How To Remove The Exhaust From A 350Z OEM Exhaust Removal

[@dylanwilcox147]

Man’s a god amongst kids doing their shit in the street.

[@TheGpc13]

Yo this is the only actual helpful Z channel that I’ve seen lol

[@pauldethick6175]

Great video!!! I need to take my exhaust off to sort some rust issues and i just assumed that I would be fighting with the rubber mounts, bolts are much easier! Thanks

[@Paul-oh4fe]

Good tip on removing the bolts to the hangers instead of the hooks from the hangers. Made my life a lot easier.

[@fullthrottleperformance]

Haha, it is a lot easier lol

[@TrishZenCorner]

YESSSSSSSSSSSSSSSSS PLSSSSSS I have a 350z anniversary 2005 and I've had to learn how to do things myself due to mechanic stealing my money not doing the correct jobs or shady fixes THANK YOU SO MUCH FOR YOUR VIDEO!! not know how to keep track of how you put things back after taking it back how does one that knows nothing write things in order to be able to put them back on correctly is what I'm really asking here 😢❤😢

[@johnpearce4237]

Terrific data. Thanks

[@colbyx2]

great video man! super helpful

[@dfacedxa]

More videos like this. Thanks for sharing

[@fullthrottleperformance]

Thanks for the support, much appreciated!

[@dylanzion1011]

Very lucky man that those bolts aren’t rusted like mine lmao cough cough dremal

[@jasongotshadowbanned]

Yes, more videos like this! A good video on the cats would be appreciated.

[@fullthrottleperformance]

Okay, I'll do that one today then, should be relatively quick since the exhaust is already dropped

[@TheScudabear1]

Good vid but a few weeks too late for me coz i replaced oem with invidia gemini and got local guys to do the work...seeing this would've made me more confident n saved me some cash lol

[@fullthrottleperformance]

Ahhh, that sucks man. But hey, at least you know for the future tho.

[@jacoboliver2262]

awesome vid, put the rear left tire is looking bald. stay safe

[@Ieetshet]

Nah he balds them down for style

[@TurnTheStoveOnBlaze]

How did you know if the cats were bad?

[@fullthrottleperformance]

Excessive amount of movement of the honeycomb inside, basically if the insides of the cats move, exhaust gasses can pass the honeycomb and cause p0420 or p0430 codes.

[@narciso19G]

You should show how to remove the fuel pump and the float that shows how much fuel is in the car. My car needs a new fuel pump assembly and my gas gauge never reads right

[@fullthrottleperformance]

I can do this, should be able to within the next week

[@shadkowaleski1786]

Thanks for the video!

[@seangraffis7361]

Is it bad to run the car without that “W” brace under the midpipe? Just so it’s easier to remove/install the exhaust

[@fullthrottleperformance]

Nah, your good. Your probably not even gonna notice a difference when installed/not. I've had so many z's come in without it that I was happy when this one came in with a nice one, so I can replace my rusty ass one lol

[@joseruiz6184]

I have a question since you installed a motordyne exhaust on the 350 where did you put the ground since the exhaust is clamp on

[@fullthrottleperformance]

You really don't need it. I've seen it cut, or not even there so.. many.. times lol

[@Lewis14iz]

Very helpful, thank you

[@specialformula14]

A pillar gauge cluster. Can't figure out how to get it apart. Both sides of the interior plastic please !

[@fullthrottleperformance]

I don't quite understand what parts your talking about. You want the A-Pillar trims? But yours have gauges? And what side plastics?

[@specialformula14]

Full Throttle the inside plastic a-pilar. Both sides. I want to figure out how to take them off to install speaker tweeters

[@fullthrottleperformance]

Okay, no problem

[@TheDemonicDeity]

I fucked up and removed the y pipe from the cat leaving it bolted with the mid pipe and I don’t wanna drop the support bracket just to get them off

[@fullthrottleperformance]

You shouldn't have to, it should just be two 14mm nuts. So a regular 14mm wrench should work fine, or you can use a long extension

[@somebodycomewatchthis9021]

Yes

[@savanyvongvilay597]

I'll like for the video, thanks

[@sr.r3flix354]

I’ll like to see how to replace the VVT Solenoids

[@fullthrottleperformance]

Cool, thanks for the recommendation. I've got the VVT's on my list, and I'll definitely do a vid on them.

[@slowka]

Good vid

[@fullthrottleperformance]

Thanks bro!

[@7381366]

How to install Z1 slave cylinder relocation kit

[@fullthrottleperformance]

Honestly, a buddy just bought an HR and might want to do this. So, it might happen soon lol

[@andrew_._]

What size socket are you using at 4:10 in the video?

[@fullthrottleperformance]

14mm

[@andrewkaram6236]

Hey man do you know where I can get the 14MM from the mid pipe to the Y pipe? I want to know the exact specs because I can’t seem to find the right pattern

[@fullthrottleperformance]

I don't know the exact thread pitch, but here the dealer part number. It's only like a $1 at the dealer 08918-3401A