How to Remove the Stand from a Samsung Curved Monitor 🖥

This video shows you how to take off the stand from a Samsung Curved Monitor. It shows you how to remove the stand without using any screwdrivers or removing the back of the screen. The model shown in the video is C34G55TWWR, full model code is LC34G55TWWRXXU.

[@JMill77]

I love how this is the only video that exists on the internet for this, hats off to you sir

[@Kman1960]

Thank you for having the guts to show us all how it’s done ! I was afraid to pull on it for fear of breaking it. Cheers !

[@rachell6296]

Same!!! I can’t get the damn thing off!! 😢

[@uwebezner]

Me too

[@patrykbyq]

@@rachell6296ji😊😊o😊io op p

[@arthurburman3690]

anyone else knock themselves out doing this? also thanks for the brief down to earth video

[@how-to-videos]

Thanks for your comment and for watching. Please like, share and subscribe for more 👍

[@NotG0osee]

read this comment before watching the video thinking u were exaggerating, pulled my stand out and right into my face 🤣🤣

[@orchidotaku]

Not yet but I'll keep this in mind

[@Xurikyo]

I remember knocking myself out after having a lavalamp break on my head, haha.

[@alexanderunknown8605]

🤣🤣🤣

[@Tautolonaut]

Was not expecting this to work so easily, hit myself below the belt but worth it. Cheers.

[@Wolkyish]

Jesus christ, i waned to put my Screen on the arm and i thought that i have to break down whole thing to pull it off.... THANK YOU A LOT MAN! you saved me and probably my screen too :D

[@how-to-videos]

Glad you found this helpful 🤣😂 Please like, share and subscribe for more 😁

[@RJH_11]

I love the laugh sound from the last second of the video😂 “People don’t even know how to remove the stupid stand? Hahaha”

[@Zemex876]

Best video ever. I was scratching my head over this.

[@how-to-videos]

Thanks so much for the feedback and for watching! 😊 Please subscribe for more 🙏

[@alexzeyos]

thank you for this video, but I was afraid of breaking everything by pulling on it, so I used 2 plastic bicycle tire levers between the stand and the screen frame and the stand came easily!

[@how-to-videos]

Thanks very much for watching and commenting! Please like, share and subscribe for more! We really appreciate your support 🙏

[@mrtinman481]

You made my life so much easier with this. Thank you!

[@aashishVlogs25]

Hahahahah i was soo laughing out loud after looking at ur 50 sec video…… man i spend 30 mins to figure this thing out…… thanks a ton …. Count me in as ur new subscriber 😃😃😃

[@how-to-videos]

Thanks very much for watching and commenting. Please like, share, subscribe and say thanks. We appreciate your support 🙂

[@msamisimsekli]

The brute force solution is sometimes the best solution

[@bxfrmca]

😂 this video is still so helpful two years later

[@jupanu21]

bro, how do you remove the circles that light up from the back ? that are covering the holes for the desk stand

[@Stellaroptics]

Does it work with the same monitor that has the lock symbol in the back

[@SuomenMato]

Thanks alot, I bought one that was broken and was struggling to unassemble it so I can return it

[@how-to-videos]

Thanks very much for the comment and for watching 😁 Please like, share and subscribe for more!

[@majorschemer4872]

Excalibur was easier to remove from the stone than this stand from this monitor. Thank you!

[@BarbiieTwist]

do you know if there’s a possibility to add a more straight stand? i hate the curved ones but i have no clue how I would add a straight one

[@sostrymos]

Is the base adjustable?!? It seems stuck in on position. I have to put magazines under the base to lift it a bit...

[@COCBugsGlitches]

is there any way to wall mount it?

[@zaqalop]

whaaaaaat.... I spend hours for this... wow... thank you...

[@how-to-videos]

Thanks very much for the comment and for watching 😁 Please like, share and subscribe for more

[@i-know-alice3874]

Thanks, nice and simple straight to the point video

[@Tomzclipz22]

can you use the stock stand again after doing this?

[@e_solheim]

Can u put the stand back again?

[@beef7631]

Yeah lol I thought I would need to break that to take it out thanks man for showing us

[@PaulChannel96]

Thx mate, this helped me!

[@how-to-videos]

Thanks for the comment and for watching 😁 Please like, share and subscribe for more!

[@qrr1x]

Nice video bro!🔥✌🏼

[@davidinos73]

Thanks you're my savior

[@how-to-videos]

Thanks for commenting and watching! Please like, share, subscribe for more and say thanks if you can 🙏

[@paulskywalkertube]

This is the 3rd time im here. I'm an engineer. Memory isn't what it used to be 😂

[@musickhandz]

This was hilarious. Literally took 2 seconds after spending way more time trying to figure this out with a screwdriver. Lol

[@marcosporras6547]

Excellent video

[@how-to-videos]

Thanks very much for the comment! Please like, share and subscribe for more ☺️

[@TaylorS89]

Thanks man. Great video. Needed this

[@larscanders9008]

Great video. Thank you for posting!!

