How to Remove the Bumper on Honda Civic MK8 2007

[@andresilvasophisma]

11:26 Those are the headlight washers. If you use your windshield washers, while the headlights are turned on, those things come out and wash your headlights. I'm not english I don't know if those are the correct names but I think you understand. Those come on the versions with Xenon lights.

[@tamersaid81]

You can change the lights bulbs from inside unless you need to chang the whole front light.

[@henrir4362]

About to do the bumper myself for fog light replacement.What kind of clips, screws, etc connecters would you buy in advance if the broken clips need to be replaced?

[@davidblackburn9169]

This vids a few years old now but is there a loom for the headlights above the foglight? Mine got hit by a towbar now there's no power to the passenger side bulbs apart from the foglight thanks

[@steandanitahunt1890]

Alright mate do you reckon you could remove the intercooler by just removing the inner wheel arch cover and not the whole bumper? Cheers

[@EducationPineapple]

There's a bar that runs across the top. Remove that to access...seen one of my video where I changed the alternator

[@champmediauk]

Will this 2007 mk8 bumper fit my 2006 mk8 with no foglights? Im Finding it hard to find my exact make and im considering fitting a 2007 front bumper on my 2006 5door. Pls lemme know. Thanks

[@EducationPineapple]

It should fit

[@mrahmed7796]

Great video

[@colingovindasamy8708]

The owners manual says unscrew one bolt then move the light forward.does not say anything about removing the whole front bumper

[@tayyibmahmood567]

Would a Honda civic type R bumper fit on a type S bumper?

[@EducationPineapple]

I doubt it will fit properly

[@HassanKhan-mp8jf]

I've fitted a type r bumper to a 5 door its exactly the same but I had to get the side skirts and rest of bodykit to match. I believe it's an exact fit on a type s however

[@tayyibmahmood567]

@@HassanKhan-mp8jf appreciated it. I got a type R bumper and using the underskirt from a type s to connect it to my honda civic

[@HassanKhan-mp8jf]

@@tayyibmahmood567 yeah that should work

[@kudzy11]

@@tayyibmahmood567 how did it turn out? I'm looking for a bumper for a '10 type s GT-T , Not the plastic trim version

[@MallV0lli0]

indeed that is the headlight washer system; Thanks for the video

[@PAK-DAG-ISTAN-BUL-U7C]

When you say head light washers but I have an 07 plate 2.2cdti 5 door hatch but on me bumper I don't have any tiny holes for water to come out do thee head light washer system come on petrol models because I'm sure this car in this video is an 07 plate I'm a little confused because I've not come across a civic mark 8 come with head light washers also do they have little wipers because I think I've see volvo with wipers on thee bumpers for head lights

[@MallV0lli0]

@@PAK-DAG-ISTAN-BUL-U7C little wipers were a thing only for old cars which had glass headlights; Car nowadays have polycarbonate headlights and headlight washers = just jets

[@PAK-DAG-ISTAN-BUL-U7C]

@@MallV0lli0 aah I understand what you're saying appreciate for the reply I was literally thinking im not going to get a reply props dude 😉👍

[@PAK-DAG-ISTAN-BUL-U7C]

@@MallV0lli0 by thee way do you have an Honda civic. I've got a 07 plate 2.2cdti wanted to no if its possible to put dump valves in so when you change gears it makes a sound like a pusshh sound if you no ewt about dump valves can you please give us a shout would appreciate it dude 👍stay safe n blessed

[@trick_show9469]

My car, the wheel trim on the passenger side is lose, I can push it in, but it just pops back out. Any idea how to fix it?

[@EducationPineapple]

Try drilling a small hole and using a very thin 2mm cable tie

[@tennissimo8237]

Bro I have the same issue with my wheel trim passenger side.

[@nelsonlim8437]

Hi mate, just wondering are you able to pull the front bumper without a jack involved? Thanks

[@EducationPineapple]

you should be able to

[@luilui1931]

Great video thank you

[@ferrysmith3635]

Very nice effort 👍👍👍

[@robertgranberg6018]

ITS relatively easy to change lightbulbs on the headligts(both sides) But changing the fogligt bulb is a bit of a screwjob

[@SuperAleIndustries]

Screenwashers for the headlights

[@YTcmtr]

Annoying that I have to take apart half of the car to change the headlamp...

[@EducationPineapple]

I think you can change the bulbs by taking off the water bottle on the right side and the battery on the left. Changing the headlamp assembly, I'm afraid is a bumper removal first.

[@YouSt0leMyHe4rt]

You for sure havent take the radio off 😅

[@Takedown717]

Its headlight washers mate. Good video though thanks

[@lazyprepper5486]

Yeah video did its job - I needed to know what clips I needed for fender, arch bumper etc

[@crazyc3558]

Them things you didn't know what they was... maybe parking sensors? 🤔🤔🤔

[@EducationPineapple]

I found out much later that they are for the cars fitted with headlights that can react move up and down depending on how the front and rear axles are doing.

[@crazyc3558]

@@EducationPineapple cheers for your reply mate I just copped for a 2.2 s.i man needs drop links doing maybe new bumper if I can't repair it to a good standard! Some arch trims an maybe some mud gaurds an other plastic trim stuff... An a good clean inside man as its filthy! Got leather an think it's swade seats to could be a nice car just needs some tlc...

[@Darkened_Sol]

Hi, I'm trying to find a video on how to remove the rear bumper. Have you ever done this and is this a similar job? Thanks!

[@EducationPineapple]

I've never done the removal of the rear bumper. You'll probably find similar fasteners though.

[@thetruth7633]

I regret selling my EK, front bumper 5 minutes work

[@gogoasa333]

😂😂😂😂 Those are headlitight washers lad... 😂😂😂

[@marcogarofalo6343]

You have xenon headlights. 😁

[@EducationPineapple]

It's definitely blue coloured lights coming out, never had a look though.

[@fantomasfantomas]

pas top du tout