How to remove the steering clutch’s out of a HD6 Allis Chalmers.

How to remove a Drive clutch on a hd 6 allis charmers.

[@triggeral]

Love this Thank you for sharing your knowledge.

[@Grease1987]

Excellent video, I’m tackling my newly acquired hd6 steering clutches in the spring, mine are a lot rustier looking then yours though. Mines been sitting 10 years

[@DieselandIron]

It always amazes me how you guys know how to do this stuff. Unless I have a video walking me through the process I'm useless at wrenching.

[@mrandrewdennis1]

My grandfather and my dad helped me a long the way. I hope to pass the same down to my son. I helps when you work junk. lol thank you for watching and commenting!

[@integr8er66]

I have bought more old stuff I had no idea how to fix and now I have a stable full of working equipment, not the least of which is my HD6G that I got cheap because the main clutch was out of it. I had never worked on any heavy equipment before that.

[@brentboterhoek7999]

Awesome video. Thanks for taking the time to record this and share it. You'll help a whole lot of other people learn as well as your Son. 👍

[@mrandrewdennis1]

Thank you for watching. I really appreciate your kind words!

[@integr8er66]

@@mrandrewdennis1 Ya for the few of us that still have these this is pure GOLD! where did you get parts? I need new brake bands at some point, oil leaks from somewhere and mine are fouled.

[@darrelschulte6214]

I have an HD5G track loader that I have that project going on with. Steering clutches are the same between 5 and 6. Nice video‼️

[@justinweaver8787]

How many years has this machine been in ur family? I love it

[@magnificentshine1]

Cant wait till part 2. I'm pulling both my clutches out of my HD5G here after I finish my dam build. My HD5G has a HD6 rear on it so it's exactly the same as yours. I'm going to order my clutches and whatever else I need from general gear in Idaho. Quick question about the side access bolts you removed to get the pins out, did you just reach thru with a long bolt and punch them out? If not what did ya have to do? Also are you going to be replacing any bearings or seals inside on the clutch cage housing(the part that press against the clutch to disengage the clutches?

[@mrandrewdennis1]

Part two is up.

[@mrandrewdennis1]

I am not replacing bearings or seals.

[@darrenwallingford7560]

i have to do the same on mine, i bought it last year as a project and it seems to give me lots of troble

[@mlhrepairsllc6942]

Nice machine

[@robertmccully2792]

What is a kimco winch?

[@hughstoe9803]

Hey Dozer Dennis, how many hors did the whole job take? Thank you!

[@mrandrewdennis1]

Not sure? If I had to say 6 hours?

[@1181steveo]

I’m having problems with my steering clutches after burying it in my pond, I really hope I don’t have to get this far into it. I tried cleaning them out with gasoline hoping they will work

[@mrandrewdennis1]

It is not that bad of a job!

[@mrandrewdennis1]

Hopefully you can get it going

[@1181steveo]

Didn’t have to remove anything, tightened the brakes down, tied back the levers and stood on the brakes popped the clutch and broke free. Buried under water for over 3 months and this machine still runs like a champ

[@mrandrewdennis1]

@@1181steveo that is good news.

[@user-hl3fw4wd9s]

I had to replace the rear end bevel gear and transmission on my hd6

[@soupertrooper3864]

Are the steering clutches on the HD5 the same as the 6?

[@mrandrewdennis1]

They should be very close

[@jonjohnsonsr4960]

Hey well brake band it's self come out with out haveing to pull the clutch

[@mrandrewdennis1]

That doesn’t sound good.

[@jonjohnsonsr4960]

@@mrandrewdennis1 dose band come out with out the whole clutchs & all comeing out¿¿¿¿¿¿

[@mrandrewdennis1]

Yes

[@jonjohnsonsr4960]

@@mrandrewdennis1 ok dose tracks have to turn cuz I can't seem to get the bottom Part of band our