[@hydrateediting5763]

happy birthday bro have a good one!

[@how-to-videos]

Thanks very much! Please like, share and subscribe for more 😁

[@Marijoda]

Thank you mate !!!

[@how-to-videos]

Thanks very much for watching and commenting! Please like, share and subscribe for more! We really appreciate your support 🙏

[@vinoo89]

Dude thanks a lot. You saved me

[@how-to-videos]

Thanks for your comment and for watching. Please like, share and subscribe for more 🙂

[@thevigoguy3959]

You are absolute legend

[@how-to-videos]

Thanks so much for the positive feedback and for watching 😁 Please like, share and subscribe for more!

[@hugues4242]

Thanks dude 🙏

[@how-to-videos]

Thanks very much for the comment and for watching 😁 Please like, share and subscribe for more!

[@TyFnt_]

Thank you so much

[@how-to-videos]

Thanks for the comment and for watching 😁 Please like, share and subscribe for more!

[@uwebezner]

THANK YOU

[@how-to-videos]

Thanks very much for watching and commenting. Please like, share, subscribe and say thanks. We appreciate your support 🙂

[@seanmoodley7165]

Does anyone know how to get the stand in?

[@Vipapier_14]

Thank you bro

[@unleashthecarnage5813]

Thanks so much for this

[@how-to-videos]

You're welcome. Thanks for your comment and for watching. Please like,share and subscribe for more 👍

[@citycen01]

Thank you sir.

[@user-xx7vk7tn7d]

Thank you, dude

[@dongsp.]

Thank you my friend

[@how-to-videos]

Thanks for your comment and for watching 👍

[@NasralIah]

might doesnt budge i think its stuck

[@simonjanevski3658]

U SAVED MY LIFE

[@how-to-videos]

Thanks very much for your comment and for watching. Please like, share and subscribe for more 😁

[@EmreAta87]

Thanks

[@how-to-videos]

Thanks for commenting and watching! Please like, share, subscribe for more and say thanks if you can 🙏

[@lukewright2197]

happy birthday! ❤️

[@how-to-videos]

Thanks very much! Please like, share and subscribe for more 😁

[@codecthelios]

doing god's work with this one

[@obifuntoknowme]

Thanks very much 👍

[@nielsvisser6326]

Not all heroes wear capes

[@how-to-videos]

Thanks for the comment! Please like, share and subscribe for more ☺️

[@JustanotherJeeper]

Thanks!

[@jedbeardwoodlandrelichunte522]

I never knew it had a tilt feature all this time

[@how-to-videos]

Thanks very much for commenting and for watching! Please like, share and subscribe for more 🙏

[@mydloSA]

Thank you for your service

[@larrygorlitz]

Actually mine did not work that way I had to open up the back and remove two large screws.

[@how-to-videos]

Thanks for watching and for the feedback.

[@professorderweltmonde6521]

Thank u

[@jamesvespucci5527]

Huge ups boss

[@SourovDattacse]

fucking design. Thank you for your videos.

[@Parrtorias]

Ah F, mine have a lock that needs to be nudged with a tool but I don't know exactly the angle or the tool I need lol

[@apollo7807]

Hmm thats how i tried it before. Seems like mine is stuck somehow...

[@xouro]

Bless you

[@alexiteque3058]

I was also terrified to do this, thinking I was going to break the thing 😅

[@how-to-videos]

Ikr. Haha. Thanks for your comment and for watching 🙂

[@rometheus0019]

Genius

[@how-to-videos]

Thanks for your comment and for watching. Please like, share and subscribe for more 🙂

[@JumaaneRay]

Thank you my friend. Was asking myself how can I break this thing down for travel. You made it simple and easy!

[@how-to-videos]

Glad I could help! Thanks for your comment and for watching. Please like, share and subscribe for more 😁

[@michaltaranza365]

Thank you

[@Im_The_Goose]

Thank you so much

[@MrFantasticoRULES]

Thanks

[@SandzAllDay]

2 years later and this video is still saving lives! Thanks for the succinct breakdown.

[@sansyyy8788]

Literally just saved me as I'm packing up to go to NL

[@christinahayes7343]

Was testing one of these guys at work and was struggling on how to get the stand apart. Thanks a bunch. My coworker and I feel so stupid with how easy that actually was.

[@jamierobb6354]

Don't. It was a really poorly designed solution. Good UX it was NOT 🤣 I had to KZbin it too...

