink isn’t going into the printheads anymore from the lines what do I do.

[@StraightOuttaContent]

Ditch the sub printer and get our $19.99 22x24 heat transfers!

[@foodpampering]

Thank you for the video. So I have sublimation ink in my 2760 printer but I mixed it with another sublimation ink and now I think the blue and red are clogged. Can I do what you just did to flush it out?

[@StraightOuttaContent]

No. Do not do either. This video is very old. Please check out our newer videos on how to put regular ink back in your printer before breaking it. Cause it will break if you continue to leave sublimation ink in it.

[@foodpampering]

Ok gonna look now. Thank you sooo much.

[@shantelideas]

Good loved the video but I am wondering if it's better to buy a new printer or get the kit and take out ink. HELP!

[@StraightOuttaContent]

Its better to throw away the printer and get our $19.99 22x24 heat transfers

[@Jalapeno_Wolf]

OMGosh, I'm only 2 minutes in and y'all are too cute!!! :)

[@StraightOuttaContent]

Haha super old video please check out our more recent content

[@bluelv702]

Thank you so much for this video. Good luck and lots of blessings to you both. 🙏🙏🙏🙏🙏🙏🙏🙏

[@StraightOuttaContent]

No problem, this video is very old so please check out our most recent videos on our new products.

[@Khadjs1804]

Can I use this method to convert my Epson ET-2800 with regular ink to a sublimation printer?

[@sharlenewyllie4676]

I have an Epson Ecotank ET-2800 can you help with that it have a clip in the corner so it's not opening up straight like this one

[@chrissyhoyle5799]

Mine has a white cover over it after you open the top. The back cartridges you removed first. How can I take it off?

[@sharonjohnson3466]

Love it I’m going to put in my regular ink then will make it a sublimation printer later ..Thank you

[@StraightOuttaContent]

Thank you for watching! This video is very old. Please check out our more recent videos HOW WE MADE OVER $300,000 WITH OUR BUSINESS IN 2022 | HOW TO GROW YOUR T-SHIRT BUSINESS IN 2023 kzbin.info/www/bejne/aIi2dWqiodd1bKM

[@terriboone2316]

I have been searching for these answers. Y’all are awesome. Question 🙋🏼‍♀️ I did like many others and bought the printer and put the ink that came with it in the printer thinking it was sublimation ink so I ordered sublimation ink. My question is do you know the size of the syringe because I would like to not have to buy the kit seeing how I already have the sublimation ink.

[@StraightOuttaContent]

Thanks for watching, this video is very old and could mess up your printer. Please watch the most recent video where I show you how to change your ink without damaging the printer We also sell sublimation gang sheets and dtf products. We suggest you go through all of our modern videos

[@terriboone2316]

Wish y’all would have left the links you spoke of. I watched your newer video about don’t sublimate anymore but I’m not doing it for business and I’m doing tumblers and stuff other than clothing but will look into your products when I do want to do shirts

[@StraightOuttaContent]

@@terriboone2316 We do sublimate. We have many videos of us talking about our $14.99 22x24” sublimation gang sheets for tumblers.

[@terriboone2316]

Well I have tons of blanks. All sorts. I’ve spent the money on this new printer (a little under $400) and I just got my Tumblr heat press in the mail yesterday (also a little under $400) so I just ordered some syringes off Amazon and I’m going to do my best to convert it. Personal use. Newbie but I most definitely will check yawls website out for other items. I personally know how important it is for customers support so I am all about supporting small businesses. You said in one of your videos that your shop is in Texas. May I ask what town? I am in Texas as well. Would be awesome if y’all were close enough to come by your shop.

[@StraightOuttaContent]

@@terriboone2316 We are in Houston but our warehouse is in Katy. It’s not available to have customers come in. The store we did have in cypress is not gone. In regards to your converted printer i personally suggest it because it breaks the printer. Hence why we have videos talking about how we moved forward with a large true sublimation printer(we have a video of that). Those printers aren’t designed to print sublimation. If you have printer ink in yours then just leave it. Our rosin 2720 printer is 100% used for printing customer Heat press instructions. I hope this helps

[@faith3606]

I have a question if I take all the sublimation ink can I then put ecok solvent ink or no

[@StraightOuttaContent]

Old video, please check more recent videos on the channel

[@rachelmanchester4155]

How much do you recommend printing to cycle out the ink before printing and pressing on a tshirt?

[@vanessashellman5842]

Having trouble getting my subs to transfer now I'm thinking bc it's the old Inc. Did you figure this out?