[@UNDEADWXRLORD]

There is 56k people just as stupid as you bro and me? I think I'm the dumbest in the bunch because I had to come here twice lol this is the second time it went for repairs forgot how

[@ProSandlin]

You're the best, spent 5 minutes messing about with hex wrenching trying to figure this out.

[@telkota1247]

Superb dude, short and to the point. No bullshit. Thanks 👍🏻

[@how-to-videos]

Thanks for your comment and for watching 😊

[@NickvanderMerwe-g8m]

Brilliantly simple when you know how! Thank you - worked like a dream.

[@how-to-videos]

Thanks very much for the comment and for watching 😁 Please like, share and subscribe for more!

[@BL-gk9pd]

🤣🤣🤣🤣 And me looking around it for buttons and screws for 30 min

[@robertshuxley]

thank you this also works on the 32 inch 4k model LU32J590UQEXXY

[@kimbosaki3834]

is there a monitor mount for this

[@elguitarTom]

Thanks! I hate this piece of shit TV. returning it. Samsung TV quaility are garbage

[@how-to-videos]

It's a monitor 😂

[@MFSINPSA]

I am not liking this stand setup very much

[@Sharn0Poison]

After some investigation and a bit of hesitation, that I might break something, I came here.... THANK YOU!!!

[@DoctorDisco42]

Thanks! One of the few easy to follow tutorials out there…

[@anarollec]

thank you so much!!!!

[@dkSilo]

Thanks. The description on the packaging was not helpful. You were! ❤

[@how-to-videos]

Thanks very much for your comment and for watching. Please like, share and subscribe for more. If you can please also 'Say Thanks'. 😊

[@lesliereason8868]

Thank you!

[@zabnat]

Thanks. Couldn't figure out on my own. Maybe if I was paying more attention when assembling.

[@how-to-videos]

Thanks very much for the comment and for watching 😁 Please like, share and subscribe for more!

[@stephenpowell4893]

thanks so much was thinking the same as others.that I was going to break the thing..and forgot how I put it together..

[@how-to-videos]

Thanks for the comment! Please like, share and subscribe for more ☺️

[@DownWithBureaucracy]

As this video continues seeing traffic, one has to ask if maybe it was a really bad design idea to make it work like this

[@how-to-videos]

Thanks very much for your comment and for watching. Please like, share and subscribe for more. If you can please also 'Say Thanks'. 😊

[@KittenParadise]

THANK YOU FOR THE VIDEO. Half an hour of me trying to find screws to unscrew and watching the wrong videos to find this one. I just wanna say I’m never buying another Samsung monitor again. LG ftw

[@McVerdict]

How would i mount this? Ive read online that no arm mount fits it

[@how-to-videos]

Thanks for your comment and for watching. Please like, share and subscribe for more 🙂

[@InstinctBassin]

Well I feel completely dumb now 😂

[@how-to-videos]

Don't feel dumb, it's incredibly unintuitive! Thanks for the comment and for watching, please like, share and subscribe for more 😁

[@alaschgari]

You saved my life bro!

[@Luciferthegam3r]

Omg I was misled about that screw and 35 minutes I have been trying I take it off, not after watching this it took me 10 seconds haha thank you

[@how-to-videos]

Thanks very much for your comment and for watching. Please like, share and subscribe for more 😁

[@LuisFerreiraTor]

Thanks!

[@JakeCR97]

I’ve been here for 10 mins trying to take the thing off and after watching this took one try and slid right off

[@how-to-videos]

Thanks for your comment and for watching. Please like, share and subscribe for more 🙂

[@MeatSim5]

Unreal man. Thanks! Sometimes you just gotta yank harder lol

[@how-to-videos]

Thanks for commenting and watching! Please like, share, subscribe for more and say thanks if you can 🙏

[@peternguyen3732]

yep had no idea.......had to youtube! almost had to pry open , stupid stand design

[@how-to-videos]

Yes very odd design, thanks for your comment and for watching 😊

[@FuslieNTR]

Lmao, before I watched the vid I got misled and unscrewed the bottom screw

[@how-to-videos]

Thanks for your comment and for watching. Please like, share and subscribe for more 🙂

[@jordancarter9772]

thanks mate, here is your like comment and subscribe for nice simple content.

[@how-to-videos]

You are most welcome! Thanks very much for supporting us 😊👏

[@jep1103]

Thank god I looked at this..I almost wrecked it..thank you

[@how-to-videos]

Thanks for the comment and for watching 😁 Please like, share and subscribe for more!

[@MarkulonMarkerson-sz1xs]

Wow, thanks so much. That is some annoying mechanical engineering.

[@how-to-videos]

Definitely! Thanks for watching and commenting 🙂

[@Tenju96]

Simple, efficient 😂 thanks. Let's try this now 😅

[@how-to-videos]

Thanks very much for commenting and for watching! Please like, share and subscribe for more 🙏